Electrospun fabrication of nanofibers as high-performance cathodes of solid oxide fuel cells

[1]  P. Costamagna,et al.  Electrochemical impedance spectroscopy of La0.6Sr0.4Co0.2Fe0.8O3-δ nanofiber cathodes for intermediate temperature-solid oxide fuel cell applications: A case study for the ‘depressed’ or ‘fractal’ Gerischer element , 2019, Electrochimica Acta.

[2]  M. Andersson,et al.  Progress in the use of electrospun nanofiber electrodes for solid oxide fuel cells: a review , 2019 .

[3]  Wei Liu,et al.  High performance BaCe0.5Fe0.5-xBixO3-δ as cobalt-free cathode for proton-conducting solid oxide fuel cells , 2019, Journal of Alloys and Compounds.

[4]  L. Bi,et al.  Cobalt-free nanofiber cathodes for proton conducting solid oxide fuel cells , 2019, Electrochemistry Communications.

[5]  Wei Liu,et al.  Electrochemical performance of nanostructured LNF infiltrated onto LNO cathode for BaZr0.1Ce0.7Y0.2O3-δ–based solid oxide fuel cell , 2018, International Journal of Hydrogen Energy.

[6]  B. Aliakbarian,et al.  Parameter Optimization for the Electrospinning of La1–xSrxCo1–yFeyO3–δ Fibers for IT‐SOFC Electrodes , 2017 .

[7]  M. Andersson,et al.  Fabrication of Nickel-YSZ cermet nanofibers via electrospinning , 2017 .

[8]  B. Sundén,et al.  Co-fabrication of nickel-YSZ cermet nanofibers via an electrospinning technique , 2017 .

[9]  Ryan O'Hayre,et al.  Zr and Y co-doped perovskite as a stable, high performance cathode for solid oxide fuel cells operating below 500 °C , 2017 .

[10]  Y. Xiong,et al.  Electro-spinning Pr0.4Sr0.6Co0.2Fe0.7Nb0.1O3−δ nanofibers infiltrated with Gd0.2Ce0.8O1.9 nanoparticles as cathode for intermediate temperature solid oxide fuel cell , 2016 .

[11]  Jong‐Won Lee,et al.  Effect of GDC addition method on the properties of LSM–YSZ composite cathode support for solid oxide fuel cells , 2016 .

[12]  S. Cavaliere.  Electrospinning for Advanced Energy and Environmental Applications , 2015 .

[13]  Lei Bi,et al.  Reversible solid oxide fuel cells (R-SOFCs) with chemically stable proton-conducting oxides , 2015 .

[14]  Zhe Zhao,et al.  Enhanced oxygen reduction activity and solid oxide fuel cell performance with a nanoparticles-loaded cathode. , 2015, Nano letters.

[15]  H Zhao,et al.  La1.6Sr0.4NiO4 one-dimensional nanofibers as cathode for solid oxide fuel cells , 2014 .

[16]  Y. Shul,et al.  Electrochemical characteristics of electrospun La0.6Sr0.4Co0.2Fe0.8O3−δ-Gd0.1Ce0.9O1.95 cathode , 2014 .

[17]  F. Chen,et al.  Hierarchically oriented macroporous anode-supported solid oxide fuel cell with thin ceria electrolyte film. , 2014, ACS applied materials & interfaces.

[18]  N. Menzler,et al.  An intermediate-temperature solid oxide fuel cell with electrospun nanofiber cathode , 2012 .

[19]  R. Gemmen,et al.  Nanofiber scaffold for cathode of solid oxide fuel cell , 2011 .

[20]  J. Vohs,et al.  Fabrication of LSM–YSZ Composite Electrodes by Electrodeposition , 2010 .

[21]  Scott A. Barnett,et al.  Effect of composition of (La0.8Sr0.2MnO3–Y2O3-stabilized ZrO2) cathodes: Correlating three-dimensional microstructure and polarization resistance , 2010 .

[22]  Peter Vang Hendriksen,et al.  Microstructural studies on degradation of interface between LSM–YSZ cathode and YSZ electrolyte in SOFCs , 2009 .

[23]  Raymond J. Gorte,et al.  High‐Performance SOFC Cathodes Prepared by Infiltration , 2009 .

[24]  S. Jiang,et al.  Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review , 2008 .

[25]  Koichi Kobayashi,et al.  Characterization of LSM-YSZ composite electrode by ac impedance spectroscopy , 2001 .

[26]  F. Tietz,et al.  Evaluation of La–Sr–Co–Fe–O perovskites for solid oxide fuel cells and gas separation membranes , 2000 .

[27]  Abdul-Majeed Azad,et al.  Fabrication of yttria-stabilized zirconia nanofibers by electrospinning , 2006 .