FLUID VISCOUS DAMPER-BASED SEISMIC RETROFIT STRATEGIES OF STEEL STRUCTURES: GENERAL CONCEPTS AND DESIGN APPLICATIONS

Two advanced seismic protection technologies, represented by a dissipative bracing system and a damped cable system, both incorporating fluid viscous dampers as passive control devices, are examined with special reference to their use in retrofitting steel structures. The essential characteristics and performance of the dampers and the two technologies, along with their analytical and computational modelling criteria, are recalled in the first part of this paper. A demonstrative design study concerning the application of both systems to an Italian pre-normative steel school building is then presented, by discussing the mechanical parameters, dimensions, layouts and locations selected for the relevant constituting elements. The advantages of the two rehabilitation hypotheses are assessed in terms of the mutual performance objectives formulated at a preliminary design stage, based on the results of the modal and non-linear dynamic analyses carried out during the final verification phase. Structural implementation and technical installation details are finally provided for both retrofit solutions.

[1]  David A. Nethercot,et al.  Rotational stiffness characteristics of steel beam-to-column connections , 1987 .

[2]  Georges Magonette,et al.  Seismic tests on reinforced concrete and steel frames retrofitted with dissipative braces , 2004 .

[3]  Stefano Sorace,et al.  Non-linear dynamic modelling and design procedure of FV spring- dampers for base isolation , 2001 .

[4]  T. T. Soong,et al.  Supplemental energy dissipation: state-of-the-art and state-of-the- practice , 2002 .

[5]  Stefano Sorace,et al.  Non-linear dynamic design procedure of FV spring-dampers for base isolation — frame building applications , 2001 .

[6]  Stefano Sorace,et al.  Iterative design procedure of fluid viscous devices included in braced frames , 1999 .

[7]  Michael C. Constantinou,et al.  EXPERIMENTAL AND ANALYTICAL INVESTIGATION OF SEISMIC RETROFIT OF STRUCTURES WITH SUPPLEMENTAL DAMPING: PART 1 - FLUID VISCOUS DAMPING DEVICES , 1995 .

[8]  Georges Magonette,et al.  Experimental investigation on a base isolation system incorporating steel–Teflon sliders and pressurized fluid viscous spring dampers , 2008 .

[9]  Gloria Terenzi,et al.  Dynamics of SDOF Systems with Nonlinear Viscous Damping , 1999 .

[10]  Stefano Sorace,et al.  Verification of damped cable system performance in the seismic rehabilitation of buildings , 2003 .

[11]  Stuart S. Chen,et al.  Balancing Lateral Loads Using Tendon-Based Supplemental Damping System , 2000 .

[12]  Stefano Sorace,et al.  Seismic Protection of Frame Structures by Fluid Viscous Damped Braces , 2008 .

[13]  T. T. Soong,et al.  Passive Energy Dissipation Systems for Structural Design and Retrofit , 1998 .

[14]  Robert D. Hanson,et al.  Seismic design with supplemental energy dissipation devices , 2001 .

[15]  Stuart S. Chen,et al.  The Seismic Response of a 1:3 Scale Model R.C. Structure with Elastomeric Spring Dampers , 1995 .