Timber-concrete composite bridges: Three case studies

Abstract During the last years, timber-concrete composite (TCC) structures have been extensively used in Europe both in new and existing buildings. Generally speaking, a composite structure combines the advantages of both materials employed: the strength and stiffness of the concrete in compression and the tensile strength, lightweight, low embodied energy, and aesthetical appearance of the timber. The concrete slab provides protection of the timber beams from direct contact with water, which is crucial to ensure the durability of the timber beams, particularly when used for bridges. Different types of connectors can be used to provide force exchange between the concrete slab and the timber beam. The choice of a structurally effective yet cheap shear connection between the concrete topping and the timber joist is crucial to make the TCC structures a viable solution that can compete with reinforced concrete and steel structures. In this paper, the possibilities offered by TCC structures for short-span bridge decks are discussed. The technology of TCC structures and the general design rules are illustrated. Three case studies are reported, including a short-span bridge tested in Colorado, USA, with the timber layer being constructed from recycled utility poles and notch connection; a TCC bridge with glulam beams and triangular notches with epoxy-glued rebar connectors built in Portugal; and a TCC bridge with glulam beams and rectangular notches built in Germany. All the solutions were found to be structurally effective and aesthetically pleasing. They can all provide a sustainable option for short-span bridges.

[1]  Yan Xiao,et al.  Design and Construction of Modern Bamboo Bridges , 2010 .

[2]  John Philip Cook,et al.  Composite Construction Methods , 1977 .

[3]  Miguel Ferreira,et al.  Timber–concrete practical applications – bridge case study , 2011 .

[4]  James P. Wacker,et al.  Investigation of early timber–concrete composite bridges in the United States , 2017 .

[5]  Massimo Fragiacomo,et al.  Influence of Repeated and Sustained Loading on the Performance of Layered Wood–Concrete Composite Beams , 2008 .

[6]  Habib J. Dagher,et al.  Testing and Analysis of Partially Composite Fiber-Reinforced Polymer-Glulam-Concrete Bridge Girders , 2004 .

[7]  Enzo Siviero,et al.  Application of modern timber structure in short and medium span bridges in China , 2014 .

[8]  Hans Joachim Blaß,et al.  Screws with continuous threads in timber connections , 2001 .

[9]  Massimo Fragiacomo,et al.  Development of prefabricated timber–concrete composite floor systems , 2011 .

[10]  Audronis Kazimieras Kvedaras,et al.  Mechanical behaviour of timber‐to‐concrete connections with inclined screws , 2007 .

[11]  F. E. Richart,et al.  Tests of Composite Timber-Concrete Beams , 1943 .

[12]  H. Blass,et al.  Joints with inclined screws , 2002 .

[13]  Michael A. Ritter,et al.  Timber Bridges: Design, Construction, Inspection, and Maintenance , 1990 .

[14]  Wenhui Xie,et al.  The Review and Proposals of Wood-concrete Composite Beams , 2016 .

[15]  T. Toratti.  Creep of Timber Beams in a Variable Environment , 1992 .

[16]  Massimo Fragiacomo,et al.  Composite Wood-Concrete Beams Using Utility Poles: Time-Dependent Behavior , 2011 .

[17]  Massimo Fragiacomo,et al.  Proposal to Account for Concrete Shrinkage and Environmental Strains in Design of Timber-Concrete Composite Beams , 2013 .

[18]  Roberto Tomasi,et al.  Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws , 2010 .

[19]  Massimo Fragiacomo,et al.  Mechanical behavior of timber–concrete connections with inclined screws , 2017 .

[20]  Massimo Fragiacomo,et al.  Long-Term Behavior of Wood-Concrete Composite Floor/Deck Systems with Shear Key Connection Detail , 2007 .

[21]  Massimo Fragiacomo.  Long-Term Behavior of Timber–Concrete Composite Beams. II: Numerical Analysis and Simplified Evaluation , 2006 .

[22]  Pj Yttrup.  Concrete Enhanced Timber , 1996 .

[23]  David Yeoh,et al.  Preliminary Research Towards A Semi-Prefabricated LVL– Concrete Composite Floor System for the Australasian Market , 2009 .