Micropumps operated by swelling and shrinking of temperature-sensitive hydrogels.

This paper describes two types of polymeric micropumps based on the temperature-sensitive hydrogel poly(N-isopropylacrylamide). The gel actuators are realised as photopolymerised patterns and microgels. They are electrothermically controlled by resistive heating elements. The diffusion-based micropump contains a photopatterned monolithic actuator, which is placed within the pump chamber, and provides a valveless single layer set-up. The diffusion micropump is intended for low performance applications and can operate in two modes: peristaltic or pulsatile. The maximum operating parameters are a flow rate of 2.8 +/- 0.35 microl min(-1) and a back pressure of 1.28 kPa. The second type, a displacement pump, provides a higher performance (maximal 4.5 microl min(-1) and 15 kPa). The pump comprises a microgel-based actuator, which is placed within a separate actuator layer, and active microvalves. The specific features of the design and performance of the pumps are discussed.

[1]  S. Quake,et al.  Monolithic microfabricated valves and pumps by multilayer soft lithography. , 2000, Science.

[2]  Juan G. Santiago,et al.  A review of micropumps , 2004 .

[3]  K. Arndt,et al.  Adjustable low dynamic pumps based on hydrogels , 2004 .

[4]  J L West,et al.  Independent Optical Control of Microfluidic Valves Formed from Optomechanically Responsive Nanocomposite Hydrogels , 2005, Advanced materials.

[5]  A. K. Agarwal,et al.  Adaptive liquid microlenses activated by stimuli-responsive hydrogels , 2006, Nature.

[6]  Toyoichi Tanaka,et al.  Phase transition in polymer gels induced by visible light , 1990, Nature.

[7]  Andreas Richter,et al.  Influence of volume phase transition phenomena on the behavior of hydrogel-based valves , 2004 .

[8]  Andreas Richter,et al.  Mechanically adjustable chemostats based on stimuli-responsive polymers , 2007 .

[9]  Masahiro Irie,et al.  Stimuli-responsive polymers: chemical induced reversible phase separation of an aqueous solution of poly(N-isopropylacrylamide) with pendent crown ether groups , 1993 .

[10]  Toyoichi Tanaka,et al.  Collapse of Gels in an Electric Field , 1982, Science.

[11]  Thomas Thundat,et al.  Detection of CrO4(2-) using a hydrogel swelling microcantilever sensor. , 2003, Analytical chemistry.

[12]  Robert H. Davis,et al.  A water-activated pump for portable microfluidic applications. , 2007, Journal of colloid and interface science.

[13]  Andreas Richter,et al.  Controlled Double‐Sensitivity of Microgels Applied to Electronically Adjustable Chemostats , 2007 .

[14]  J. Rühe,et al.  Swellable Surface‐Attached Polymer Microlenses with Tunable Focal Length , 2007 .

[15]  G. Gerlach,et al.  Chemical and pH sensors based on the swelling behavior of hydrogels , 2005 .

[16]  Robin H. Liu,et al.  Functional hydrogel structures for autonomous flow control inside microfluidic channels , 2000, Nature.

[17]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.

[18]  Andreas Richter,et al.  Application of sensitive hydrogels in flow control , 2000 .

[19]  Jens Lienig,et al.  Review on Hydrogel-based pH Sensors and Microsensors , 2008, Sensors.

[20]  Toyoichi Tanaka.  Collapse of Gels and the Critical Endpoint , 1978 .

[21]  Andreas Richter,et al.  Poly(vinyl alcohol)/poly(acrylic acid) hydrogels: FT-IR spectroscopic characterization of crosslinking reaction and work at transition point , 1999 .

[22]  Andreas Richter,et al.  Electronically controllable microvalves based on smart hydrogels: magnitudes and potential applications , 2003 .

[23]  Yoshihito Osada,et al.  Soft and Wet Materials: Polymer Gels , 1998 .

[24]  Vijay S. Pande,et al.  Polymer gels that can recognize and recover molecules , 1995 .

[25]  Toyoichi Tanaka,et al.  Kinetics of swelling of gels , 1979 .

[26]  Curtis W. Frank,et al.  A microfluidic actuator based on thermoresponsive hydrogels , 2003 .

[27]  D. Beebe,et al.  A valved responsive hydrogel microdispensing device with integrated pressure source , 2004, Journal of Microelectromechanical Systems.

[28]  Frantisek Svec,et al.  Thermally responsive rigid polymer monoliths , 1997 .

[29]  A. Manz,et al.  Miniaturized total chemical analysis systems: A novel concept for chemical sensing , 1990 .

[30]  Hiroaki Suzuki,et al.  A disposable intelligent mosquito with a reversible sampling mechanism using the volume-phase transition of a gel , 2002 .

[31]  Frantisek Svec,et al.  Flow control valves for analytical microfluidic chips without mechanical parts based on thermally responsive monolithic polymers. , 2003, Analytical chemistry.

[32]  Yuandong Gu,et al.  A hydrogel-actuated environmentally sensitive microvalve for active flow control , 2003 .

[33]  Shu Yang,et al.  Self-Actuated, Thermo-Responsive Hydrogel Valves for Lab on a Chip , 2005, Biomedical microdevices.

[34]  Jongseong Kim,et al.  Bioresponsive hydrogel microlenses. , 2005, Journal of the American Chemical Society.