Enhanced cryogenic mechanical properties and liquid oxygen compatibility of DOPO-containing epoxy resin reinforced by epoxy-grafted polysiloxane

[1]  Y. L. Tan,et al.  Ground Response of a Gob-side Entry in a Longwall Panel Extracting 17 m-Thick Coal Seam: A Case Study , 2019, Rock Mechanics and Rock Engineering.

[2]  Jialiang Li,et al.  A novel phosphorus−silicon containing epoxy resin with enhanced thermal stability, flame retardancy and mechanical properties , 2019, Polymer Degradation and Stability.

[3]  B. Fox,et al.  Property enhancement of CFRP composites with different graphene oxide employment methods at a cryogenic temperature , 2019, Composites Part A: Applied Science and Manufacturing.

[4]  Jialiang Li,et al.  Thermal stability and flame retardancy of an epoxy resin modified with phosphoric triamide and glycidyl POSS , 2019, High Performance Polymers.

[5]  Guang-chao Zhang,et al.  Strainburst process of marble in tunnel-excavation-induced stress path considering intermediate principal stress , 2019, Journal of Central South University.

[6]  X. Qian,et al.  Thermal degradation and combustion behavior of flame-retardant epoxy resins with novel phosphorus-based flame retardants and silicon particles , 2018, Polymer Bulletin.

[7]  Zhanjun Wu,et al.  Synthesis and application of a benzoxazine-type phosphorus-containing monomer on epoxy/benzoxazine copolymer: Thermal stability and compatibility with liquid oxygen , 2018, Polymer Degradation and Stability.

[8]  Yuan Hu,et al.  Facile synthesis of a novel hyperbranched poly(urethane-phosphine oxide) as an effective modifier for epoxy resin , 2018, Polymer Degradation and Stability.

[9]  Shuang Yang,et al.  Study on properties of flame-retardant cyanate esters modified with DOPO and triazine compounds , 2018, Polymers for Advanced Technologies.

[10]  Zhanhu Guo,et al.  Reinforced carbon fiber laminates with oriented carbon nanotube epoxy nanocomposites: Magnetic field assisted alignment and cryogenic temperature mechanical properties. , 2018, Journal of colloid and interface science.

[11]  H. Choi,et al.  Improvement of the mode I interlaminar fracture toughness of glass fiber/epoxy composites using polystyrene electrospun nanofibres , 2018, Polymer Bulletin.

[12]  Rongjie Yang,et al.  The characterization of DOPO/MMT nanocompound and its effect on flame retardancy of epoxy resin , 2017 .

[13]  T. Zhao,et al.  Polysiloxane modified phenolic resin with co-continuous structure , 2017 .

[14]  B. Schartel,et al.  Enhanced flame-retardant effect of a montmorillonite/phosphaphenanthrene compound in an epoxy thermoset , 2017 .

[15]  Qiang Liu,et al.  Thermal degradation mechanism and flame retardancy of MQ silicone/ epoxy resin composites , 2016 .

[16]  Rongjie Yang,et al.  High-efficiency flame retardency of epoxy resin composites with perfect T8 caged phosphorus containing polyhedral oligomeric silsesquioxanes (P-POSSs) , 2016 .

[17]  Zhanjun Wu,et al.  Study on liquid oxygen compatibility of bromine-containing epoxy resins for the application in liquid oxygen tank† , 2016 .

[18]  S. Mohanty,et al.  Studies on thermal degradation and flame retardant behavior of the sisal fiber reinforced unsaturated polyester toughened epoxy nanocomposites , 2015 .

[19]  Zhanjun Wu,et al.  Synthesis and liquid oxygen compatibility of a phosphorous‐containing epoxy resin , 2015 .

[20]  J. Chruściel,et al.  Modification of epoxy resins with functional silanes, polysiloxanes, silsesquioxanes, silica and silicates , 2015 .

[21]  Zhanjun Wu,et al.  Liquid oxygen compatible epoxy resin: modification and characterization , 2015 .

[22]  S. Fu,et al.  Enhanced cryogenic interfacial normal bond property between carbon fibers and epoxy matrix by carbon nanotubes , 2014 .

[23]  Rongjie Yang,et al.  Study on the change of silicon and phosphorus content in the condensed phase during the combustion of epoxy resin with OPS/DOPO , 2014 .

[24]  N. Kim,et al.  Synergistic effects of oxidized CNTs and reactive oligomer on the fracture toughness and mechanical properties of epoxy , 2013 .

[25]  S. Fu,et al.  Mechanical properties of cryogenic epoxy adhesives: Effects of mixed curing agent content , 2013 .

[26]  Rongjie Yang,et al.  Study on mechanism of phosphorus–silicon synergistic flame retardancy on epoxy resins , 2012 .

[27]  Chun-Gon Kim,et al.  Effect of CNT functionalization on crack resistance of a carbon/epoxy composite at a cryogenic temperature , 2012 .

[28]  R. Praveen,et al.  Hybridization of carbon–glass epoxy composites: An approach to achieve low coefficient of thermal expansion at cryogenic temperatures , 2011 .

[29]  Xiaodong Li,et al.  The study on compatibility of polymer matrix resins with liquid oxygen , 2006 .

[30]  McDonnell Douglas Aerospace,et al.  COMPOSITE MATERIAL COMPATIBILITY WITH LIQUID OXYGEN , 1997 .