Precious metals recovery from waste printed circuit boards: A review for current status and perspective

Nowadays, rapid economic growth, continuous technological innovation and the improvement of living standards have result in large amounts of waste electric and electronic equipment (WEEE). Amongst all these WEEE, waste printed circuit boards (WPCBs) are considered as the most valuable components due to precious metals contained. Previous studies found that the presence of precious metals are richer in WPCBs than in typical metal mines, which are driven recycling precious metals from WPCBs to a profitable business without proper pollution controls in developing countries. However, recovering precious metals from WPCBs is a challenge because WPCBs are both valuable and harmful simultaneously, which are caused by their complex materials makeup. Hence, the proper technologies to recycle metals from WPCBs without negative effects to the environment and human health are urgent and essential. In this article, the current metals recycling technologies from WPCBs are reviewed. Then, an integrated technological route, including metals enrichment and precious metals recovery, is proposed. Finally, in order to promote the development of metals (precious metals) recovery from WPCBs, some improvements and recommendations in techniques and the future trend are also put forward.

[1]  Xiaodong Zhu,et al.  Examining the technology acceptance for dismantling of waste printed circuit boards in light of recycling and environmental concerns. , 2011, Journal of environmental management.

[2]  Zhenming Xu,et al.  Assessment of noise and heavy metals (Cr, Cu, Cd, Pb) in the ambience of the production line for recycling waste printed circuit boards. , 2012, Environmental science & technology.

[3]  Atsushi Terazono,et al.  E-waste recycling processes in Indonesia, the Philippines, and Vietnam: A case study of cathode ray tube TVs and monitors , 2016 .

[4]  Tuomo Sainio,et al.  Ion exchange recovery of silver from concentrated base metal-chloride solutions , 2015 .

[5]  Zhenming Xu,et al.  Disposing and recycling waste printed circuit boards: disconnecting, resource recovery, and pollution control. , 2015, Environmental science & technology.

[6]  Zhenming Xu,et al.  Response to waste electrical and electronic equipments in China: legislation, recycling system, and advanced integrated process. , 2012, Environmental science & technology.

[7]  Pengcheng Li,et al.  Recovery of silver (I) using a thiourea-modified chitosan resin. , 2010, Journal of hazardous materials.

[8]  Mohammad Mehdi Salarirad,et al.  Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize on palladium and gold leaching and precipitation. , 2013, Waste management.

[9]  Mingfei Xing,et al.  Degradation of brominated epoxy resin and metal recovery from waste printed circuit boards through batch sub/supercritical water treatments , 2013 .

[10]  John Baxter,et al.  Environmental message framing: Enhancing consumer recycling of mobile phones , 2016 .

[11]  J. Schnoor,et al.  E-waste recycling: where does it go from here? , 2012, Environmental science & technology.

[12]  Lifeng Zhang,et al.  Metallurgical recovery of metals from electronic waste: a review. , 2008, Journal of hazardous materials.

[13]  E. Gock,et al.  Leaching of gold, silver and accompanying metals from circuit boards (PCBs) waste , 2011 .

[14]  Paul A. Kohl,et al.  Electrochemical Study of the Gold Thiosulfate Reduction , 1997 .

[15]  Jia Li,et al.  Environmental friendly automatic line for recovering metal from waste printed circuit boards. , 2010, Environmental science & technology.

[16]  Shafiq Alam,et al.  Selective Recovery of Precious Metals from Acidic Leach Liquor of Circuit Boards of Spent Mobile Phones Using Chemically Modified Persimmon Tannin Gel , 2012 .

[17]  Yaakov Garb,et al.  A model for partnering with the informal e-waste industry: Rationale, principles and a case study , 2015 .

[18]  Jinki Jeong,et al.  Dissolution behaviour of platinum by electro‐generated chlorine in hydrochloric acid solution , 2013 .

[19]  Shafiq Alam,et al.  Recovery of gold and silver from spent mobile phones by means of acidothiourea leaching followed by adsorption using biosorbent prepared from persimmon tannin , 2013 .

[20]  Ata Akcil,et al.  A Potential Alternative for Precious Metal Recovery from E-waste: Iodine Leaching , 2015 .

[21]  Richard Stone,et al.  China. Confronting a toxic blowback from the electronics trade. , 2009, Science.

[22]  Xin Tong,et al.  Transnational Flows of E-Waste and Spatial Patterns of Recycling in China , 2004 .

[23]  E. Guibal,et al.  Gold(III) Recovery From HCl Solutions using Amberlite XAD-7 Impregnated with an Ionic Liquid (Cyphos IL-101) , 2010 .

[24]  Oladele A. Ogunseitan,et al.  Electronic waste disassembly with industrial waste heat. , 2013, Environmental science & technology.

[25]  Mihai Buzatu,et al.  Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery. , 2013, Waste management.

[26]  Dong Li,et al.  Recovery of metal values from waste printed circuit boards using an alkali fusion–leaching–separation process , 2015 .

[27]  Hiroshi Hasegawa,et al.  Adsorption of platinum (IV), palladium (II) and gold (III) from aqueous solutions onto L-lysine modified crosslinked chitosan resin. , 2007, Journal of hazardous materials.

[28]  Fu-Shen Zhang,et al.  Size-controlled preparation of Cu2O nanoparticles from waste printed circuit boards by supercritical water combined with electrokinetic process. , 2012, Journal of hazardous materials.

[29]  Jie Guo,et al.  Dynamics of spherical metallic particles in cylinder electrostatic separators/purifiers. , 2008, Journal of hazardous materials.

[30]  Zhenming Xu,et al.  Application of supercritical water to decompose brominated epoxy resin and environmental friendly recovery of metals from waste memory module. , 2015, Environmental science & technology.

[31]  Gaofeng Zhao,et al.  Concentrations of selected heavy metals in food from four e-waste disassembly localities and daily intake by local residents , 2010, Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering.

[32]  Jacques Eksteen,et al.  Direct leach approaches to Platinum Group Metal (PGM) ores and concentrates: A review , 2015 .

[33]  Mehdi Rahmani,et al.  Estimation of waste from computers and mobile phones in Iran , 2014 .

[34]  Jie Guo,et al.  Recycling of waste printed circuit boards: a review of current technologies and treatment status in China. , 2009, Journal of hazardous materials.

[35]  Khandakar Habib Al Razi,et al.  Resourceful recycling process of waste desktop computers: A review study , 2016 .

[36]  Anna Björklund,et al.  Social impact assessment of informal recycling of electronic ICT waste in Pakistan using UNEP SETAC guidelines , 2015 .

[37]  Bernd Kopacek,et al.  An advanced study on the hydrometallurgical processing of waste computer printed circuit boards to extract their valuable content of metals. , 2014, Waste management.

[38]  Guangming Li,et al.  WEEE recovery strategies and the WEEE treatment status in China. , 2006, Journal of hazardous materials.

[39]  Yonglong Lu,et al.  A review of human exposure to polybrominated diphenyl ethers (PBDEs) in China. , 2013, International journal of hygiene and environmental health.

[40]  M. Ojeda,et al.  Gold extraction by chlorination using a pyrometallurgical process , 2009 .

[41]  Jia Li,et al.  Recycle technology for recovering resources and products from waste printed circuit boards. , 2007, Environmental science & technology.

[42]  Ersin Y Yazici,et al.  Ferric sulphate leaching of metals from waste printed circuit boards , 2014 .

[43]  Steven De Meester,et al.  Resource Savings by Urban Mining: The Case of Desktop and Laptop Computers in Belgium , 2016 .

[44]  V. S. Rotter,et al.  Assessment of Precious Metal Flows During Preprocessing of Waste Electrical and Electronic Equipment , 2009 .

[45]  David M. Muir,et al.  Thiosulfate leaching of gold—A review , 2001 .

[46]  C. Hagelüken,et al.  Recycling of gold from electronics: Cost-effective use through ‘Design for Recycling’ , 2010 .

[47]  Jie Guo,et al.  PBDEs emission from waste printed wiring boards during thermal process. , 2015, Environmental science & technology.

[48]  M. Aratono,et al.  Gold Recovery by pH-Switching Process via Cloud Point Extraction , 2003 .

[49]  S. Syed,et al.  Recovery of gold from secondary sources—A review , 2012 .

[50]  B. D. Pandey,et al.  Optimizing the thiosulfate leaching of gold from printed circuit boards of discarded mobile phone , 2014 .

[51]  Riitta L. Keiski,et al.  Implementation of Waste Electrical and Electronic Equipment Directive in Finland: Evaluation of the collection network and challenges of the effective WEEE management , 2014 .

[52]  Li Jing-ying,et al.  Thiourea leaching gold and silver from the printed circuit boards of waste mobile phones. , 2012, Waste management.

[53]  Xianping Luo,et al.  Solvent extraction of gold from polysulfide solution , 2006 .

[54]  Annamalai Subramanian,et al.  Environmental contamination and human exposure to dioxin-related compounds in e-waste recycling sites of developing countries. , 2013, Environmental science. Processes & impacts.

[55]  J Brent Hiskey,et al.  Dissolution Chemistry of Gold and Silver in Different Lixiviants , 1988 .

[56]  Yingying Qi,et al.  Leaching of Au, Ag, and Pd from waste printed circuit boards of mobile phone by iodide lixiviant after supercritical water pre-treatment. , 2015, Waste management.

[57]  Wenjuan Lu,et al.  Extraction of gold(III) from hydrochloric acid solutions by CTAB/n-heptane/iso-amyl alcohol/Na2SO3 microemulsion. , 2011, Journal of hazardous materials.

[58]  Eric Williams,et al.  Environmental effects of information and communications technologies , 2011, Nature.

[59]  Zhenming Xu,et al.  Recycling gold and copper from waste printed circuit boards using chlorination process , 2015 .

[60]  Huang Man-hong,et al.  Gold Leaching from Waste Printed Circuit Board by Iodine Process , 2010 .

[61]  T. Urbański,et al.  Gold electrowinning from aqueous-alcoholic thiourea solutions , 2000 .

[62]  Ata Akcil,et al.  Precious metal recovery from waste printed circuit boards using cyanide and non-cyanide lixiviants--A review. , 2015, Waste management.

[63]  Ata Akcil,et al.  Aqueous metal recovery techniques from e-scrap: Hydrometallurgy in recycling , 2012 .

[64]  Reid Lifset,et al.  Dining at the periodic table: metals concentrations as they relate to recycling. , 2007, Environmental science & technology.