Impact behaviour of omega stiffened composite panels

Abstract The mechanical response of reinforced composite structures under impact loads is particularly challenging owing to the rising of multiple and simultaneous failure phenomena. Indeed, low velocity impacts may produce intra-laminar damages, like fibre breakage and matrix cracking, and inter-laminar damages, such as delaminations and skin-stringer debonding. As already remarked, these failure phenomena often take place simultaneously, leading to a significant reduction in strength and stability of the composite components. In this paper, the behaviour of stiffened composite panels, with omega shaped stringers, under low velocity impacts is numerically investigated by means of non-linear explicit FEM analyses. Different impact energy levels are considered and correlation with experimental data is provided, in terms of impact force, displacement and energy. A sensitivity analysis has been performed to investigate the influence of numerical models’ approximations on the accuracy of the obtained numerical results. Models with an increasing level of damage simulation details have been adopted to study the effects of combined and separated intra-laminar and inter-laminar failures providing an interesting insight on the modelling requirements for an accurate simulation of the investigated phenomena.

[1]  Brian Falzon,et al.  Delamination threshold load for dynamic impact on plates , 2006 .

[2]  J. G. Williams,et al.  Corrections for mode II fracture toughness specimens of composites materials , 1992 .

[3]  Christophe Bouvet,et al.  Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure , 2013 .

[4]  Lorenzo Iannucci,et al.  Progressive failure modelling of woven carbon composite under impact , 2006 .

[5]  Francesco Caputo,et al.  Modelling the simulation of impact induced damage onset and evolution in composites , 2014 .

[6]  Ning Hu,et al.  Low-velocity impact-induced damage of continuous fiber-reinforced composite laminates. Part I. An FEM numerical model , 2002 .

[7]  Hiroshi Suemasu,et al.  Damage propagation in CFRP laminates subjected to low velocity impact and static indentation , 2007 .

[8]  Pedro P. Camanho,et al.  A continuum damage model for composite laminates: Part I - Constitutive model , 2007 .

[9]  René de Borst,et al.  Mesh-independent discrete numerical representations of cohesive-zone models , 2006 .

[10]  Aniello Riccio,et al.  A Study on Skin Delaminations Growth in Stiffened Composite Panels by a Novel Numerical Approach , 2013, Applied Composite Materials.

[11]  Aniello Riccio,et al.  Delamination buckling and growth phenomena in stiffened composite panels under compression. Part I: An experimental study , 2014 .

[12]  Aniello Riccio,et al.  Modeling Damage Propagation in Composite Plates with Embedded Delamination under Compressive Load , 2008 .

[13]  Dirk Vandepitte,et al.  Failure analysis of low velocity impact on thin composite laminates : Experimental and numerical approaches , 2008 .

[14]  Pedro P. Camanho,et al.  Simulation of drop-weight impact and compression after impact tests on composite laminates , 2012 .

[15]  Aniello Riccio,et al.  Skin Stringer Debonding Evolution in Stiffened Composite Panels under Compressive Load: A Novel Numerical Approach , 2013 .

[16]  P.P. Camanho,et al.  A Three-dimensional Damage Model for Transversely Isotropic Composite Laminates , 2008 .

[17]  Venkata M. K. Akula,et al.  Review of Degradation Models for Progressive Failure Analysis of Fiber Reinforced Polymer Composites , 2009 .

[18]  A. Riccio,et al.  Stacking Sequence Effects on Fatigue Intra-laminar Damage Progression in Composite Joints , 2013, Applied Composite Materials.

[19]  U. Mercurio,et al.  Numerical Simulations of Inter-laminar Damage Evolution in a Composite Wing Box , 2014, Applied Composite Materials.

[20]  Christophe Bouvet,et al.  Low velocity impact modeling in composite laminates capturing permanent indentation , 2012 .

[21]  Zafer Gürdal,et al.  LOW-VELOCITY IMPACT DAMAGE ON DISPERSED STACKING SEQUENCE LAMINATES. PART I: EXPERIMENTS , 2009 .

[22]  Murray L. Scott,et al.  Review of delamination predictive methods for low speed impact of composite laminates , 2004 .

[23]  Aniello Riccio,et al.  Formulation and assessment of an enhanced finite element procedure for the analysis of delamination growth phenomena in composite structures , 2011 .

[24]  Christophe Bouvet,et al.  Low velocity impact modelling in laminate composite panels with discrete interface elements , 2009 .

[25]  P. Camanho,et al.  Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials , 2003 .

[26]  Pierluigi Perugini,et al.  Influence of contact phenomena on embedded delaminations growth in composites , 2003 .

[27]  Christophe Bouvet,et al.  Discrete Impact Modeling of Inter- and Intra-laminar Failure in Composites , 2013 .

[28]  Paolo Feraboli,et al.  A new composite structure impact performance assessment program , 2005 .

[29]  G. Felice,et al.  Stacking Sequence Effects on Damage Onset in Composite Laminate Subjected to Low Velocity Impact , 2014 .

[30]  Aniello Riccio,et al.  Finite Element Analysis of the Stability (Buckling and Post-Buckling) of Composite Laminated Structures: Well Established Procedures and Challenges , 2012, Applied Composite Materials.

[31]  H. Suemasu.  An experimental method to measure the mode-III interlaminar fracture toughness of composite laminates , 1999 .

[32]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[33]  Brian Falzon,et al.  A progressive failure model for composite laminates subjected to low velocity impact damage , 2008 .

[34]  Serge Abrate,et al.  Modeling of impacts on composite structures , 2001 .

[35]  Bulent Murat Icten,et al.  An experimental investigation of the impact response of composite laminates , 2009 .

[36]  Ik-Hyeon Choi,et al.  Low-velocity impact analysis of composite laminates under initial in-plane load , 2008 .

[37]  Michael R Wisnom,et al.  Modelling discrete failures in composites with interface elements , 2010 .

[38]  Francesco Aymerich,et al.  Simulation of multiple delaminations in impacted cross-ply laminates using a finite element model based on cohesive interface elements , 2009 .

[39]  Robin Olsson,et al.  Analytical prediction of large mass impact damage in composite laminates , 2001 .

[40]  Francesco Caputo,et al.  Numerical Procedures for Damage Mechanisms Analysis in CFRP Composites , 2013 .

[41]  A. Amaro,et al.  Delamination Depth in Composites Laminates With Interface Elements and Ultrasound Analysis , 2011 .

[42]  Paul Straznicky,et al.  Effects of stacking sequence on the impact resistance in composite laminates — Part 1: parametric study , 1998 .

[43]  Francesco Aymerich,et al.  Prediction of impact-induced delamination in cross-ply composite laminates using cohesive interface elements , 2008 .

[44]  Tong Earn Tay,et al.  Characterization and analysis of delamination fracture in composites: An overview of developments from 1990 to 2001 , 2003 .