Hydrogeology and Development and Abstract The New Jersey Department of Environmental Protection (NJDEP) Well Head Protection Program, developed in response to the 1986 Federal Safe Drinking Water Act Amendments, requires delineation of Well Head Protection Areas (WHPA’s), commonly called contributing areas, for all public and non-community water-supply wells in New Jersey. Typically, WHPA’s for public community water-supply wells in New Jersey are delineated using a two-dimensional ground-water flow model incorporating the regional hydraulic gradient; however, NJDEP guidelines allow for the use of a three-dimensional flow model to delineate contributing areas to wells in complex hydrogeologic settings. The Puchack well field in Pennsauken Township, Camden County, N.J., is an area of strong hydraulic connection between the Lower aquifer of the Potomac-Raritan-Magothy aquifer system and the Delaware River. Interactions among and within the public-supply well fields in the area are complex. To includes boundary and horizontal from feet Values basis of variations hydrogeologic in geophysical logs from calculated from measured water levels. The existing flow model was modified to meet NJDEP guidelines for delineating contributing areas in complex hydrogeologic settings. These modifications included rediscretizing the model grid to a finer grid and preparing the water-use data set for use in the rediscretized model. The contributing area to the Puchack well field was delineated by means of particle tracking. An uncertainty analysis was conducted in which 36 model-input parameters were both increased and decreased until the resulting change in simulated heads exceeded the model-calibration criterion of ± 5 feet at any model cell. Porosity most affected the size and shape of the contributing area. The distribution of withdrawals at the Morris/Delair well field and variations in recharge affected both the size and shape of contributing area to the Puchack well field and the source of water to the Puchack wells. The results of the uncertainty analysis were combined to determine the “aggregate” contributing area to the Puchack well field—a composite of areas on the land surface that contributed flow to the Puchack well field in less than 12 years in any uncertainty simulation. The shape of the aggregate contributing area was most similar to that associated with a reduction in porosity, which indirectly affected the size and shape of the contributing areas by changing travel time.
[1]
W. Kinzelbach.
Applied groundwater modeling — Simulation of flow and advective transport
,
1992
.
[2]
Stanley A. Leake,et al.
Documentation of computer program (FHB1) for assignment of transient specified-flow and specified-head boundaries in applications of the modular finite-diference ground-water flow model (MODFLOW)
,
1997
.
[3]
Leonard L. Orzol,et al.
User's guide for MODTOOLS: Computer programs for translating data of MODFLOW and MODPATH into geographic information system files
,
1997
.
[4]
Arlen W. Harbaugh,et al.
User's documentation for MODFLOW-96, an update to the U.S. Geological Survey modular finite-difference ground-water flow model
,
1996
.
[5]
David W. Pollock,et al.
User's guide for MODPATH/MODPATH-PLOT, Version 3; a particle tracking post-processing package for MODFLOW, the U.S. Geological Survey finite-difference ground-water flow model
,
1994
.
[6]
P. B. Duran.
Distribution of bottom sediments and effects of proposed dredging in the ship channel of the Delaware River between northeast Philadelphia, Pennsylvania and Wilmington, Delaware, 1984
,
1986
.
[7]
O. S. Zapecza.
Hydrogeologic framework of the New Jersey coastal plain
,
1984
.
[8]
J. Owens,et al.
Upper Cenozoic sediments of the lower Delaware Valley and the northern Delmarva Peninsula, New Jersey, Pennsylvania, Delaware, and Maryland
,
1979
.
[9]
Seymour Subitzky,et al.
GEOLOGY AND GROUND-WATER RESOURCES OF
,
1968
.