论文信息 - Dynamic analysis of a hybrid cable-suspended planar manipulator

Dynamic analysis of a hybrid cable-suspended planar manipulator

This idea introduces a tilting angle amplification system for the cable planar parallel robots. The end-effector rotation capability is increased by adding a serial linkage to the parallel platform. The hybrid serial-parallel robot has the features of both of the parallel manipulator and the serial manipulator. The manipulator is modeled in terms of full dynamics using Newton-Euler and Lagrange methods based analytical approaches.

Mahdi Bamdad | Farzin Taheri | Niloofar Abtahi

[1] Paolo Gallina,et al. Cable-direct-driven-robot (CDDR) with a 3-link passive serial support , 2014 .

[2] H. Harry Asada,et al. The Winch-Bot: A cable-suspended, under-actuated robot utilizing parametric self-excitation , 2009, 2009 IEEE International Conference on Robotics and Automation.

[3] Moharam Habibnejad Korayem,et al. Dynamic load-carrying capacity of cable-suspended parallel manipulators , 2009 .

[4] James S. Albus,et al. The NIST robocrane , 1993, J. Field Robotics.

[5] Paolo Gallina,et al. Cable-Direct-Driven Robot (CDDR) with Passive SCARA Support: Theory and Simulation , 2006, J. Intell. Robotic Syst..

[6] Clément Gosselin,et al. Point-to-point motion control of a pendulum-like 3-dof underactuated cable-driven robot , 2010, 2010 IEEE International Conference on Robotics and Automation.

[7] Alberto Trevisani,et al. Planning of dynamically feasible trajectories for translational, planar, and underconstrained cable-driven robots , 2013, J. Syst. Sci. Complex..

[8] Sunil K. Agrawal,et al. On the Design of Cable-Suspended Planar Parallel Robots , 2005 .

[9] Hisashi Osumi,et al. Development of a manipulator suspended by parallel wire structure , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).