论文信息 - The error modeling and accuracy synthesis of a 3-DOF parallel robot Delta-S

The error modeling and accuracy synthesis of a 3-DOF parallel robot Delta-S

In this paper, some key issues of a 3-DOF parallel manipulator named Delta-S is developed, such as error modeling, sensitivity analysis, and accuracy synthesis. Firstly, the characteristics of Delta-S are analyzed and its error mapping function is formulated in the following. Secondly, the sensitivity analysis is carried out to find the source errors which affect the pose accuracy of the end-effecter in terms of the error model. Finally, the accuracy synthesis is implemented to obtain the geometry tolerance of the major parts affecting the uncompensable pose error. In order to finish these works, one method is proposed, which can also be used to handle the similar mechanism.

Yi Li | Jiangping Mei | Yanbin Ni | Liangan Zhang | Fengcheng Liu

[1] Zexiang Li,et al. Singularities of parallel manipulators: a geometric treatment , 2003, IEEE Trans. Robotics Autom..

[2] Jian Wang,et al. On the accuracy of a Stewart platform. II. Kinematic calibration and compensation , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[3] Tian Huang,et al. A Simple yet Effective Approach for Error Compensation of a Tripod-Based Parallel Kinematic Machine , 2000 .

[4] Kornel Ehmann,et al. Volumetric Error Analysis of a Stewart Platform-Based Machine Tool , 1997 .

[5] John M. Hollerbach,et al. A survey of kinematic calibration , 1989 .

[6] Luca Bruzzone,et al. Constraint Singularities of Force Transmission in Nonredundant Parallel Robots With Less Than Six Degrees of Freedom , 2003 .

[7] Wisama Khalil,et al. Identifiable parameters for parallel robots kinematic calibration , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).