A low-dissipation, pumpless, gravity-induced flow battery

Redox flow batteries have the potential to provide low-cost energy storage to enable renewable energy technologies such as wind and solar to overcome their inherent intermittency and to improve the efficiency of electric grids. Conventional flow batteries are complex electromechanical systems designed to simultaneously control flow of redox active fluids and perform electrochemical functions. With the advent of redox active fluids with high capacity density, i.e., Faradaic capacity significantly exceeding the 1–2 M concentration equivalents typical of aqueous redox flow batteries, new flow battery designs become of interest. Here, we design and demonstrate a proof-of-concept prototype for a “gravity-induced flow cell” (GIFcell), representing one of a family of approaches to simpler, more robust, passively driven, lower-cost flow battery architectures. Such designs are particularly appropriate for semi-solid electrodes comprising suspensions of networked conductors and/or electroactive particles, due to their low energy dissipation during flow. Accordingly, we demonstrate the GIFcell using nonaqueous lithium polysulfide solutions containing a nanoscale carbon network in a half-flow-cell configuration and achieve round trip energy efficiency as high as 91%.

[1]  P. Coussot,et al.  On the existence of a simple yield stress fluid behavior , 2012, 1209.4325.

[2]  J. Castro,et al.  Microfluidics and rheology of dilute carbon black suspensions for in-mould coating (IMC) applications , 2007 .

[3]  Jason R. Stokes,et al.  Measuring the yield behaviour of structured fluids , 2004 .

[4]  Maria Skyllas-Kazacos,et al.  Progress in Flow Battery Research and Development , 2011 .

[5]  A Low-Cost Mechanically Rechargeable Aluminum–Air Cell for Energy Conversion Using Low-Grade Aluminum Foil , 2016 .

[6]  B. Dunn,et al.  Electrical Energy Storage for the Grid: A Battery of Choices , 2011, Science.

[7]  Jun Liu,et al.  Electrochemical energy storage for green grid. , 2011, Chemical reviews.

[8]  S. Papson,et al.  “Model” , 1981 .

[9]  Howard A. Barnes,et al.  The yield stress—a review or ‘παντα ρει’—everything flows? , 1999 .

[10]  M. Mench,et al.  Redox flow batteries: a review , 2011 .

[11]  A. Yoshimura,et al.  Wall Slip Corrections for Couette and Parallel Disk Viscometers , 1988 .

[12]  J. M. Nóbrega,et al.  Analytical solutions for Newtonian and inelastic non-Newtonian flows with wall slip , 2012 .

[13]  Hans-Jürgen Butt,et al.  Boundary slip in Newtonian liquids: a review of experimental studies , 2005 .

[14]  Kyle C. Smith,et al.  Maximizing Energetic Efficiency in Flow Batteries Utilizing Non-Newtonian Fluids , 2014 .

[15]  Philippe Coussot,et al.  Saffman–Taylor instability in yield-stress fluids , 1999, Journal of Fluid Mechanics.

[16]  Zheng Li,et al.  Electronic Supplementary Information Aqueous Semi-Solid Flow Cell: Demonstration and Analysis , 2013 .

[17]  Y. Couder,et al.  Narrow fingers in the Saffman-Taylor instability. , 1986, Physical review. A, General physics.

[18]  G. G. Stokes "J." , 1890, The New Yale Book of Quotations.

[19]  Hong‐Jie Peng,et al.  Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries , 2014 .

[20]  R. Netz,et al.  Water slippage versus contact angle: a quasiuniversal relationship. , 2008, Physical review letters.

[21]  Zhenguo Yang,et al.  Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries. , 2011, Physical chemistry chemical physics : PCCP.

[22]  Bin Li,et al.  Recent Progress in Redox Flow Battery Research and Development , 2012 .

[23]  Guangyuan Zheng,et al.  Interconnected hollow carbon nanospheres for stable lithium metal anodes. , 2014, Nature nanotechnology.

[24]  Victor E. Brunini,et al.  Semi‐Solid Lithium Rechargeable Flow Battery , 2011 .

[25]  John B. Shoven,et al.  I , Edinburgh Medical and Surgical Journal.

[26]  Kevin G. Gallagher,et al.  Pathways to Low Cost Electrochemical Energy Storage: A Comparison of Aqueous and Nonaqueous Flow Batteries , 2014 .

[27]  Gareth H McKinley,et al.  Polysulfide flow batteries enabled by percolating nanoscale conductor networks. , 2014, Nano letters.

[28]  H. Stone,et al.  Control of interfacial instabilities using flow geometry , 2012, Nature Physics.