Influence of Manufacturing Constraints on the Topology Optimization of an Automotive Dashboard

Abstract Topology Optimization (TO) methods optimize material layout to design light-weight and high-performance products. However, TO methods, applied for components or assembly with high complexity shape or for structures with copious number of parts respectively, do not usually take into account the manufacturability of the optimized geometries, then a heavy further work is required to engineer the product, risking to compromise the mass reduction achieved. Within an Industry 4.0 approach, we propose to evaluate manufacturing constraints since early stages of the conceptual design to perform a TO coherent with the manufacturing technology chosen. Several approaches of TO with different manufacturing constraints such as casting and extrusion are proposed and each solution is compared. The optimum conceptual design is determined in order to minimize the component weight while satisfying both the structural targets and the manufacturing constraints; a case study on a high-performance sport car dashboard is finally presented.

[1]  Glaucio H. Paulino,et al.  Topology optimization with manufacturing constraints: A unified projection-based approach , 2016, Adv. Eng. Softw..

[2]  Matteo Giacopini,et al.  A repertoire of failures in connecting rods for internal combustion engines, and indications on traditional and advanced design methods , 2016 .

[3]  Luca Weisz,et al.  Design Sensitivity Analysis Of Structural Systems , 2016 .

[4]  Liping Chen,et al.  A crossing sensitivity filter for structural topology optimization with chamfering, rounding, and checkerboard-free patterns , 2009 .

[5]  A. Clausen.  Topology Optimization for Additive Manufacturing , 2016 .

[6]  Andrea Baldini,et al.  Sport car space-frame chassis design in view of weight reduction , 2010 .

[7]  Yonghua Chen,et al.  Manufacturable mechanical part design with constrained topology optimization , 2012 .

[8]  Andrea Baldini,et al.  Automotive Chassis Topology Optimization:a Comparison Between Spider and Coup´e Designs , 2011, WCE 2011.

[9]  Martin Leary,et al.  Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structures , 2014 .

[10]  Enrico Torricelli,et al.  STRUCTURAL OPTIMIZATION OF AUTOMOTIVE CHASSIS : THEORY , SET UP , DESIGN Marco Cavazzuti and , 2011 .

[11]  Edward J. Haug,et al.  Design Sensitivity Analysis of Structural Systems , 1986 .

[12]  Ying Wei,et al.  Topology optimization for manufacturability based on the visibility map , 2015 .

[13]  Andrea Baldini,et al.  High performance automotive chassis design: a topology optimization based approach , 2011 .

[14]  J. Petersson,et al.  Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh-dependencies and local minima , 1998 .

[15]  Yunqing Zhang,et al.  Manufacturing- and machining-based topology optimization , 2006 .

[16]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[17]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[18]  Jingzhou Yang,et al.  Study of key algorithms in topology optimization , 2007 .

[19]  François Cuenot,et al.  CO2 emissions from new cars and vehicle weight in Europe; How the EU regulation could have been avoided and how to reach it? , 2009 .

[20]  Sara Mantovani,et al.  Dynamic Modal Correlation of an Automotive Rear Subframe, with Particular Reference to the Modelling of Welded Joints , 2017 .

[21]  Helena Titheridge,et al.  Vehicle mass as a determinant of fuel consumption and secondary safety performance , 2009 .

[22]  I. Ashcroft,et al.  Topology Optimization for Additive Manufacturing , 2011 .