ZrB2 powders prepared by boro/carbothermal reduction of ZrO2: The effects of carbon source and reaction atmosphere

Abstract ZrB 2 powders with different particle size or different morphologies have been synthesized by boro/carbothermal reduction (BCTR) method using ZrO 2 , B 4 C and graphite or carbon black as starting materials in this work. Results revealed that the carbon black with fine particles decreased the synthesis temperature and resulted in a finer ZrB 2 powder compared with graphite in vacuum. However, the synthesis temperature was almost the same for both the carbon black and graphite cases if the reaction took place in argon atmosphere. Furthermore, vacuum atmosphere led to the formation of rod-like ZrB 2 powder, whereas argon atmosphere resulted in quasi-spherical ZrB 2 powder. Thermodynamic calculation was conducted and possible mechanisms were discussed for understanding the above phenomena.

[1]  Hong Zhao,et al.  Preparation of Zirconium Boride Powder , 1995 .

[2]  Q. Nguyen,et al.  Oxidation of Ultrahigh Temperature Ceramics in Water Vapor , 2004 .

[3]  Jonathan A. Salem,et al.  Evaluation of ultra-high temperature ceramics foraeropropulsion use , 2002 .

[4]  G. Hilmas,et al.  Effect of Starting Particle Size and Oxygen Content on Densification of ZrB2 , 2011 .

[5]  A. Khanra,et al.  Double SHS of ZrB2 powder , 2008 .

[6]  Guo‐Jun Zhang,et al.  Synthesis of monodispersed fine hafnium diboride powders using carbo/borothermal reduction of hafnium dioxide , 2008 .

[7]  G. Hilmas,et al.  Mechanical properties of sintered ZrB2–SiC ceramics , 2011 .

[8]  P. Peshev,et al.  On the borothermic preparation of titanium, zirconium and hafnium diborides , 1968 .

[9]  L. Sneddon,et al.  Polymer-Precursor Routes to Metal Borides: Syntheses of TiB2 and ZrB2. , 1991 .

[10]  A. I. Karasev.  Preparation of technical zirconium diboride by the carbothermic reduction of mixtures of zirconium and boron oxides , 1973 .

[11]  J. Zaykoski,et al.  Oxidation-based materials selection for 2000°C + hypersonic aerosurfaces: Theoretical considerations and historical experience , 2004 .

[12]  Guo‐Jun Zhang,et al.  Combustion synthesis of ZrB2―SiC composite powders ignited in air , 2009 .

[13]  J. Vleugels,et al.  ZrB2 Powders Synthesis by Borothermal Reduction , 2010 .

[14]  Guo‐Jun Zhang,et al.  Synthesis of Ultra‐Fine Hafnium Carbide Powder and its Pressureless Sintering , 2010 .

[15]  L. Sneddon,et al.  Polymer-precursor routes to metal borides: synthesis of titanium boride (TiB2) and zirconium boride (ZrB2) , 1991 .

[16]  Guo‐Jun Zhang,et al.  Reaction Processes and Characterization of ZrB2 Powder Prepared by Boro/Carbothermal Reduction of ZrO2 in Vacuum , 2009 .

[17]  W. K. Chan,et al.  Luminescent and structural properties of ZnO nanorods prepared under different conditions , 2003 .

[18]  William G. Fahrenholtz,et al.  Refractory Diborides of Zirconium and Hafnium , 2007 .

[19]  A. Khanra,et al.  Carbothermal synthesis of zirconium diboride (ZrB2) whiskers , 2007 .