A review on remanufacturing assembly management and technology

Remanufacturing has been regarded as a key technology for the sustainable development of the world economy. However, the quality of remanufactured products is difficult to meet the needs of customers, which has become a bottleneck restricting the development of remanufacturing industry. Therefore, remanufacturing assembly management and technology has more important engineering significance to improve production efficiency and quality of remanufactured products. Aiming at the lag of the research on management and control of remanufacturing assembly, this paper summarizes the research status of remanufacturing assembly on the basis of studying the characteristics and connotation of remanufacturing assembly system. Intelligent robot of remanufacturing assembly driven by large data and intelligent manufacturing will become an important development direction in the future. The research direction of remanufacturing assembly is summarized, and the future research trend of remanufacturing assembly is pointed out. It can be predicted that the intelligent robot of remanufacturing assembly will be the key to the flexibility, intellectualization, precision, and integration of remanufacturing assembly system in the future. This study provides a direction for the development of remanufacturing industry.

[1]  Conghu Liu,et al.  Research on data mining technology for the connotation and measurement of uncertainty for reassembly dimensions , 2018, Int. J. High Perform. Syst. Archit..

[2]  Yuan Zhang,et al.  The online quality control method for reassembly based on state space model , 2016 .

[3]  Duc Truong Pham,et al.  Robotic disassembly sequence planning using enhanced discrete bees algorithm in remanufacturing , 2018, Int. J. Prod. Res..

[4]  Lang Xu,et al.  Sustainable manufacturing in a closed-loop supply chain considering emission reduction and remanufacturing , 2017 .

[5]  Mingzhou Liu,et al.  Remanufacturing production planning with compensation function approximation method , 2015, Appl. Math. Comput..

[6]  Sara Behdad,et al.  Simultaneous reassembly and procurement planning in assemble-to-order remanufacturing systems , 2017 .

[7]  Jian Gao,et al.  Progress and Application of Key Technologies on the Electronic Packaging Equipment Development , 2017 .

[8]  Min Huang,et al.  A modal interval based method for dynamic decision model considering uncertain quality of used products in remanufacturing , 2018, J. Intell. Manuf..

[9]  Kannan Govindan,et al.  Assessment of consumers' motivations to purchase a remanufactured product by applying Fuzzy Delphi method and single valued neutrosophic sets , 2018, Journal of Cleaner Production.

[10]  Tong Li,et al.  Optimal acquisition and remanufacturing policies considering the effect of quality uncertainty on carbon emissions , 2018 .

[11]  Dong-Ho Lee,et al.  Mathematical model and solution algorithms for capacitated dynamic lot-sizing in remanufacturing systems , 2018 .

[12]  Kang He,et al.  Study on the Failure Mechanism of the Polymorphic Mixture for Remanufactured Machinery Parts , 2018, Strength of Materials.

[13]  S. Jack Hu,et al.  Assembly Strategies for Remanufacturing Systems With Variable Quality Returns , 2013, IEEE Transactions on Automation Science and Engineering.

[14]  Yuan Zhang,et al.  Reassembly classification selection method based on the Markov Chain , 2018 .

[15]  John Bengson.  Practical Perception and Intelligent Action , 2016 .

[16]  Mingzhou Liu,et al.  Research on assembly quality adaptive control system for complex mechanical products assembly process under uncertainty , 2015, Comput. Ind..

[17]  D. Huisingh,et al.  Remanufacturing for the automotive aftermarket-strategic factors: literature review and future research needs , 2009 .

[18]  Jacqueline M. Bloemhof,et al.  Market prices of remanufactured, used and new items: Evidence from eBay , 2012 .

[19]  Qinghua Zhu,et al.  Optional classification for reassembly methods with different precision remanufactured parts , 2014 .

[20]  Wang Yujiang,et al.  The effects of solid-state phase transformation upon stress evolution in laser metal powder deposition , 2015 .

[21]  Biao Su.  Research on Selective Assembly Method Optimization for Construction Machinery Remanufacturing Based on Ant Colony Algorithm , 2017 .

[22]  Shun Jia,et al.  Emergy based sustainability evaluation of remanufacturing machining systems , 2018 .

[23]  Qiang Wang,et al.  Intelligent assembly system for mechanical products and key technology based on internet of things , 2014, Journal of Intelligent Manufacturing.

[24]  Hyongjun Choi,et al.  An investigation of inter-operator reliability tests for real-time analysis system. , 2007 .

[25]  Weihua Zhang,et al.  Production , Manufacturing and Logistics When remanufacturing meets product quality improvement : The impact of production cost , 2018 .

[26]  Zhichuan Tang,et al.  Research on the Control Method of an Upper-limb Rehabilitation Exoskeleton Based on Classification of Motor Imagery EEG , 2017 .

[27]  Yuanliang Zhang.  Review of Non-destructive Testing for Remanufacturing of High-end Equipment , 2013 .

[28]  Xu Lei,et al.  Study on laser cladding remanufacturing process with FeCrNiCu alloy powder for thin-wall impeller blade , 2017 .

[29]  Binshi Xu.  Prospects and Developing of Remanufacture Forming Technology , 2012 .

[30]  Reza Malekian,et al.  Development and trend of condition monitoring and fault diagnosis of multi-sensors information fusion for rolling bearings: a review , 2018 .

[31]  Tao Li,et al.  Comparative life cycle assessment of remanufacturing cleaning technologies , 2016 .

[32]  Shun Jia,et al.  Task-Oriented Energy Benchmark of Machining Systems for Energy-Efficient Production , 2020, International Journal of Precision Engineering and Manufacturing-Green Technology.

[33]  Ming-Lang Tseng,et al.  Selecting a remanufacturing quality strategy based on consumer preferences , 2017 .

[34]  Adem Orsdemir,et al.  Competitive Quality Choice and Remanufacturing , 2014 .

[35]  Kouhei Ohnishi,et al.  A sensorless approach for tool fracture detection in milling by integrating multi-axial servo information , 2016 .

[36]  Xi Zhang,et al.  Study on a tolerance grading allocation method under uncertainty and quality oriented for remanufactured parts , 2016 .

[37]  Ying Liu,et al.  An integrated decision-making method for selecting machine tool guideways considering remanufacturability , 2020, Int. J. Comput. Integr. Manuf..

[38]  Qinghua Zhu,et al.  Enhancing supply chain operations with extended corporate social responsibility practices by multinational enterprises: Social capital perspective from Chinese suppliers , 2019, International Journal of Production Economics.

[39]  Tsai-Yun Liao,et al.  Reverse logistics network design for product recovery and remanufacturing , 2018, Applied Mathematical Modelling.

[40]  Kang He,et al.  Developing the ecological compensation criterion of industrial solid waste based on emergy for sustainable development , 2018, Energy.

[41]  V. Daniel R. Guide,et al.  Building contingency planning for closed-loop supply chains with product recovery , 2003 .

[42]  Xiaoqiao Wang.  Online Control Threshold Optimization for Complex Mechanical Products Assembly Process Based on Hybrid Genetic Particle Swarm Optimization , 2016 .

[43]  Kampan Mukherjee,et al.  Analysis of product design characteristics for remanufacturing using Fuzzy AHP and Axiomatic Design , 2017 .

[44]  Joseph Sarkis,et al.  Measuring China's Circular Economy , 2013, Science.

[45]  Chen Xue.  Multi-objective Optimization Model and Application of Components Reuse Combination for Used Mechanical Equipment , 2017 .

[46]  Yi Liu,et al.  Microwave absorption property of plasma spray W-type hexagonal ferrite coating , 2015 .

[47]  S. Basu,et al.  Electron microprobe study of deposition and diffusion of tool material in electrical discharge machining , 1979 .

[48]  Neelesh Kumar Jain,et al.  Micro-Plasma Transferred Arc Additive Manufacturing for Die and Mold Surface Remanufacturing , 2016 .

[49]  Kenji Morita,et al.  Development of Real-Time Collection, Integration, and Sharing Technology for Infrastructure Damage Information , 2019 .

[50]  Erik Sundin,et al.  Remanufacturing challenges and possible lean improvements , 2018 .

[51]  Sanjay Sampath,et al.  Sustainability of Metal Structures via Spray-Clad Remanufacturing , 2018 .

[52]  Yanhua Zhao.  Research on Microstructure Properties and Wear and Corrosion Resistance of FeCr Repaired Coating on KMN Steel by Laser Cladding , 2015 .

[53]  Samar K. Mukhopadhyay,et al.  Joint procurement and production decisions in remanufacturing under quality and demand uncertainty , 2009 .

[54]  Zhiwu Li,et al.  Operation patterns analysis of automotive components remanufacturing industry development in China , 2017 .

[55]  Richard F. Hartl,et al.  Supply chain dynamics, control and disruption management , 2016 .

[56]  Conghu Liu,et al.  Tolerance Redistributing of the Reassembly Dimensional Chain on Measure of Uncertainty , 2016, Entropy.

[57]  Daniel W. Steeneck,et al.  Product design for leased products under remanufacturing , 2018, International Journal of Production Economics.

[58]  Jody Muelaner,et al.  A new paradigm in large-scale assembly—research priorities in measurement assisted assembly , 2014 .

[59]  Dong-Ho Lee,et al.  Scheduling algorithms for job-shop-type remanufacturing systems with component matching requirement , 2018, Comput. Ind. Eng..

[60]  Feng Qi,et al.  Research on multi-camera information fusion method for intelligent perception , 2017, Multimedia Tools and Applications.

[61]  Hua Zhang,et al.  An integrated MCDM approach considering demands-matching for reverse logistics , 2019, Journal of Cleaner Production.

[62]  Qianwang Deng,et al.  An environmental benefits and costs assessment model for remanufacturing process under quality uncertainty , 2018 .

[63]  Qinghua Zhu,et al.  Green supply chain management in China: pressures, practices and performance , 2005 .

[64]  K. Lai,et al.  Promoting sustainability of manufacturing industry through the lean energy-saving and emission-reduction strategy. , 2019, The Science of the total environment.

[65]  S. Vinodh,et al.  Application of interpretive structural modelling for analysis of factors influencing lean remanufacturing practices , 2016 .

[66]  Xiang Li,et al.  Optimal acquisition and production policy in a hybrid manufacturing/remanufacturing system with core acquisition at different quality levels , 2014, Eur. J. Oper. Res..

[67]  Kevin W. Li,et al.  Cooperative game approaches to coordinating a three-echelon closed-loop supply chain with fairness concerns , 2019, International Journal of Production Economics.

[68]  Yusuf Altintas,et al.  Integration of virtual and on-line machining process control and monitoring , 2017 .

[69]  Li Li,et al.  Energy performance certification in mechanical manufacturing industry: A review and analysis , 2019, Energy Conversion and Management.

[70]  Liu Ming-zho.  Quality Oriented Assembly Grouping Optimal Allocation Method for Remanufactured Complex Mechanical Products , 2014 .

[71]  Eleonora Bottani,et al.  Reverse Logistics: a stochastic EOQ-based inventory control model for mixed manufacturing/remanufacturing systems with return policies , 2012 .

[72]  Z. M. Bi,et al.  Reusing industrial robots to achieve sustainability in small and medium-sized enterprises (SMEs) , 2015, Ind. Robot.

[73]  Mingzhou Liu,et al.  The online quality control methods for the assembling of remanufactured engines’ cylinder block and cover under uncertainty , 2014 .

[74]  Jun Ni,et al.  Optimal control of reassembly with variable quality returns in a product remanufacturing system , 2011 .

[75]  Jochen Gönsch.  A Note on a Model to Evaluate Acquisition Price and Quantity of Used Products for Remanufacturing , 2015 .

[76]  Jody Muelaner,et al.  Uncertainty of measurement for large product verification: evaluation of large aero gas turbine engine datums , 2016 .

[77]  Jerzy Jozefczyk,et al.  Decision making for autonomous vehicles in the presence of uncertain information , 2010, 2010 Conference on Control and Fault-Tolerant Systems (SysTol).

[78]  Matthieu Rauch,et al.  STEP-NC compliant process planning of additive manufacturing: remanufacturing , 2017 .

[79]  Shun Jia,et al.  Emergy-based evaluation and improvement for sustainable manufacturing systems considering resource efficiency and environment performance , 2018, Energy Conversion and Management.

[80]  Wei Cai,et al.  The coupling mechanism of reassembly quality with uncertainty of remanufactured parts , 2019 .

[81]  Shuanggao Li,et al.  Uncertainties evaluation of coordinate transformation parameters in the large-scale measurement for aircraft assembly , 2018 .

[82]  Yan Wang,et al.  Reliability and cost optimization for remanufacturing process planning , 2016 .

[83]  Kevin W. Li,et al.  Impact of product-design strategies on the operations of a closed-loop supply chain , 2019, Transportation Research Part E: Logistics and Transportation Review.

[84]  Andrew Y. C. Nee,et al.  Automating design with intelligent human–machine integration , 2015 .

[85]  Dawid Polap,et al.  Human-machine interaction in intelligent technologies using the augmented reality , 2018, Inf. Technol. Control..

[86]  Muris Lage Junior,et al.  Master disassembly scheduling in a remanufacturing system with stochastic routings , 2017, Central Eur. J. Oper. Res..

[87]  Chee-Chong Teo,et al.  Optimizing a recover-and-assemble remanufacturing system with production smoothing , 2018 .

[88]  Bangyi Li,et al.  Trade-off between remanufacturing and recycling of WEEE and the environmental implication under the Chinese Fund Policy , 2017 .

[89]  Juan Alfonso Lara,et al.  A multi-agent system for minimizing information indeterminacy within information fusion scenarios in peer-to-peer networks with limited resources , 2018, Inf. Sci..

[90]  Jiali Zhao,et al.  Petri net-based scheduling strategy and energy modeling for the cylinder block remanufacturing under uncertainty , 2019, Robotics Comput. Integr. Manuf..

[91]  Heng Zhang,et al.  Supercritical carbon dioxide cleaning of metal parts for remanufacturing industry , 2015 .

[92]  Peijing Shi,et al.  Engineering Management Problems of Remanufacturing Industry , 2015 .

[93]  Binshi Xu,et al.  States and Prospects of China Characterised Quality Guarantee Technology System for Remanufactured Parts , 2013 .

[94]  Jianping Dou,et al.  Multi-objective optimization of buffer allocation for remanufacturing system based on TS-NSGAII hybrid algorithm , 2017 .

[95]  Dawn M. Tilbury,et al.  Real-Time Manufacturing Machine and System Performance Monitoring Using Internet of Things , 2018, IEEE Transactions on Automation Science and Engineering.

[96]  Zhao Xi,et al.  Optimization control method for carbon footprint of machining process , 2017 .

[97]  Chen Chen,et al.  An automatic generation method of the coordinate system for automatic assembly tolerance analysis , 2018 .

[98]  Nidhal Rezg,et al.  Optimization of Two-Level Disassembly/Remanufacturing/Assembly System with an Integrated Maintenance Strategy , 2018 .

[99]  Yan Wang,et al.  A hybrid approach of rough set and case-based reasoning to remanufacturing process planning , 2016, Journal of Intelligent Manufacturing.