Current status and prospects of SiCf/SiC for fusion structural applications

Abstract This article provides an overview of the main characteristics of SiC f /SiC that suggest the use of this SiC-based composite as a structural material for the blanket in future fusion reactors, a brief description of its structure and the role of its main constituents. The relevant fabrication processes and their ability to produce a material with the required properties are also summarised. The main part of the paper is devoted to an assessment of the state-of-the-art materials, and the basic requirements for the target material are discussed in terms of the achieved properties. The key issues and areas of uncertainty are described and suggestions for overcoming them are presented.

[1]  Aljaž Iveković,et al.  Fabrication of SiCf/SiC composites by SITE-P process , 2012 .

[2]  Jacques Lamon,et al.  Fracture Toughness of 2‐D Woven SiC/SiC CVI‐Composites with Multilayered Interphases , 1996 .

[3]  Akira Kohyama,et al.  Property Tailorability for Advanced CVI Silicon Carbide composites for Fusion , 2006 .

[4]  Karren L. More,et al.  Low dose irradiation performance of SiC interphase SiC/SiC composites , 1998 .

[5]  Akira Kohyama,et al.  Crack initiation and growth characteristics in SiC/SiC under indentation test , 1998 .

[6]  L. S. Sigl,et al.  Thermal conductivity of liquid phase sintered silicon carbide , 2003 .

[7]  Xin-bo He,et al.  Preparation of SiC fiber-reinforced SiC composites , 2005 .

[8]  Jarir Aktaa,et al.  Study of helium embrittlement in boron doped EUROFER97 steels , 2009 .

[9]  Akira Kohyama,et al.  Thermo-mechanical properties and microstructure of silicon carbide composites fabricated by nano-infiltrated transient eutectoid process , 2002 .

[10]  K. A. Schwetz,et al.  Silicon Carbide Based Hard Materials , 2008 .

[11]  Akira Kohyama,et al.  Effect of Heat Treatment on Microstructure and Mechanical Properties of Stoichiometric SiC/SiC Composites , 2004 .

[12]  Xavier Bourrat,et al.  TEM structure of (PyC/SiC)n multilayered interphases in SiC/SiC composites , 2000 .

[13]  M. Ferraris,et al.  Silicon carbide composites as fusion power reactor structural materials , 2011 .

[14]  Akira Kohyama,et al.  Issues and advances in SiCf/SiC composites development for fusion reactors , 2004 .

[15]  Charles H. Henager,et al.  Low-activation joining of SiC/SiC composites for fusion applications , 2011 .

[16]  M. N. A. Beurskens,et al.  JET ITER-like wall—overview and experimental programme , 2011 .

[17]  Y. Katoh,et al.  Handbook of SiC properties for fuel performance modeling , 2007 .

[18]  Steven J. Zinkle,et al.  Advanced materials for fusion technology , 2005 .

[19]  Aljaž Iveković,et al.  Preparation of SiCf/SiC composites by the slip infiltration and transient eutectoid (SITE) process , 2010 .

[20]  Akira Kohyama,et al.  Fabrication of advanced SiC fiber/F-CVI SiC matrix composites with SiC/C multi-layer interphase , 2004 .

[21]  Mark S. Tillack,et al.  High performance blanket for ARIES-AT power plant , 2001 .

[22]  Lance Lewis Snead,et al.  Effect of neutron irradiation on fracture resistance of advanced SiC/SiC composites , 2011 .

[23]  Zhou Xingui,et al.  Microstructure, mechanical properties and reaction mechanism of KD-1 SiCf/SiC composites fabricated by chemical vapor infiltration and vapor silicon infiltration , 2011 .

[24]  Shiro Jitsukawa,et al.  Highly thermal conductive, sintered SiC fiber-reinforced 3D-SiC/SiC composites: experiments and finite-element analysis of the thermal diffusivity/conductivity , 2002 .

[25]  Lance Lewis Snead,et al.  Advanced Radiation-Resistant Ceramic Composites , 2006 .

[26]  Akira Kohyama,et al.  Joining of SiC-based materials for nuclear energy applications , 2011 .

[27]  Masashi Shimada,et al.  Tritium trapping in silicon carbide in contact with solid breeder under high flux isotope reactor irradiation , 2013 .

[28]  Spomenka Kobe,et al.  Fabrication of CNT-SiC/SiC composites by electrophoretic deposition , 2010 .

[29]  A. Kukushkin,et al.  Material erosion at the vessel walls of future fusion devices , 2003 .

[30]  M. Balasubramanian,et al.  Effect of intermediate heat treatment on mechanical properties of SiCf/SiC composites with BN interphase prepared by ICVI , 2011 .

[31]  F. Castro,et al.  Liquid phase sintering of SiC with additions of Y2O3, Al2O3 and SiO2 , 2004 .

[32]  Ralf Riedel,et al.  Handbook of ceramic hard materials. , 2000 .

[33]  Yutai Katoh,et al.  PSI issues at plasma facing surfaces of blankets in fusion reactors , 2003 .

[34]  J. D. Landes,et al.  Influence of fiber coating thickness on fracture behavior of continuous woven Nicalon® fabric-reinforced silicon-carbide matrix ceramic composites , 2001 .

[35]  Akira Kohyama,et al.  R&D of joining technology for SiC components with channel , 2009 .

[36]  S. Zinkle,et al.  Operating temperature windows for fusion reactor structural materials , 2000 .

[37]  Mamoru Omori,et al.  Synthesis of Continuous Sic Fibers with High Tensile Strength , 1976 .

[38]  Akira Kohyama,et al.  High temperature characterization of LPS-SiC based materials with oxide additives , 2009 .

[39]  Lance Lewis Snead,et al.  Thermophysical and mechanical properties of near-stoichiometric fiber CVI SiC/SiC composites after neutron irradiation at elevated temperatures , 2010 .

[40]  J. Bouix,et al.  SiC/SiC minicomposites with structure-graded BN interphases , 2000 .

[41]  Tatsuya Hinoki,et al.  The influence of sintering additives on the irradiation resistance of NITE SiC , 2011 .

[42]  Jun Wang,et al.  Microstructural investigations of the pyrocarbon interphase in SiC fiber-reinforced SiC matrix composites , 2009 .

[43]  Rajesh Mishra,et al.  3-Dimensional weaving , 2008 .

[44]  政規 小谷,et al.  アリルハイドライドポリカルボシラン(AHPCS)を用いたSiC/SiC複合材料の作製とその耐酸化特性 , 2003 .

[45]  Akira Kohyama,et al.  Mechanical properties of several advanced Tyranno-SA fiber-reinforced CVI-SiC matrix composites , 2003 .

[46]  A. Bunsell,et al.  A review of the development of three generations of small diameter silicon carbide fibres , 2006 .

[47]  R. Yamada,et al.  Thermal diffusivity/conductivity of Tyranno SA fiber- and Hi-Nicalon Type S fiber-reinforced 3-D SiC/SiC composites , 2004 .

[48]  Alberto Ortona,et al.  Manufacturing SiC‐Fiber‐Reinforced SiC Matrix Composites by Improved CVI/Slurry Infiltration/Polymer Impregnation and Pyrolysis , 2004 .

[49]  Katsumi Yoshida,et al.  Formation of carbon coating on SiC fiber for two-dimensional SiCf/SiC composites by electrophoretic deposition , 2009 .

[50]  Mark S. Tillack,et al.  Design and material issues for high performance SiCf/SiC-based fusion power cores , 2001 .

[51]  Yigal D. Blum,et al.  Coatings and joining for SiC and SiC-composites for nuclear energy systems , 2007 .

[52]  Akira Kohyama,et al.  Microstructural optimization of high-temperature SiC/SiC composites by NITE process , 2009 .

[53]  R. Scanlan,et al.  Effect of Boron and Carbon on Sintering of SIC , 1975 .

[54]  Timothy D. Burchell,et al.  Structure-related property changes in polycrystalline graphite under neutron irradiation , 1994 .

[55]  Lance Lewis Snead,et al.  Damage production and accumulation in SiC structures in inertial and magnetic fusion systems , 2011 .

[56]  Lance Lewis Snead,et al.  Transmutation of silicon carbide in fusion nuclear environment , 2013 .

[57]  Akira Kohyama,et al.  Interfacial reactions and mechanical properties of W?SiC in-situ joints for plasma facing components , 2004 .

[58]  Aljaž Iveković,et al.  Densification of a SiC-matrix by electrophoretic deposition and polymer infiltration and pyrolysis process , 2011 .

[59]  H. Miura,et al.  Improved tokamak concept focusing on easy maintenance , 1998 .

[60]  Jacques Lamon,et al.  The concept of a strong interface applied to SiC/SiC composites with a BN interphase , 2000 .

[61]  Walter Krenkel,et al.  Ceramic Matrix Composites , 2008 .

[62]  Yongdong Xu,et al.  High performance 3D textile Hi-Nicalon SiC/SiC composites by chemical vapor infiltration , 2001 .

[63]  Louise P. Brown,et al.  Modelling the geometry of textile reinforcements for composites: TexGen , 2011 .

[64]  Akira Kohyama,et al.  Microstructural and mechanical characteristics of SiC/SiC composites with modified-RS process , 2001 .

[65]  Akira Kohyama,et al.  Preparation of SiC/SiC Composites by Hot Pressing, Using Tyranno-SA Fiber as Reinforcement , 2003 .

[66]  Lance Lewis Snead,et al.  Mechanical properties of thin pyrolitic carbon interphase SiC-matrix composites reinforced with near-stoichiometric SiC fibers , 2005 .

[67]  W. Wampler,et al.  The use of silicon carbide as a tritium permeation barrier , 1995 .

[68]  Akira Kohyama,et al.  Properties and radiation effects in high-temperature pyrolyzed PIP-SiC/SiC , 2001 .

[69]  R. A. Forrest,et al.  Neutronic aspects of the safety and environmental performance of silicon carbide as blanket structural material , 2001 .

[70]  Huijun Li,et al.  Recent progress in research on tungsten materials for nuclear fusion applications in Europe , 2013 .

[71]  Krishan K. Chawla,et al.  Composite Materials: Science and Engineering , 1987 .