BIPV-Powered Smart Windows Utilizing Photovoltaic and Electrochromic Devices

A BIPV-powered smart window comprising a building-integrated photovoltaic (BIPV) panel and an all-solid-state electrochromic (EC) stack is proposed. In the proposed device, the output voltage of the BIPV panel varies in accordance with the intensity of the incident light and is modulated in such a way as to generate the EC stack voltage required to maintain the indoor illuminance within a specified range. Two different EC stacks are fabricated and characterized, namely one stack comprising ITO/WO3/Ta2O5/ITO and one stack comprising ITO/WO3/lithium-polymer electrolyte/ITO. It is shown that of the two stacks, the ITO/WO3/lithium-polymer electrolyte/ITO stack has a larger absorptance (i.e., approximately 99% at a driving voltage of 3.5 V). The experimental results show that the smart window incorporating an ITO/WO3/lithium-polymer electrolyte/ITO stack with an electrolyte thickness of 1.0 μm provides an indoor illuminance range of 750–1,500 Lux under typical summertime conditions in Taiwan.

[1]  Y. Sung,et al.  The improving electrochromic performance of nickel oxide film using aqueous N,N-dimethylaminoethanol solution , 2012 .

[2]  Robert Clear,et al.  Advancement of Electrochromic Windows , 2006 .

[3]  B. Scrosati,et al.  Characterization of Nonstoichiometric Nickel Oxide Thin‐Film Electrodes , 1994 .

[4]  Claes-Göran Granqvist,et al.  Electrochromic tungsten oxide films: Review of progress 1993–1998 , 2000 .

[5]  Chia-Yen Lee,et al.  Optimal sun-shading design for enhanced daylight illumination of subtropical classrooms , 2008 .

[6]  Hui Huang,et al.  Photoelectrochromic properties of NiO film deposited on an N-doped TiO2 photocatalytical layer , 2009 .

[7]  J. Lamarre,et al.  Electrochromic interference filters fabricated from dense and porous tungsten oxide films , 2011 .

[8]  M. Jayachandran,et al.  Investigation of x-ray photoelectron spectroscopic (XPS), cyclic voltammetric analyses of WO3 films and their electrochromic response in FTO/WO3/electrolyte/FTO cells , 2006 .

[9]  Si-Kyung Choi,et al.  Effect of the deposition geometry on the electrical properties within Tin-doped indium oxide film deposited under a given RF magnetron sputtering condition , 2001 .

[10]  Anders Hjelm,et al.  Recent Advances in Electrochromics for Smart Windows Applications , 1998, Optical Interference Coatings.

[11]  P. Yianoulis,et al.  Development of photoelectrochromic devices for dynamic solar control in buildings , 2010 .

[12]  David K. Benson,et al.  Optimization Study of Solid‐State Electrochromic Devices Based on WO 3 / Lithium ‐ Polymer Electrolyte / V 2 O 5 Structures , 1994 .

[13]  K. Ho,et al.  Tungsten Oxide‐Prussian Blue Electrochromic System Based on a Proton‐Conducting Polymer Electrolyte , 1994 .

[14]  P. Yianoulis,et al.  “Partly covered” photoelectrochromic devices with enhanced coloration speed and efficiency , 2012 .

[15]  N. Ozer.  Optical and electrochemical characteristics of sol-gel deposited tungsten oxide films: a comparison , 1997 .

[16]  C. Lampert.  Smart switchable glazing for solar energy and daylight control , 1998 .

[17]  David K. Benson,et al.  Optimization Study of Solid‐State Electrochromic Devices Based on WO3/ Lithium‐Polymer Electrolyte/V2O5 Structures. , 1995 .

[18]  Giuseppe Chidichimo,et al.  Fast, self-supplied, all-solid photoelectrochromic film , 2010 .

[19]  A Maccari,et al.  Design, production and characterisation of an all solid state electrochromic medium size device , 1998 .

[20]  L. Toppare,et al.  Optoelectrochemical properties of poly(5,12-dihydrothieno[3′,4′:2,3][1,4] dioxocino[6,7-b]quinoxaline-co-2,2′ bithiophene) and its electrochromic device application , 2007 .

[21]  X. Tao,et al.  Photoelectrochromic properties and energy storage of TiO2−xNx/NiO bilayer thin films , 2010 .

[22]  Wei-Ting Wu,et al.  Fast-switching photovoltachromic cells with tunable transmittance. , 2009, ACS nano.

[23]  Chia-Yen Lee,et al.  A MEMS-based Benzene Gas Sensor with a Self-heating WO3 Sensing Layer , 2009, Sensors.

[24]  H. Sakaguchi,et al.  Nanometer scale-electrochromic modification of NiO films using a novel technique of scanning near-field optical microscopy , 2003 .

[25]  A. Akl,et al.  Influence of proton insertion on the conductivity, structural and optical properties of amorphous and crystalline electrochromic WO3 films , 2004 .

[26]  J. Tu,et al.  Enhanced electrochromic performance of macroporous WO3 films formed by anodic oxidation of DC-sputtered tungsten layers , 2010 .

[27]  P. Patil,et al.  Structural, morphological, optical and electrochromic properties of Ti-doped MoO3 thin films , 2009 .

[28]  Ewa Rysiakiewicz-Pasek,et al.  WO3-based electrochromic system with hybrid organic–inorganic gel electrolytes , 2008 .