Power swing generated in Francis turbines by part load and overload instabilities

Hydropower plays a key role in the actual energy market due to its fast response and regulation capacity. In that way, hydraulic turbines are increasingly demanded to work at off-design conditions, where complex flow patterns and cavitation appear, especially in Francis turbines. The draft tube cavitation surge is a hydraulic phenomenon that appears in Francis turbines below and above its Best Efficiency Point (BEP). It is a low frequency phenomenon consisting of a vortex rope in the runner outlet and draft tube, which can become unstable when its frequency coincides with a natural frequency of the hydraulic circuit. At this situation, the output power can significantly swing, endangering the electrical grid stability. This study is focused on the detection of these instabilities in Francis turbines and their relationship with the output power swings. To do so, extensive experimental tests for different operating conditions have been carried out in a large prototype Francis turbine (444 MW of rated power) within the frame of the European Project Hyperbole (FP7-ENERGY-2013-1). Several sensors have been installed in the hydraulic circuit (pressure sensors in the draft tube, spiral casing, and penstock), in the rotating and static structures (vibration sensors, proximity probes, and strain gauges in the runner and in the shaft), as well as in the electrical side (output power, intensity, and voltage). Moreover, a numerical Finite Element Method (FEM) has been also used to relate the hydraulic excitation with the output power swing.

[1]  Andres Müller,et al.  Analysis of the part load helical vortex rope of a Francis turbine using on-board sensors , 2015 .

[2]  J Koutnik,et al.  Model measurement based identification of Francis turbine vortex rope parameters for prototype part load pressure and power pulsation prediction , 2016 .

[3]  F. Avellan,et al.  Study of the vortex-induced pressure excitation source in a Francis turbine draft tube by particle image velocimetry , 2015 .

[4]  Alexandre Presas,et al.  Numerical study on the influence of acoustic natural frequencies on the dynamic behaviour of submerged and confined disk-like structures , 2017 .

[5]  Alexandre Presas,et al.  On the capability of structural-acoustical FSI simulations to predict natural frequencies of rotating disk-like structures submerged in a heavy fluid , 2016 .

[6]  Chirag Trivedi,et al.  Fluid-structure interactions in Francis turbines : A perspective review , 2017 .

[7]  F Bouloc,et al.  Mechanical risks prediction on Francis runner by Spatial Harmonic Decomposition , 2016 .

[8]  R. P. Saini,et al.  Study of cavitation in hydro turbines—A review , 2010 .

[9]  Andres Müller,et al.  Fluid–structure interaction mechanisms leading to dangerous power swings in Francis turbines at full load , 2017 .

[10]  U Seidel,et al.  Application of fluid-structure coupling to predict the dynamic behavior of turbine components , 2010 .

[11]  Luc Gagnon,et al.  Adding wind energy to hydropower , 2002 .

[12]  Andres Müller,et al.  Dynamics of the precessing vortex rope and its interaction with the system at Francis turbines part load operating conditions , 2017 .

[13]  Alexandre Presas,et al.  Detection and analysis of part load and full load instabilities in a real Francis turbine prototype , 2017 .

[14]  Franco Romerio,et al.  The Future of Hydropower in Europe: Interconnecting Climate, Markets and Policies , 2014 .

[15]  Eduard Egusquiza,et al.  Detection of cavitation in hydraulic turbines , 2006 .