Numerical investigations on thermal performance of a micro-cylindrical combustor with gradually reduced wall thickness

Abstract Micro combustor is the key component of the micro-thermophotovoltaic (MTPV) system. A high and uniform wall temperature distribution on the micro combustor is helpful for obtaining higher energy conversion efficiency. In this work, a micro-cylindrical combustor with gradually reduced wall thickness is developed. The micro-cylindrical combustors with gradually reduced wall thickness are widely investigated and compared with the micro-cylindrical combustors with a step under various conditions. Results suggest that the micro-cylindrical combustors with gradually reduced wall thickness has a higher and more uniform wall temperature distribution under various H2/air equivalence ratios, H2 mass flow rates and inlet/outlet diameter ratios compared with that of the micro-cylindrical combustors with a step. However, it should be noted that effects of solid material on the outer wall temperature of the two micro-cylindrical combustors are interesting. The thermal performance of micro-cylindrical combustor with gradually reduced wall thickness is better under the solid material of quartz whose thermal conductivity is low, while the positive effects brought by the micro-cylindrical combustor with gradually reduced wall thickness disappear under the solid material of silicon carbide whose thermal conductivity is high.

[1]  Wenming Yang,et al.  Numerical investigation of the effect of distributed heat sources on heat-to-sound conversion in a T-shaped thermoacoustic system , 2015 .

[2]  A. Gupta,et al.  Flame dynamics of a meso-scale heat recirculating combustor , 2010 .

[3]  Wenming Yang,et al.  Development of a high-temperature and high-uniformity micro planar combustor for thermophotovoltaics application , 2015 .

[4]  Wenming Yang,et al.  Development of micro-thermophotovoltaic power generator with heat recuperation , 2014 .

[5]  A. Gupta,et al.  Combustion and heat transfer at meso-scale with thermal recuperation , 2010 .

[6]  Yang Wenming,et al.  Combustion process and entropy generation in a novel microcombustor with a block insert , 2015 .

[7]  E Jiaqiang,et al.  Numerical investigations on an improved micro-cylindrical combustor with rectangular rib for enhancing heat transfer , 2016 .

[8]  Dan Zhao,et al.  Effect of choked outlet on transient energy growth analysis of a thermoacoustic system , 2015 .

[9]  Yu-Ting Wu,et al.  Combustion characteristics of a micro segment platinum tubular reactor with a gap , 2016 .

[10]  A. Fan,et al.  Effect of bluff body shape on the blow-off limit of hydrogen/air flame in a planar micro-combustor , 2014 .

[11]  A. Gupta,et al.  Combustion of propane with Pt and Rh catalysts in a meso-scale heat recirculating combustor , 2014 .

[12]  Yang Su,et al.  Numerical study on a multiple-channel micro combustor for a micro-thermophotovoltaic system , 2016 .

[13]  E Jiaqiang,et al.  Field synergy analysis of the micro-cylindrical combustor with a step , 2016 .

[14]  Wenming Yang,et al.  Entropy generation analysis of H2/air premixed flame in micro-combustors with heat recuperation , 2013 .

[15]  Wenming Yang,et al.  Development of micro power generators – A review , 2011 .

[16]  W. Liu,et al.  Interactions between heat transfer, flow field and flame stabilization in a micro-combustor with a bluff body , 2013 .

[17]  K. Maruta.  Micro and mesoscale combustion , 2011 .

[18]  Wenming Yang,et al.  Numerical study of premixed hydrogen/air combustion in a micro planar combustor with parallel separating plates , 2015 .

[19]  Wenming Yang,et al.  Combustion characteristics and performance evaluation of premixed methane/air with hydrogen addition in a micro-planar combustor , 2015 .

[20]  Niket S. Kaisare,et al.  A review on microcombustion: Fundamentals, devices and applications , 2012 .

[21]  D. G. Norton,et al.  A CFD study of propane/air microflame stability , 2004 .

[22]  A. Gupta,et al.  Performance of synthetic jet fuels in a meso-scale heat recirculating combustor , 2014 .

[23]  Dan Zhao,et al.  Entropy-involved energy measure study of intrinsic thermoacoustic oscillations , 2016 .

[24]  V. Vijayan,et al.  Thermal performance of a meso-scale liquid-fuel combustor , 2011 .

[25]  Mohamed Sultan Mohamed Ali,et al.  Micro-scale energy harvesting devices: Review of methodological performances in the last decade , 2016 .

[26]  Paul D. Ronney,et al.  Numerical modeling of non-adiabatic heat-recirculating combustors , 2007 .

[27]  A. Fan,et al.  Experimental and numerical investigation on combustion characteristics of premixed hydrogen/air flame in a micro-combustor with a bluff body , 2012 .

[28]  A. Fan,et al.  Effect of pressure on the blow-off limits of premixed CH4/air flames in a mesoscale cavity-combustor , 2015 .

[29]  Xiao Jin,et al.  Performance evaluation of 3D printed miniature electromagnetic energy harvesters driven by air flow , 2016 .

[30]  K. Mazaheri,et al.  Combustion characteristics and flame bifurcation in repetitive extinction-ignition dynamics for premixed hydrogen-air combustion in a heated micro channel , 2016 .

[31]  Zhaoli Guo,et al.  Fundamental flame characteristics of premixed H2–air combustion in a planar porous micro-combustor , 2016 .

[32]  Jun Li,et al.  Experimental study on standing wave regimes of premixed H2–air combustion in planar micro-combustors partially filled with porous medium , 2016 .

[33]  A. Gupta,et al.  Extinction, discharge, and thrust characteristics of methanol fueled meso-scale thrust chamber , 2013 .

[34]  E Jiaqiang,et al.  Effects of inlet pressure on wall temperature and exergy efficiency of the micro-cylindrical combustor with a step , 2016 .

[35]  A. Fan,et al.  Effect of the length of a plate flame holder on flame blowout limit in a micro-combustor with preheating channels , 2016 .

[36]  K. Maruta,et al.  Microscale combustion: Technology development and fundamental research , 2011 .

[37]  Wenming Yang,et al.  Porous media combustion for micro thermophotovoltaic system applications , 2010 .

[38]  Ashwani K. Gupta,et al.  Performance characteristics of methanol and kerosene fuelled meso-scale heat-recirculating combustors , 2011 .

[39]  A. Fan,et al.  Experimental investigation and numerical analysis on flame stabilization of CH4/air mixture in a mesoscale channel with wall cavities , 2015 .

[40]  Wenming Yang,et al.  Research on modular micro combustor-radiator with and without porous media , 2011 .

[41]  Dan Zhao,et al.  Mitigation of premixed flame-sustained thermoacoustic oscillations using an electrical heater , 2015 .

[42]  Zhongqing Yang,et al.  Numerical study of effect of wall parameters on catalytic combustion characteristics of CH4/air in a heat recirculation micro-combustor , 2016 .

[43]  Jun Li,et al.  Dynamic behaviors of premixed hydrogen–air flames in a planar micro-combustor filled with porous medium , 2015 .

[44]  Xiaohuan Zhao,et al.  Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor , 2016 .

[45]  Ashwani K. Gupta,et al.  A review of progress in heat recirculating meso-scale combustors , 2011 .

[46]  Wenming Yang,et al.  Thermal performance of micro-combustors with baffles for thermophotovoltaic system , 2013 .

[47]  T. Shamim,et al.  A three-dimensional computational model of H2–air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application , 2015 .

[48]  A. Fan,et al.  Bifurcations and negative propagation speeds of methane/air premixed flames with repetitive extinc , 2012 .

[49]  Bo Feng,et al.  The development of a micropower (micro-thermophotovoltaic) device , 2007 .

[50]  Dan Zhao,et al.  Thermodynamic measurement and analysis of dual-temperature thermoacoustic oscillations for energy harvesting application , 2014 .

[51]  T. Park,et al.  A Numerical Study for Heat Transfer Characteristics of a Micro Combustor by Large Eddy Simulation , 2009 .

[52]  Wenming Yang,et al.  Entropy generation analysis of fuel lean premixed CO/H2/air flames , 2015 .

[53]  K. Mazaheri,et al.  Studying the repetitive extinction-ignition dynamics for lean premixed hydrogen-air combustion in a heated microchannel , 2014 .

[54]  E Jiaqiang,et al.  Numerical investigation on the combustion characteristics of non-premixed hydrogen-air in a novel micro-combustor , 2017 .

[55]  Wenming Yang,et al.  Experimental and numerical study of the wall temperature of cylindrical micro combustors , 2008 .

[56]  Wei Zuo,et al.  Orthogonal Experimental Design and Fuzzy Grey Relational Analysis for emitter efficiency of the micro-cylindrical combustor with a step , 2016 .

[57]  A. Fan,et al.  Flame-anchoring mechanisms of a micro cavity-combustor for premixed H2/air flame , 2015 .

[58]  A. Gupta,et al.  Rh assisted catalytic oxidation of jet fuel surrogates in a meso-scale combustor , 2015 .

[59]  Song Hu,et al.  Hetero-/homogeneous combustion of premixed hydrogen–oxygen mixture in a micro-reactor with catalyst segmentation , 2016 .