Coupled TRNSYS-CFD simulations evaluating the performance of PCM plate heat exchangers in an airport terminal building displacement conditioning system

This paper reports on the energy performance evaluation of a displacement ventilation (DV) system in an airport departure hall, with a conventional DV diffuser and a diffuser retrofitted with a phase change material storage heat exchanger (PCM-HX). A TRNSYS-CFD quasi-dynamic coupled simulation method was employed for the analysis, whereby TRNSYS® simulates the HVAC and PID control system and ANSYS FLUENT® is used to simulate the airflow inside the airport terminal space. The PCM-HX is also simulated in CFD, and is integrated into the overall model as a secondary coupled component in the TRNSYS interface. Different night charging strategies of the PCM-HX were investigated and compared with the conventional DV diffuser. The results show that: i) the displacement ventilation system is more efficient for cooling than heating a space; ii) the addition of a PCM-HX system reduces the heating energy requirements during the intermediate and summer periods for specific night charging strategies, whereas winter heating energy remains unaffected; iii) the PCM-HX reduces cooling energy requirements, and; iv) maximum energy savings of 34% are possible with the deployment of PCM-HX retrofitted DV diffuser.

[1]  Bahram Moshfegh,et al.  Numerical predictions of indoor climate in large industrial premises. A comparison between different k–ε models supported by field measurements , 2007 .

[2]  Zhiqiang John Zhai,et al.  Performance of coupled building energy and CFD simulations , 2005 .

[3]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[4]  Savvas A. Tassou,et al.  Effectiveness of CFD simulation for the performance prediction of phase change building boards in the thermal environment control of indoor spaces , 2013 .

[5]  Paul-Louis George,et al.  3D transient fixed point mesh adaptation for time-dependent problems: Application to CFD simulations , 2007, J. Comput. Phys..

[6]  Salmaan Craig,et al.  Tests of prototype PCM ‘sails’ for office cooling , 2011 .

[7]  Christopher J. Roy,et al.  Comprehensive code verification techniques for finite volume CFD codes , 2012 .

[8]  Diego A. Arias.  ADVANCES ON THE COUPLING BETWEEN A COMMERCIAL CFD PACKAGE AND A COMPONENT-BASED SIMULATION PROGRAM , 2006 .

[9]  Jose M. Marin,et al.  Characterization of melting and solidification in a real scale PCM-air heat exchanger: Numerical model and experimental validation , 2011 .

[10]  L. Cabeza,et al.  Free-cooling of buildings with phase change materials , 2004 .

[11]  V. Voller,et al.  ERAL SOURCE-BASED METHOD FOR SOLIDIFICATION PHASE CHANGE , 1991 .

[12]  P. O. Fanger,et al.  Thermal comfort: analysis and applications in environmental engineering, , 1972 .

[13]  P. Simmonds,et al.  Using a Constant Volume Displacement Ventilation System to Create a Micro Climate in a Large Airport Terminal in Bangkok , 1996 .

[14]  Standard Ashrae.  Thermal Environmental Conditions for Human Occupancy , 1992 .

[15]  Bert Blocken,et al.  CFD simulation of near-field pollutant dispersion on a high-resolution grid : a case study by LES and RANS for a building group in downtown Montreal , 2011 .

[16]  Howard D. Goodfellow,et al.  Industrial Ventilation Design Guidebook , 2001 .

[17]  Kifle G. Gebremedhin,et al.  Characterization of flow field in a ventilated space and simulation of heat exchange between cows and their environment , 2003 .

[18]  Kimiya Komurasaki,et al.  Performance of arcjet-type atomic-oxygen generator by laser absorption spectroscopy and CFD analysis , 2004 .

[19]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in buildings and the effect of adding awnings , 2012 .

[20]  Ali Bolatturk,et al.  Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey , 2008 .

[21]  Dirk Saelens,et al.  Numerical sensitivity study of transient surface convection during night cooling , 2012 .

[22]  Jon Hand,et al.  CONTRASTING THE CAPABILITIES OF BUILDING ENERGY PERFORMANCE SIMULATION PROGRAMS , 2008 .

[23]  Shafqat Hussain,et al.  Evaluation of various turbulence models for the prediction of the airflow and temperature distributions in atria , 2012 .

[24]  Hazim B. Awbi,et al.  Energy efficient room air distribution , 1998 .

[25]  Zhiqiang John Zhai,et al.  Evaluation of Various Turbulence Models in Predicting Airflow and Turbulence in Enclosed Environments by CFD: Part 2—Comparison with Experimental Data from Literature , 2007 .

[26]  Maria Kolokotroni,et al.  A validated methodology for the prediction of heating and cooling energy demand for buildings within the Urban Heat Island: Case-study of London , 2010 .

[27]  Xiangyang Rong,et al.  RESEARCH ON INDOOR ENVIRONMENT FOR THE TERMINAL 1 OF CHENGDU SHUANGLIU INTERNATIONAL AIRPORT , 2009 .

[28]  I. Idelchik.  Handbook of Hydraulic Resistance, 2nd Edition , 1987 .

[29]  S. Holst,et al.  Using radiant cooled floors to condition large spaces and maintain comfort conditions , 2000 .

[30]  K. Terpager Andersen.  Atrium models for the analysis of thermal comfort and energy use , 1996 .

[31]  Zhao Zhang,et al.  Evaluation of Various Turbulence Models in Predicting Airflow and 1 Turbulence in Enclosed Environments by CFD : Part-1 : 2 Summary of Prevalent Turbulence Models 3 4 , 2007 .

[32]  Kazuhide Ito,et al.  Energy consumption analysis intended for real office space with energy recovery ventilator by integrating BES and CFD approaches , 2012 .

[33]  Nasrudin Abd Rahim,et al.  Review of PCM based cooling technologies for buildings , 2012 .

[34]  Li Shao,et al.  USING BUILDING SIMULATION TO EVALUATE LOW CARBON REFURBISHMENT OPTIONS FOR AIRPORT BUILDINGS , 2011 .

[35]  Martin Belusko,et al.  Designing a PCM storage system using the effectiveness-number of transfer units method in low energy cooling of buildings , 2012 .

[36]  Bje Bert Blocken,et al.  CFD simulation of cross-ventilation for a generic isolated building : impact of computational parameters , 2012 .

[37]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[38]  Zhu Neng,et al.  Experimental study and evaluation of latent heat storage in phase change materials wallboards , 2007 .

[39]  Maxime Tye-Gingras,et al.  Comfort and energy consumption of hydronic heating radiant ceilings and walls based on CFD analysis , 2012 .

[40]  Sašo Medved,et al.  Efficiency of free cooling using latent heat storage integrated into the ventilation system of a low energy building , 2007 .