We propose a fiber-based 4-LP mode (LP01, LP11, LP21 and LP02) multi/demultiplexer, which excites or separates 4-LP mode simultaneously in the integrated structure of a single optical fiber. The structure contains a 4-mode transmitting core in the center of the fiber and the other three multi/demulitplexing parts (consist of a coupling core and several assistant cores or not) which are deployed around the transmitting core with 120 degrees between each other. The design of the fiber-based 4-LP mode multi/demultiplexer includes the following parts. Firstly, the appropriate distance between the transmitting core and the surrounding parts are below 15μm, 12μm and 10μm for multi/demultiplexing of LP11, LP21 and LP02 mode, respectively, which can guarantee the coupling loss is less than 2%. Then we design the structural parameters (core diameter and refractive index) of single-mode coupling cores to achieve phase matching between LP01 (single-mode coupling cores) and LP11, LP21, LP02 (transmitting core), respectively. The appropriate core diameter and refractive index for the coupling cores of the multi/demultiplexing parts are 5μm and 1.465703 (LP01-LP11), 2μm and 1.479793 (LP01-LP21), 1.5μm and 1.488404 (LP01-LP02), respectively, all of which can ensure that the coupling efficiency are more than 90% in the C+L band. Afterwards, by discussing the coupling crosstalk of each multi/demultiplexing part, we find that LP02-LP01 mode multi/demultiplexing part does not need any assistant core, LP21-LP01 and LP11-LP01 mode multi/multiplexing parts need to add 1 or 2 assistant single mode core as required to decrease the coupling crosstalk. Finally by adjusting the relative position of the three multi/demultiplexing parts and the transmitting core (ensure the performance of the whole system is not affected), we can ensure that the 4 mode can be multi/demultiplexed at the same time. Above all, we put forward a fiber-based 4-LP-mode multi/demultiplexer which excites or separates 4-LP mode simultaneously with high multi/demultiplexing efficiency, low coupling loss, and low coupling crosstalk.
[1]
Hidenori Taga,et al.
Mode multiplexer for multimode transmission in multimode fibers.
,
2011,
Optics express.
[2]
Ming-Yang Chen,et al.
Design of add-drop multiplexer based on multi-core optical fibers for mode-division multiplexing.
,
2014,
Optics express.
[3]
M. Koshiba,et al.
Design and analysis of large-effective-area heterogeneous trench-assisted multi-core fiber.
,
2012,
Optics express.
[4]
Shoichiro Matsuo,et al.
Multicore fiber-based mode multiplexer/demultiplexer
,
2015,
Photonics West - Optoelectronic Materials and Devices.
[5]
J. Bland-Hawthorn,et al.
Multi-mode to single-mode conversion in a 61 port Photonic Lantern.
,
2010,
Optics express.
[6]
Roland Ryf,et al.
6×56-Gb/s mode-division multiplexed transmission over 33-km few-mode fiber enabled by 6×6 MIMO equalization.
,
2011,
Optics express.
[7]
L. Nelson,et al.
Space-division multiplexing in optical fibres
,
2013,
Nature Photonics.
[8]
Keping Long,et al.
Design and optimization of 3-mode×12-core dual-ring structured few-mode multi-core fiber
,
2016
.
[9]
Kunimasa Saitoh,et al.
A design method of a fiber-based mode multi/demultiplexer for mode-division multiplexing.
,
2010,
Optics express.