Determination of kinetic parameters in fixed-film bio-reactors: an inverse problem approach

Processes employing bio-films are increasingly used nowadays for wastewater purification, because they are perceived to be highly efficient compared to the physical or chemical methods of treatment. Mathematical modelling of some of the bio-film processes is not always straightforward, however. A case in point is the fixed-film bioreactors, which have a microbial film attached to a solid inert packing material. The problem is mainly due to the difficulty in obtaining proper kinetic information about the biological reactions taking place in the bio-films. Some attempts have been reportedly made to determine these experimentally but the outcome is not wholly satisfactory. An alternative methodology is proposed in the present work, which makes use of a novel optimization method to evaluate the bio-kinetic parameters, in the course of the solution of an inverse problem with the aid of measured data of fractional conversion of the substrate. In this context, the importance of using a rigorous mathematical model to obtain an accurate estimate of the kinetics is emphasized. Also highlighted is the need to account for the variation of the bio-film thickness in the reactor and its dependence on the organic and the hydraulic loading rates.

[1]  G. Froment,et al.  Chemical Reactor Analysis and Design , 1979 .

[2]  E. S. K. Chian,et al.  Kinetics of substrate removal in a completely mixed anaerobic filter , 1976 .

[3]  Ju S. Huang,et al.  Effect of biofilm thickness distribution on substrate-inhibited kinetics , 1994 .

[4]  P. Mccarty,et al.  Model of steady-state-biofilm kinetics. , 1980, Biotechnology and bioengineering.

[5]  B. Rittman,et al.  The effect of shear stress on biofilm loss rate. , 1982, Biotechnology and bioengineering.

[6]  S. N. Upadhyay,et al.  Particle-Fluid Mass Transfer in Fixed and Fluidized Beds , 1977 .

[7]  P. Huck,et al.  Parameter estimation for biofilm processes in biological water treatment , 1996 .

[8]  G. Alaerts,et al.  Influence of reactor type and shear stress on aerobic biofilm morphology, population and kinetics , 1995 .

[9]  P. Huck,et al.  Removal of AOC in biological water treatment processes: A kinetic modeling approach , 1996 .

[10]  V. Lazarova,et al.  Biofilm characterization and activity analysis in water and wastewater treatment , 1995 .

[11]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[12]  C. Skowlund,et al.  Simplified models for packed‐bed biofilm reactors , 1989, Biotechnology and bioengineering.

[13]  Richard A. Johnson.  Miller & Freund's Probability and Statistics for Engineers , 1993 .

[14]  T. Nandy,et al.  Evaluation of kinetic constants for anaerobic fixed film fixed bed reactors treating tannery wastewater , 2001 .

[15]  W. Shieh,et al.  Evaluation of intrinsic and inhibition kinetics in biological fluidized bed reactors , 1995 .

[16]  Perry L. McCarty,et al.  Evaluation of steady‐state‐biofilm kinetics , 1980 .

[17]  Y. Cohen,et al.  Biofiltration--the treatment of fluids by microorganisms immobilized into the filter bedding material: a review. , 2001, Bioresource technology.

[18]  J. Rintala,et al.  Evaluation of kinetic coefficients using integrated monod and haldane models for low-temperature acetoclastic methanogenesis. , 2001, Water research.

[19]  Smets,et al.  Respirometric assay for biofilm kinetics estimation: parameter identifiability and retrievability , 1998, Biotechnology and bioengineering.

[20]  Andrew G. Livingston,et al.  Modeling phenol degradation in a fluidized-bed bioreactor , 1989 .

[21]  B. Rittmann,et al.  In situ determination of kinetic parameters for biofilms: Isolation and characterization of oligotrophic biofilms , 1986, Biotechnology and bioengineering.

[22]  B. Finlayson.  Nonlinear analysis in chemical engineering , 1980 .