Spark plasma sintering of TiN ceramics codoped with SiC and CNT

[1]  Mehdi Shahedi Asl,et al.  Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC , 2019, Ceramics International.

[2]  Mehdi Shahedi Asl,et al.  Spark plasma sintering of TiAl–Ti3AlC2 composite , 2018, Ceramics International.

[3]  Mehdi Shahedi Asl,et al.  Phase evolution during spark plasma sintering of novel Si3N4-doped TiB2–SiC composite , 2018, Materials Characterization.

[4]  Mehdi Shahedi Asl,et al.  Reinforcing effects of SiC whiskers and carbon nanoparticles in spark plasma sintered ZrB2 matrix composites , 2018, Ceramics International.

[5]  Mehdi Shahedi Asl,et al.  Microstructural development during spark plasma sintering of ZrB2–SiC–Ti composite , 2018, Ceramics International.

[6]  Mehdi Shahedi Asl,et al.  TEM characterization of spark plasma sintered ZrB2–SiC–graphene nanocomposite , 2018, Ceramics International.

[7]  Mehdi Shahedi Asl,et al.  Synergistic effects of graphite nano-flakes and submicron SiC particles on the characteristics of spark plasma sintered ZrB2 nanocomposites , 2018, International Journal of Refractory Metals and Hard Materials.

[8]  Mehdi Shahedi Asl,et al.  Effects of spark plasma sintering temperature on densification, hardness and thermal conductivity of titanium carbide , 2018, Ceramics International.

[9]  Mehdi Shahedi Asl,et al.  Microstructural investigation of spark plasma sintered TiB2 ceramics with Si3N4 addition , 2018, Ceramics International.

[10]  Mehdi Shahedi Asl,et al.  A novel ZrB2–VB2–ZrC composite fabricated by reactive spark plasma sintering , 2018, Materials Science and Engineering: A.

[11]  Mehdi Shahedi Asl,et al.  Densification improvement of spark plasma sintered TiB2-based composites with micron-, submicron- and nano-sized SiC particulates , 2018, Ceramics International.

[12]  Mehdi Shahedi Asl,et al.  Effects of carbon additives on the properties of ZrB2–based composites: A review , 2018 .

[13]  Mehdi Shahedi Asl.  A statistical approach towards processing optimization of ZrB2–SiC–graphite nanocomposites. Part I: Relative density , 2018 .

[14]  Mehdi Shahedi Asl,et al.  Effects of nano-graphite content on the characteristics of spark plasma sintered ZrB2–SiC composites , 2018 .

[15]  Z. Farhat,et al.  The influence of Mo2C additions on the microstructural development and sintering response of TiN-Ni3Al cermets , 2018 .

[16]  Mehdi Shahedi Asl,et al.  Effects of sintering temperature on microstructure and mechanical properties of spark plasma sintered titanium , 2018 .

[17]  A. Domínguez-Rodríguez,et al.  Spark plasma sintering of titanium nitride in nitrogen: Does it affect the sinterability and the mechanical properties? , 2017 .

[18]  Mehdi Shahedi Asl.  Microstructure, hardness and fracture toughness of spark plasma sintered ZrB2–SiC–Cf composites , 2017 .

[19]  Mehdi Shahedi Asl,et al.  Contribution of SiC particle size and spark plasma sintering conditions on grain growth and hardness of TiB2 composites , 2017 .

[20]  Mehdi Shahedi Asl,et al.  Effects of in-situ formed TiB whiskers on microstructure and mechanical properties of spark plasma sintered Ti–B4C and Ti–TiB2 composites , 2017 .

[21]  Mehdi Shahedi Asl,et al.  Sintering behavior of ZrB2–SiC composites doped with Si3N4: A fractographical approach , 2017 .

[22]  Mehdi Shahedi Asl,et al.  Optimization of effective parameters on thermal shock resistance of ZrB2-SiC-based composites prepared by SPS: Using Taguchi design , 2017 .

[23]  Mehdi Shahedi Asl,et al.  Densification, microstructure and mechanical properties of hot pressed ZrB2–SiC ceramic doped with nano-sized carbon black , 2017 .

[24]  Lei Cao,et al.  Strengthening and toughening of TiN-based and TiB2-based ceramic tool materials with HfC additive , 2017 .

[25]  Mehdi Shahedi Asl,et al.  Effect of TiB2 content on the characteristics of spark plasma sintered Ti–TiBw composites , 2017 .

[26]  Mehdi Shahedi Asl,et al.  Effect of different additives and open porosity on fracture toughness of ZrB2–SiC-based composites prepared by SPS , 2017 .

[27]  K. Zhou,et al.  Effect of TiC addition on the microstructure and mechanical properties of TiN-based cermets , 2017 .

[28]  I. Shon.  Enhanced mechanical properties of TiN-graphene composites rapidly sintered by high-frequency induction heating , 2017 .

[29]  Mehdi Shahedi Asl,et al.  Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part II: Grain growth , 2016 .

[30]  Mehdi Shahedi Asl,et al.  Characterization of hot pressed SiC whisker reinforced TiB2 based composites , 2016 .

[31]  Mehdi Shahedi Asl,et al.  Interfacial phenomena and formation of nano-particles in porous ZrB2–40 vol% B4C UHTC , 2016 .

[32]  S. Henschel,et al.  Microstructure and mechanical properties of bulk TiN–AlN composites processed by FAST/SPS , 2016 .

[33]  Mehdi Shahedi Asl,et al.  Influence of silicon carbide addition on the microstructural development of hot pressed zirconium and titanium diborides , 2016 .

[34]  Mehdi Shahedi Asl,et al.  Characteristics of multi-walled carbon nanotube toughened ZrB2–SiC ceramic composite prepared by hot pressing , 2016 .

[35]  Mehdi Shahedi Asl,et al.  Temperature dependence of microstructure evolution during hot pressing of ZrB2–30 vol.% SiC composites , 2016 .

[36]  Mehdi Shahedi Asl,et al.  Fractographical characterization of hot pressed and pressureless sintered SiAlON-doped ZrB2-SiC composites , 2015 .

[37]  C. Schimpf,et al.  Bulk titanium nitride ceramics – Significant enhancement of hardness by silicon nitride addition, nanostructuring and high pressure sintering , 2015 .

[38]  K. Ozaki,et al.  Effect of mechanical milling of elemental powders on interface formation in TiN–Ni cermets prepared by pulsed current sintering , 2015 .

[39]  T. Goto,et al.  Spark plasma sintering of TiN–TiB2–hBN composites and their properties , 2015 .

[40]  T. Goto,et al.  Spark plasma sintering of TiN–TiB2 composites , 2014 .

[41]  P. Putyra,et al.  TiN–TiB2 composites prepared by various sintering techniques , 2013 .

[42]  K. Roh,et al.  The effect of ball milling on the mechanical properties of TiN consolidated by pulsed current activated sintering , 2013 .

[43]  Guo‐Jun Zhang,et al.  Effect of sintering atmosphere on the densification behavior of hot pressed TiN ceramics , 2013 .

[44]  Y. Sakka,et al.  Synthesis and consolidation of TiN/TiB2 ceramic composites via reactive spark plasma sintering , 2011 .

[45]  J. Ouyang,et al.  Isothermal oxidation behavior of reactive hot-pressed TiN–TiB2 ceramics at elevated temperatures , 2011 .

[46]  Jow-Lay Huang,et al.  Microstructure and mechanical properties of TiN/Si3N4 nanocomposites by spark plasma sintering (SPS) , 2010 .

[47]  P. Midgley,et al.  Fabrication and characterization of TiN nanocomposite powders fabricated by DC arc-plasma method , 2010 .

[48]  C. Monticelli,et al.  Triboelectrochemical behaviour of a Si3N4-TiN ceramic composite and a titanium alloy commonly used in biomedical applications , 2009 .

[49]  Guangya Hou,et al.  Processing of porous TiN/C ceramics from biological templates , 2007 .

[50]  Lianjun Wang,et al.  Consolidation of Nano‐Sized TiN Powders by Spark Plasma Sintering , 2006 .

[51]  J. Groza,et al.  Field‐Assisted Sintering of Nanocrystalline Titanium Nitride , 2004 .

[52]  Hsyi-En Cheng,et al.  Correlation between process parameters, microstructure and hardness of titanium nitride films by chemical vapor deposition , 2004 .

[53]  V. Krstić,et al.  Reaction sintering of TiN-TiB2 ceramics , 2003 .

[54]  Seungyoung Park,et al.  Densification of TiN-Ni cermets by improving wettability of liquid nickel on TiN grain surface with addition of Mo2C , 1999 .

[55]  K. Kim,et al.  Structural, optical, and electronic properties of cubic TiNx compounds , 1999 .

[56]  F. Lévy,et al.  Improving the properties of titanium nitride by incorporation of silicon , 1998 .

[57]  J. Celis,et al.  Dry sliding wear of TiN based ternary PVD coatings , 1993 .

[58]  W. Lengauer.  Properties of bulk δ-TiN1-x prepared by nitrogen diffusion into titanium metal , 1992 .

[59]  F. Riley,et al.  The production of titanium nitride by the carbothermal nitridation of titanium dioxide powder , 1991 .

[60]  T. Aizawa,et al.  Mechanical properties of bulk sintered titanium nitride ceramics , 2001 .