论文信息 - Modeling and control of a wind-turbine-drive DFIG during grid voltage dips based on DIgSILENT/PowerFactory

Modeling and control of a wind-turbine-drive DFIG during grid voltage dips based on DIgSILENT/PowerFactory

The low voltage ride through (LVRT) capability of DFIG has caused more concern. And for testing requirements of LVRT for DFIG WT, this paper propose control strategies for LVRT of DFIG WTs by injecting reactive power into grid. Reactive power allocation are decided by voltage sag levels. When grid voltage drop to 30%, grid-side converter (GSC) works as a STATCOM. Their maximum limited reactive current expressions are also considered. An active power control strategy is proposed considering the recovery rate requirement of the active power. Furthermore, a novel RMS model is presented based on external characteristics. Simulations on a 2.5MW DFIG wind turbine demonstrate that the output characteristics satisfy requirement of grid code of wind power.

Zaiping Pan | Jixing Qiu

[1] Chao,et al. Reactive Current Allocation and Control Strategies Improvement of Low Voltage Ride Though for Doubly Fed Induction Wind Turbine Generation System , 2012 .

[2] Wang Zhiming. Reactive Power Generation Mechanism & Characteristic of Doubly Fed Variable Speed Constant Frequency Wind Power Generator , 2011 .

[3] Yong Kang,et al. An Improved Low-Voltage Ride-Through Control Strategy of Doubly Fed Induction Generator During Grid Faults , 2011, IEEE Transactions on Power Electronics.

[4] Kit Po Wong,et al. A Comprehensive LVRT Control Strategy for DFIG Wind Turbines With Enhanced Reactive Power Support , 2013, IEEE Transactions on Power Systems.

[5] J. Morren,et al. Ridethrough of wind turbines with doubly-fed induction generator during a voltage dip , 2005, IEEE Transactions on Energy Conversion.

[6] Ehab F. El-Saadany,et al. An improved fault ride-through strategy for doubly fed induction generator-based wind turbines , 2008 .