Back-analysis of rock mass strength parameters using AE monitoring data

Abstract Most back-analyses in geotechnical engineering are based on methods that utilize field displacement monitoring data. In the present study, a novel method is developed to back-calculate rock mass strength parameters from AE (acoustic emission) monitoring data in combination with FEM stress analysis. The method is based on the important concept of generalized AE initiation threshold of rock masses, established from comprehensive data analysis of laboratory test and underground monitoring programs using AE and microseismic (MS) techniques. An easy-to-use Wizard is developed in Microsoft Excel™ to assist site engineers to perform the back-analysis. The efficient solver in Excel is utilized to reach the optimization solution of an objective function with constraints. The Wizard allows the user to complete the analysis process in an interactive fashion. One example is given to demonstrate the back-analysis process using AE monitoring data recorded from a cavern site. The rock mass strength parameters identified from this approach compare well with field test data, suggesting that the tool can be used effectively to back-calculate rock mass strength parameters from AE monitoring data.

[1]  P. K. Kaiser,et al.  Support of underground excavations in hard rock , 1995 .

[2]  S. Sakurais.  Monitoring Of Caverns During Construction Period , 1982 .

[3]  Evert Hoek,et al.  Putting numbers to geology—an engineer's viewpoint , 1999, Quarterly Journal of Engineering Geology.

[4]  C. Scholz.  The frequency-magnitude relation of microfracturing in rock and its relation to earthquakes , 1968 .

[5]  Masato Shinji,et al.  Back analysis for tunnel engineering as a modern observational method , 2003 .

[6]  P. K. Kaiser,et al.  Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system , 2004 .

[7]  Ming Cai,et al.  Generalized crack initiation and crack damage stress thresholds of brittle rock masses near underground excavations , 2004 .

[8]  Diederichs,et al.  Underground Works In Hard Rock Tunnelling And Mining , 2000 .

[9]  Olle Olsson,et al.  ZEDEX - a study of damage and disturbance from tunnel excavation by blasting and tunnel boring , 1997 .

[10]  V. S. Vutukuri,et al.  In-situ rock stress measurement from rock cores using the acoustic emission method and deformation rate analysis , 1999 .

[11]  Xinglin Lei,et al.  Compressive failure of mudstone samples containing quartz veins using rapid AE monitoring: the role of asperities , 2000 .

[12]  David J. Holcomb,et al.  General theory of the Kaiser effect , 1993 .

[13]  Giancarlo Gioda,et al.  Back analysis procedures for the interpretation of field measurements in geomechanics , 1987 .

[14]  Lorenzo Jurina,et al.  SOME ASPECTS OF CHARACTERIZATION PROBLEMS IN GEOMECHANICS , 1981 .

[15]  Giulio Maier,et al.  Direct search solution of an inverse problem in elastoplasticity: Identification of cohesion, friction angle andin situ stress by pressure tunnel tests , 1980 .

[16]  Hiroshi Morioka,et al.  FLAC/PFC coupled numerical simulation of AE in large-scale underground excavations , 2007 .

[17]  R. P. Young,et al.  Investigating the mechanics of microcrack damage induced under true-triaxial unloading , 1998 .

[18]  N. A. Chandler,et al.  The progressive fracture of Lac du Bonnet granite , 1994 .

[19]  D. R. McCreath,et al.  Rockmass Damage Initiation Around the Sudbury Neutrino Observatory Cavern , 1996 .

[20]  P. K. Kaiser,et al.  Stress determination by back-analysis of excavation-induced stress changes — a case study , 1990 .

[21]  Xinglin Lei,et al.  On the spatio‐temporal distribution of acoustic emissions in two granitic rocks under triaxial compression: The role of pre‐existing cracks , 2000 .

[22]  Dan M. Frangopol,et al.  Bayesian estimation of rock mass boundary conditions with applications to the AECL underground research laboratory , 2001 .

[23]  C. Martin,et al.  Seventeenth Canadian Geotechnical Colloquium: The effect of cohesion loss and stress path on brittle rock strength , 1997 .

[24]  C. Derek Martin,et al.  The role of convergence measurements in characterizing a rock mass , 1996 .

[25]  Z. T. Bieniawski.  Mechanism of brittle fracture of rock. Parts 1-3 , 1967 .

[26]  Z. T. Bieniawski,et al.  Mechanism of brittle fracture of rockPart Itheory of the fracture process , 1967 .

[27]  Hiroshi Morioka,et al.  Evaluation of loosened zones on excavation of a large underground rock cavern and application of observational construction techniques , 2003 .

[28]  C. Scholz,et al.  Dilatancy in the fracture of crystalline rocks , 1966 .

[29]  A. Karakas.  Practical Rock Engineering , 2008 .

[30]  D. Lockner,et al.  Quasi-static fault growth and shear fracture energy in granite , 1991, Nature.

[31]  O. Zienkiewicz,et al.  Rock mechanics in engineering practice , 1968 .