Adhesion of bioinspired nanocomposite microstructure at high temperatures

[1]  T. Thomas,et al.  Thermal analysis of polydimethylsiloxanes. I. Thermal degradation in controlled atmospheres , 1969 .

[2]  D. P. Kirby,et al.  Anisotropic properties of high‐temperature polyimide thin films: Dielectric and thermal‐expansion behaviors , 1992 .

[3]  An Improved Procedure for Determining the Work of Adhesion for Polymer-Solid Contact , 1997 .

[4]  N. Otsuka,et al.  Electrical stability of polyimide siloxane films for interlayer dielectrics in multilevel interconnections , 1999 .

[5]  Massimo Lazzari,et al.  Polydimethylsiloxane thermal degradation Part 1. Kinetic aspects , 2001 .

[6]  G. Camino,et al.  Thermal polydimethylsiloxane degradation. Part 2. The degradation mechanisms , 2002 .

[7]  Ralph Spolenak,et al.  Evidence for capillarity contributions to gecko adhesion from single spatula nanomechanical measurements. , 2005, Proceedings of the National Academy of Sciences of the United States of America.

[8]  S. Gorb,et al.  Biomimetic mushroom-shaped fibrillar adhesive microstructure , 2007, Journal of The Royal Society Interface.

[9]  M. Gonçalves,et al.  Biogenic silica short fibers as alternative reinforcing fillers of silicone rubbers , 2006 .

[10]  Ying Zhang,et al.  Replica molding of high-aspect-ratio polymeric nanopillar arrays with high fidelity. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[11]  Liangti Qu,et al.  Gecko‐Foot‐Mimetic Aligned Single‐Walled Carbon Nanotube Dry Adhesives with Unique Electrical and Thermal Properties , 2007 .

[12]  Kahp Y. Suh,et al.  Stooped Nanohairs: Geometry‐Controllable, Unidirectional, Reversible, and Robust Gecko‐like Dry Adhesive , 2009 .

[13]  G. Sui,et al.  Friction and wear behavior of carbon nanotubes reinforced polyamide 6 composites under dry sliding and water lubricated condition , 2009 .

[14]  K. Suh,et al.  A nontransferring dry adhesive with hierarchical polymer nanohairs , 2009, Proceedings of the National Academy of Sciences.

[15]  Metin Sitti,et al.  Enhanced adhesion by gecko-inspired hierarchical fibrillar adhesives. , 2009, ACS applied materials & interfaces.

[16]  Dezhen Wu,et al.  A facile method for preparing highly conductive and reflective surface-silvered polyimide films , 2009 .

[17]  Eduard Arzt,et al.  Gecko‐Inspired Surfaces: A Path to Strong and Reversible Dry Adhesives , 2010, Advanced materials.

[18]  W. Chien,et al.  High transparent soluble polyimide/silica hybrid optical thin films , 2010 .

[19]  K. Jansen,et al.  Atmospheric Pressure Plasma Surface Modification of Titanium for High Temperature Adhesive Bonding , 2011 .

[20]  I. Rodríguez,et al.  Fabrication and analysis of gecko-inspired hierarchical polymer nanosetae. , 2011, ACS nano.

[21]  Da Li,et al.  Regulation of the elastic modulus of polyurethane microarrays and its influence on gecko-inspired dry adhesion , 2011 .

[22]  Yu Tian,et al.  Design and fabrication of gecko-inspired adhesives. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[23]  M. Mariatti,et al.  Thermal stability and electrical behavior of polydimethylsiloxane nanocomposites with carbon nanotubes and carbon black fillers , 2012 .

[24]  Surface properties of bionic micro-pillar arrays with various shapes of tips , 2012 .

[25]  Ming Zhou,et al.  Controllable interfacial adhesion applied to transfer light and fragile objects by using gecko inspired mushroom-shaped pillar surface. , 2013, ACS applied materials & interfaces.

[26]  Moon Kyu Kwak,et al.  Enhanced Skin Adhesive Patch with Modulus‐Tunable Composite Micropillars , 2013, Advanced healthcare materials.

[27]  Shangtian Yang,et al.  A carbon nanotube filled polydimethylsiloxane hybrid membrane for enhanced butanol recovery , 2014, Scientific Reports.

[28]  S. Haddadi,et al.  Effect of Nanosilica and Boron Carbide on Adhesion Strength of High Temperature Adhesive Based on Phenolic Resin for Graphite Bonding , 2014 .

[29]  Insol Hwang,et al.  Continuous and scalable fabrication of bioinspired dry adhesives via a roll-to-roll process with modulated ultraviolet-curable resin. , 2014, ACS applied materials & interfaces.

[30]  Insol Hwang,et al.  Bio-inspired adhesive systems for next-generation green manufacturing , 2014 .

[31]  M. C. Tracey,et al.  Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering , 2014 .

[32]  Shu Yang,et al.  Bio-inspired responsive polymer pillar arrays , 2015 .

[33]  Kwang Su Kim,et al.  Highly durable and unidirectionally stooped polymeric nanohairs for gecko-like dry adhesive , 2015, Nanotechnology.

[34]  A. Wu,et al.  Bonding and high-temperature reliability of NiFeMo alloy/n-type PbTe joints for thermoelectric module applications , 2015, Journal of Materials Science.

[35]  L. F. Silva,et al.  Testing and simulation of mixed adhesive joints for aerospace applications , 2015 .

[36]  Lei Jiang,et al.  Nanofibrous adhesion: the twin of gecko adhesion. , 2015, ACS nano.

[37]  Fabrication of micro/nano hierarchical structures with analysis on the surface mechanics , 2016 .

[38]  Metin Sitti,et al.  Phase Change of Gallium Enables Highly Reversible and Switchable Adhesion , 2016, Advanced materials.

[39]  A. H. Korayem,et al.  Failure of CFRP-to-steel double strap joint bonded using carbon nanotubes modified epoxy adhesive at moderately elevated temperatures , 2016 .

[40]  Minsu Kang,et al.  Simple and Reliable Fabrication of Bioinspired Mushroom-Shaped Micropillars with Precisely Controlled Tip Geometries. , 2016, ACS applied materials & interfaces.

[41]  Xiaowen Yuan,et al.  Carbon fibre/graphene foam/polymer composites with enhanced mechanical and thermal properties , 2016 .

[42]  P. Dubois,et al.  Multiscale benzoxazine composites: The role of pristine CNTs as efficient reinforcing agents for high-performance applications , 2017 .

[43]  Xin Wang,et al.  A facile approach towards large-scale synthesis of hierarchically nanoporous SnO2@Fe2O3 0D/1D hybrid and its effect on flammability, thermal stability and mechanical property of flexible poly(vinyl chloride) , 2017 .

[44]  Tao-Chih Chang,et al.  Development of Cu-Ag pastes for high temperature sustainable bonding , 2017 .