Behavior of paper on a high speed conveyor subjected to air jet impingement: a method for estimating bending stiffness

Stiffness based sorting of mixed paper waste at high speed is desirable for sorting board, cardstock, and paper from each other for efficient recycling. We propose a quick, non-contact method for measuring the relative stiffness of paper samples moving on a conveyor at high speeds. The method consists of impinging an air jet on a moving paper sample while it is crossing a gap during transfer from one conveyor belt to another. The deflection caused by the impinging air jet can be measured and used to categorize different grades of paper. In this paper, we report results from a simulation of the proposed method using a finite element model. Influence of conveyor speed, sample orientation and nozzle pressure is studied using the model. Results indicate that the stiffness estimation has sufficient resolution to distinguish between board and paper grades at high conveyor speeds.

[1]  Noncontact determination of the bending stiffness of paper using laser ultrasonics and wavelet analysis: effects of moisture and temperature , 2001, 2001 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.01CH37263).

[2]  B. Castagnede,et al.  An optimization approach for the determination of in-plane elastic constants of paper , 1992 .

[3]  M. K. Ramasubramanian,et al.  A Computational Mechanics Model for the Brim Forming Process in Paperboard Container Manufacturing , 1999 .

[4]  C. Habeger,et al.  Ultrasonic plate waves in paper , 1979 .

[5]  R. E. Russo,et al.  Laser Ultrasonics on Moving Paper , 1999 .

[6]  T. Leppänen,et al.  Mathematical modelling of moisture induced out-of-plane deformation of a paper sheet , 2005 .

[7]  L. A. Jeffers,et al.  Development of a prototype lignin concentration sensor , 1993 .

[8]  Yves H. Berthelot,et al.  Theory of laser-generated transient Lamb waves in orthotropic plates , 1996 .

[9]  Y. Berthelot,et al.  Noncontact laser generation and detection of lamb waves in paper , 1996 .

[10]  Red fluorescence sensor for noncontact on-line measurements in paper production , 2001 .

[11]  Gary A. Baum,et al.  Determination of all nine orthotropic elastic constants for machine-made paper , 1979 .

[12]  H. P. Lee,et al.  Comparison of implicit and explicit finite element methods for dynamic problems , 2000 .

[13]  V. Mallapragada,et al.  Optical sensor for noncontact measurement of lignin content in high-speed moving paper surfaces , 2005, IEEE Sensors Journal.

[14]  Pierre H. Brodeur,et al.  Fabry-Perot Laser Ultrasonic Elastic Anisotropy Measurements on a Moving Paper Web , 2000 .

[15]  J. T. Oden,et al.  Models and computational methods for dynamic friction phenomena , 1984 .

[16]  Emmanuel Lafond,et al.  Laser ultrasonic system for online measurement of elastic properties of paper , 2003 .

[17]  William Plowden.  The Compact , 2003 .

[18]  Sören Östlund,et al.  Orthotropic elastic–plastic material model for paper materials , 2003 .

[19]  Z. Zhong.  Finite Element Procedures for Contact-Impact Problems , 1993 .