Wave tank testing of scaled models is standard practice during the development of floating wind turbine platforms for the validation of the dynamics of conceptual designs. Reliable recreation of the dynamics of a full scale floating wind turbine by a scaled model in a basin requires the precise scaling of the masses and inertias and also the relevant forces and its frequencies acting on the system. The scaling of floating wind turbines based on the Froude number is customary for basin experiments. This method preserves the hydrodynamic similitude, but the resulting Reynolds number is much lower than in full scale. The aerodynamic loads on the rotor are therefore out of scale. Several approaches have been taken to deal with this issue, like using a tuned drag disk or redesigning the scaled rotor. This paper describes the implementation of an alternative method based on the use of a ducted fan located at the model tower top in the place of the rotor. The fan can introduce a variable force that represents the total wind thrust by the rotor. A system controls this force by varying the rpm, and a computer simulation of the full scale rotor provides the desired thrust to be introduced by the fan. This simulation considers the wind turbine control, gusts, turbulent wind, etc. The simulation is performed in synchronicity with the test and it is fed in real time by the displacements and velocities of the platform captured by the acquisition system. Thus, the simulation considers the displacements of the rotor within the wind field and the calculated thrust models the effect of the aerodynamic damping. The system is not able currently to match the effect of gyroscopic momentum. The method has been applied during a test campaign of a semisubmersible platform with full catenary mooring lines for a 6MW wind turbine in scale 1/40 at Ecole Centrale de Nantes. Several tests including pitch free decay under constant wind and combined wave and wind cases have been performed. Data from the experiments are compared with aero-servo-hydro-elastic computations with good agreement showing the validity of the method for the representation of the scaled aerodynamics. The new method for the aerodynamic thrust scaling in basin tests is very promising considering its performance, versatility and lower cost in comparison with other methods.
[1]
Dominique Roddier,et al.
WindFloat: A floating foundation for offshore wind turbines
,
2010
.
[2]
Jason Jonkman,et al.
Summary of Conclusions and Recommendations Drawn From the DeepCwind Scaled Floating Offshore Wind System Test Campaign
,
2013
.
[3]
Andreas Rettenmeier,et al.
Collation of offshore wind‐wave dynamics: Marine Renewables Infrastructure Network for Emerging Energy Technologies D2.4
,
2012
.
[4]
Richard W. Kimball,et al.
Design and Testing of Scale Model Wind Turbines for Use in Wind/Wave Basin Model Tests of Floating Offshore Wind Turbines
,
2013
.
[5]
Jason Jonkman,et al.
Importance of Second-Order Difference-Frequency Wave-Diffraction Forces in the Validation of a FAST Semi-Submersible Floating Wind Turbine Model
,
2013
.
[6]
J. Jonkman,et al.
Definition of a 5-MW Reference Wind Turbine for Offshore System Development
,
2009
.
[7]
Jason Jonkman,et al.
Dynamics Modeling and Loads Analysis of an Offshore Floating Wind Turbine
,
2007
.
[8]
J. N. Newman.
Second-order, slowly-varying Forces on Vessels in Irregular Waves
,
1974
.
[9]
Torgeir Moan,et al.
Offshore Code Comparison Collaboration within IEA Wind Task 23:Phase IV Results Regarding Floating Wind Turbine Modeling: 2010 European Wind Energy Conference (EWEC) 20-23 April 2010, Warsaw, Poland, April 2010
,
2010
.
[10]
Jens Nørkær Sørensen,et al.
The Science of Making Torque from Wind 2014 (TORQUE 2014)
,
2014
.