Orthogonal Frequency Coded SAW Sensors for Aerospace SHM Applications

National Aeronautics and Space Administration (NASA) aeronautical programs require structural health monitoring (SHM) to ensure the safety of the crew and the vehicles. Future SHM sensors need to be small, lightweight, inexpensive, and wireless. Orthogonal frequency coded (OFC) surface acoustic wave (SAW) reflectors and transducers have been recently introduced for use in communication, as well as in sensor and radio-frequency identification (RFID) tag applications (Malocha , 2004, Puccio , 2004). The OFC SAW technology approach has been investigated by NASA for possible inclusion in ground, space flight, and space exploration sensor applications. In general, SAW technology has advantages over other potentially competitive technologies, because the devices can operate in ranges from cryogenic to furnace temperature. SAW devices can also be small, rugged, passive, wireless, and radiation hard and can operate with variable frequency and bandwidth. SAW sensor embodiments can provide onboard device sensor integration or can provide integration with an external sensor that uses the SAW device for encoding the sensor information and transmission to the receiver. SAW OFC device technology can provide RFID tags and sensors with low loss, large operating temperatures, and a multiuse sensor platform. This paper will discuss the key parameters for OFC device design, which includes reflector and transducer design, coding diversity approaches, and insertion loss considerations. Examples of several OFC device sensors and RFID tags are presented to show the current state-of-the-art performance for several NASA applications. Projections for future sensor and RFID tag platform performance are discussed, along with some of the current challenges and issues of the technology.

[1]  Donald L. Simon,et al.  Sensor Needs for Control and Health Management of Intelligent Aircraft Engines , 2004 .

[2]  Vaios Lappas,et al.  Characterising Wireless Sensor Motes for Space Applications , 2007, Second NASA/ESA Conference on Adaptive Hardware and Systems (AHS 2007).

[3]  N. Saldanha,et al.  SAW Parameters on Y-cut Langasite Structured Materials , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[4]  S. D. Ishmael,et al.  Technical Findings, Lessons Learned, and Recommendations Resulting from the Helios Prototype Vehicle Mishap , 2007 .

[5]  W. Buff,et al.  High-temperature 434 MHz surface acoustic wave devices based on GaPO/sub 4/ , 2006, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[6]  D.C. Malocha,et al.  Orthogonal frequency coding for SAW device applications , 2004, IEEE Ultrasonics Symposium, 2004.

[7]  D.R. Gallagher,et al.  Orthogonal frequency coded filters for use in ultra-wideband communication systems , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[8]  D.R. Gallagher,et al.  Orthogonal frequency coding for SAW tagging and sensors , 2006, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[9]  George N. Szatkowski,et al.  Small Aircraft RF Interference Path Loss Measurements , 2007 .

[10]  W. H. Prosser,et al.  Development of Structural Health Management Technology for Aerospace Vehicles , 2003 .

[11]  Derek Puccio,et al.  Design, Analysis And Implementation Of Orthogonal Frequency Coding In Saw Devices Used For Spread Spectrum Tags And Sensors , 2006 .

[12]  Brooks A. Childers,et al.  Use of 3000 Bragg grating strain sensors distributed on four 8-m optical fibers during static load tests of a composite structure , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[13]  R.G. Maev,et al.  Inline SAW RFID tag using time position and phase encoding , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[14]  D.C. Malocha,et al.  SAW sensors using orthogonal frequency coding , 2004, Proceedings of the 2004 IEEE International Frequency Control Symposium and Exposition, 2004..

[15]  S. G. Allison,et al.  Use of 3000 Bragg grating strain sensors distributed on four eight-meter optical fibers during static load tests of a composite structure , 2001 .

[16]  Hoang Trang,et al.  Temperature-Compensated Structure For Saw Pressure Sensor In Very High Temperature , 2007, 2007 IEEE International Frequency Control Symposium Joint with the 21st European Frequency and Time Forum.

[17]  Arnaldo D'Amico,et al.  Hydrogen Sensor Using a Palladium Coated Surface Acoustic Wave Delay-Line , 1982 .

[18]  Theodore Brooke Smith,et al.  DEVELOPMENT AND GROUND TESTING OF DIRECT MEASURING SKIN FRICTION GAGES FOR HIGH ENTHALPY SUPERSONIC FLIGHT TESTS , 2002 .

[19]  Prabir K. Dutta,et al.  Development of chemical sensor arrays for harsh environments and aerospace applications , 2002, Proceedings of IEEE Sensors.

[20]  L. M. Miller,et al.  Space Sensors form Human Investigation of Planetary Surfaces (SpaceSHIPS) , 1999 .

[21]  D. Peroulis,et al.  Early-Warning Wireless Telemeter for Harsh-Environment Bearings , 2007, 2007 IEEE Sensors.

[22]  W. J. Stapor,et al.  Ionizing space radiation effects on surface acoustic wave resonators , 1991 .

[23]  D.C. Malocha,et al.  Cryogenic Liquid Sensing Using SAW Devices , 2007, 2007 IEEE International Frequency Control Symposium Joint with the 21st European Frequency and Time Forum.

[24]  K. Elliott Cramer,et al.  Characterization of Effluents Given off by Wiring Insulation , 2004 .

[25]  M. Pereira da Cunha,et al.  Dual configuration high temperature hydrogen sensor on LGS SAW devices , 2004, IEEE Ultrasonics Symposium, 2004.

[26]  C. Hartmann,et al.  A global SAW ID tag with large data capacity , 2002, 2002 IEEE Ultrasonics Symposium, 2002. Proceedings..

[27]  James Brusey,et al.  Aero-ID sensor integration: scope of work , 2006 .