论文信息 - Geometric Design of Spatial PRR Manipulators Using Polynomial Elimination Techniques

Geometric Design of Spatial PRR Manipulators Using Polynomial Elimination Techniques

This paper studies the geometric design of spatial open loop prismatic-revolute-revolute (PRR) robot manipulators. Four spatial positions and orientations are defined and the dimensions of the geometric parameters of the PRR manipulator are computed so that the manipulator will be able to place its end-effector at these four pre-specified locations. Denavit and Hartenberg parameters and 4×4 homogeneous matrices are used to formulate the design equations. Polynomial Elimination techniques are used to solve these equations and twelve geometrically different solutions are found.Copyright © 2002 by ASME

Constantinos Mavroidis | Eric Lee

[1] C. Innocenti. Polynomial Solution of the Spatial Burmester Problem , 1995 .

[2] F. Freudenstein. Advanced mechanism design: Analysis and synthesis: Vol. 2, by G. N. Sandor and A. G. Erdman. Prentice-Hall Inc., Englewood Cliffs, New Jersey, 1984, 688 p , 1985 .

[3] Andrew P. Murray,et al. Burmester Lines of Spatial Five Position Synthesis from the Analysis of a 3-CPC Platform , 1999 .

[4] Ferdinand Freudenstein. Mechanism design: Analysis and synthesis , 1985 .

[5] Donald Lee Pieper. The kinematics of manipulators under computer control , 1968 .

[6] Constantinos Mavroidis,et al. A New Polynomial Solution to the Geometric Design Problem of Spatial R-R Robot Manipulators Using the Denavit and Hartenberg Parameters , 2001 .

[7] J. M. McCarthy,et al. Dimensional Synthesis of Spatial RR Robots , 2000 .

[8] Lung-Wen Tsai,et al. A note on the design of revolute-revolute cranks , 1973 .

[9] Arthur G. Erdman,et al. Mechanism Design : Analysis and Synthesis , 1984 .

[10] Bernard Roth,et al. Elimination Methods for Spatial Synthesis , 1995 .

[11] B. Roth. Analytical Design of Two-Revolute Open Chains , 1987 .