A review on belt and chain continuously variable transmissions (CVT): Dynamics and control

Over the last two decades, significant research effort has been directed towards developing vehicle transmissions that reduce the energy consumption of an automobile. This effort has been a direct consequence of the growing environmental concern imposing the directives of reduced exhaust emissions and increased vehicle efficiency on current vehicle manufacturers and users. A continuously variable transmission (CVT) offers a continuum of gear ratios between desired limits, which consequently enhances the fuel economy and dynamic performance of a vehicle by better matching the engine operating conditions to the variable driving scenarios. Although a CVT plays a crucial role in the plan to improve vehicle fuel economy, its complete potential has not been realized in a mass-production vehicle. The current paper reviews the state-of-the-art research on dynamic modeling and control of friction-limited continuously variable transmissions. The basic concepts, mathematical models, and computational schemes are extensively discussed. Challenges and critical issues for future research on modeling and control of such CVTs are also discussed.

[1]  R. Watts,et al.  CVT lubrication: The effect of lubricants on the frictional characteristics of the belt‐pulley interface , 1999 .

[2]  Martin Priest,et al.  Metal-metal friction characteristics and the transmission efficiency of a metal V-belt-type continuously variable transmission , 2007 .

[3]  Nilabh Srivastava,et al.  On the operating regime of a metal pushing V- belt CVT under steady state microslip conditions , 2004 .

[4]  M Maarten Steinbuch,et al.  Control of a hydraulically actuated continuously variable transmission , 2006 .

[5]  Nilabh Srivastava,et al.  Transient dynamics of metal V-belt CVT : Effects of band pack slip and friction characteristic , 2008 .

[6]  Friedrich Pfeiffer,et al.  Elastic Modelling of Bodies and Contacts in Continuous Variable Transmissions , 2005 .

[7]  Friedrich Pfeiffer,et al.  Dynamics of high speed roller chain drives , 1996 .

[8]  Kazuya Okubo,et al.  Shifting Mechanisms and Variation of Frictional Coefficients for CVT Using Metal Pushing V-Belts , 2000 .

[9]  J.M. Miller,et al.  Hybrid electric vehicle propulsion system architectures of the e-CVT type , 2006, IEEE Transactions on Power Electronics.

[10]  Lino Guzzella,et al.  Feedback linearization of spark-ignition engines with continuously variable transmissions , 1995, IEEE Trans. Control. Syst. Technol..

[11]  Michael A. Kluger,et al.  An Overview of Current CVT Mechanisms, Forces and Efficiencies , 1997 .

[12]  Friedrich Pfeiffer,et al.  Dynamics of CVT chain drives , 1999 .

[13]  Toru Fujii,et al.  A Study on a Metal Pushing V-Belt Type CVT (Part 3: What Forces Act on Metal Blocks?) , 1994 .

[14]  Peter Tenberge.  Efficiency of Chain-CVTs at Constant and Variable Ratio - A new mathematical model for a very fast calculation of chain forces, clamping forces, clamping ratio, slip, and efficiency , 2004 .

[15]  Yasuhiro Murakami,et al.  The Effect of Belt-Drive CVT Fluid on the Friction Coefficient Between Metal Components , 1997 .

[16]  Kazuaki Sakai,et al.  Research of hydrostatic CVT for passenger vehicles , 2003 .

[17]  Friedrich Pfeiffer,et al.  An Elastic Model of a Metal V-Belt CVT , 2002 .

[18]  P. A. Veenhuizen,et al.  CVT dynamics : theory and experiments , 2007 .

[19]  Nicola Pio Belfiore,et al.  BALL TOROIDAL CVT: A FEASIBILITY STUDY BASED ON TOPOLOGY, KINEMATICS, STATICS AND LUBRICATION. , 2003 .

[20]  Toru Fujii,et al.  A Study on a Metal Pushing V-Belt Type CVT (Part 4: Forces Act on Metal Blocks when the Speed Ratio is Changing) , 1995 .

[21]  Francesco Sorge.  Transient Mechanics of V-Belt Variators , 2004 .

[22]  David L. Greene,et al.  Reducing Greenhouse Gas Emissions from U.S. Transportation , 2003 .

[23]  T. Ide,et al.  SIMULATION APPROACH TO THE EFFECT OF THE RATIO CHANGING SPEED OF A METAL V- BELT CVT ON THE VEHICLE RESPONSE , 1995 .

[24]  Hyunsoo Kim,et al.  Model based control for a pressure control type CVT , 2005 .

[25]  Hyunsoo Kim,et al.  Analysis of belt behavior and slip characteristics for a metal V-belt CVT , 1994 .

[26]  D. C. Sun.  Performance Analysis of a Variable Speed-Ratio Metal V-Belt Drive , 1988 .

[27]  Anna G. Stefanopoulou,et al.  Effects of control structure on performance for an automotive powertrain with a continuously variable transmission , 2002, IEEE Trans. Control. Syst. Technol..

[28]  Ben Cowan,et al.  A Continuously Variable Power Split Transmission for Automotive Applications , 1997 .

[29]  Nilabh Srivastava,et al.  Clearance and friction-induced dynamics of chain CVT drives , 2008 .

[30]  Takeshi Takiyama.  Engine-CVT-A/F consolidated control using decoupling control theory , 2001 .

[31]  Hyunsoo Kim,et al.  HARDWARE IN THE LOOP SIMULATION OF HYBRID VEHICLE FOR OPTIMAL ENGINE OPERATION BY CVT RATIO CONTROL , 2004 .

[32]  Shinichi Sakaguchi,et al.  Development of an Engine-CVT Integrated Control System , 1999 .

[33]  G. Stavroulakis.  Multibody Dynamics with Unilateral Contacts by Friedrich Pfeiffer and Christoph Glocker, Wiley, New York, 1996 , 1998 .

[34]  Hirohisa Tanaka.  Torque control of a double cavity half-toroidal CVT , 2003 .

[35]  Lino Guzzella,et al.  A Control-Oriented CVT Model With Nonzero Belt Mass , 2002 .

[36]  Di Yang,et al.  Control and Response of Continuously Variable Transmission (CVT) Vehicles , 1985, 1985 American Control Conference.

[37]  Piyoros Jirawattana,et al.  Optimal operation and control of a hydrostatic CVT powertrain , 2005 .

[38]  N. Srivastava,et al.  Influence of friction characteristic on the performance of chain CVT drives , 2006 .

[39]  Toru Fujii,et al.  A Study of a Metal Pushing V-Belt Type CVT-Part 2: Compression Force Between Metal Blocks and Ring Tension , 1993 .

[40]  Friedrich Pfeiffer,et al.  State-of-the-Art of CVT-Modelling , 2004 .

[41]  Giacomo Mantriota.  Fuel consumption of a vehicle with power split CVT system , 2005 .

[42]  Martin Sedlmayr,et al.  Force reduction in CVT chains , 2002 .

[43]  Nilabh Srivastava,et al.  Influence of Clearance on the Dynamics of Chain CVT Drives , 2006 .

[44]  Masaaki Uchida,et al.  An Integrated Control Algorithm for an SI Engine and a CVT , 1999 .

[45]  Giuseppe Carbone,et al.  Theoretical Model of Metal V-Belt Drives During Rapid Ratio Changing , 2001 .

[46]  Brad Paden,et al.  A survey of today's CVT controls , 1997, Proceedings of the 36th IEEE Conference on Decision and Control.

[47]  Pier Paolo Valentini,et al.  Dynamic Simulation of a Metal Belt CVT Under Transient Conditions , 2002 .

[48]  Nader Sadegh,et al.  Model identification and backstepping control of a continuously variable transmission system , 2001, Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148).

[49]  Nilabh Srivastava,et al.  On the transient dynamics of a metal pushing V-belt CVT at high speeds , 2005 .

[50]  Friedrich Pfeiffer,et al.  Spatial Dynamics of CVT Chain Drives , 2002 .

[51]  Heinz Ulbrich,et al.  Analysis of Self-induced Vibrations in a Pushing V-belt CVT , 2004 .

[52]  Hiroki Asayama,et al.  Mechanism of metal pushing belt , 1995 .

[53]  Jungyun Kim,et al.  Design and Analysis of a Spherical Continuously Variable Transmission , 2002 .

[54]  J. P. Dolan,et al.  Closed-Form Approximations to the Solution of V-Belt Force and Slip Equations , 1985 .

[55]  Yutaka Mabuchi,et al.  A STUDY ON THE TORQUE CAPACITY OF A METAL PUSHING V-BELT FOR CVTS , 1998 .

[56]  Ben Cowan,et al.  Design of continuously variable power split transmission systems for automotive applications , 2001 .

[57]  T Kim,et al.  Performance of integrated engine-CVT control considering powertrain loss and CVT response lag , 2002 .

[58]  Francesco Sorge.  Variational approach to the mechanics of metal V-belt systems , 2005 .

[59]  K.J. Astrom,et al.  Dynamic Friction Models and Control Design , 1993, 1993 American Control Conference.

[60]  G. Gerbert.  Belt slip : A unified approach , 1996 .

[61]  M. Steinbuch,et al.  Implementation of a slip controlled CVT in a production vehicle , 2005, Proceedings of 2005 IEEE Conference on Control Applications, 2005. CCA 2005..

[62]  Sam Akehurst,et al.  CVT Rolling Traction Drives—A Review of Research Into Their Design, Functionality, and Modeling , 2006 .

[63]  Hans P. Geering,et al.  Model of a Continuously Variable Transmission , 1995 .

[64]  D K Longmore,et al.  Modelling of the Steel Pushing V-Belt Continuously Variable Transmission , 1994 .

[65]  Giacomo Mantriota,et al.  Theoretical and experimental study of a power split continuously variable transmission system Part 1 , 2001 .

[66]  T. S. Sankar,et al.  Vibro-Impact Analysis of Control Systems With Mechanical Clearance and Its Application to Robotic Actuators , 1986 .

[67]  Nilabh Srivastava,et al.  Using Genetic Algorithms to Identify Initial Operating Conditions for a Transient CVT Model , 2004 .

[68]  Satish S. Nair,et al.  A Mathematical Review and Comparison of Continuously Variable Transmissions , 1992 .

[69]  Toru Fujii,et al.  Power Transmitting Mechanisms of CVT Using a Metal V-Belt and Load Distribution in the Steel Ring , 1998 .

[70]  Alan D. Lewis,et al.  Development of a simulation technique for CVT metal pushing V-belt with feedback control , 2004 .

[71]  Nilabh Srivastava,et al.  Dynamics of Chain CVT Drives: Effects of Friction Characteristic , 2007 .

[72]  Jaeshin Yi,et al.  Ratio Control of Metal Belt CVT , 2000 .

[73]  Nilabh Srivastava,et al.  Transient Dynamics of the Metal V-Belt CVT: Effects of Pulley Flexibility and Friction Characteristic , 2007 .

[74]  Yasuhito Sakai.  The “ECVT” Electro Continuously Variable Transmission , 1988 .

[75]  Kimio Kanai,et al.  Development Of Cvt Control System And Its Use For Fuel-Efficient Operation Of Engine , 2008 .

[76]  Le Yi Wang,et al.  Coordinated control of lean burn gasoline engines with continuously variable transmissions , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[77]  Giuseppe Carbone,et al.  The Influence of Pulley Deformations on the Shifting Mechanism of Metal Belt CVT , 2005 .

[78]  Francesco Sorge,et al.  Full Sliding Adhesive-Like Contact of V-Belts , 2002 .

[79]  H Lee,et al.  Improvement of fuel economy by shift speed control for a metal belt continuously variable transmission , 2002 .

[80]  K. Narita,et al.  The influence of lubricating oil on the performance of a metal V‐belt‐type continuously variable transmission , 2004 .

[81]  D K Longmore,et al.  Belt Torque Loss in a Steel V-Belt Continuously Variable Transmission , 1994 .

[82]  M Maarten Steinbuch,et al.  Performance optimisation of the push-belt CVT by variator slip control , 2005 .

[83]  Rolf Pfiffner.  Optimal operation of CVT-based powertrains , 2001 .

[84]  Mark Van Drogen,et al.  Improving Push Belt CVT Efficiency by Control Strategies Based on New Variator Wear Insight , 2004 .

[85]  Kazuya Okubo,et al.  A Study on a Metal Pushing V-belt type CVT - A Novel Approach to Characterize the Friction Between Blocks and a Pulley, and Shifting Mechanisms , 2002 .

[86]  Friedrich Pfeiffer,et al.  Spatial Contact Mechanics of CVT Chain Drives , 2001 .

[87]  Friedrich Pfeiffer.  Spatial Motion of CVT-Chains , 2005 .

[88]  Friedrich Pfeiffer,et al.  Multibody Dynamics with Unilateral Contacts , 1996 .

[89]  Nilabh Srivastava,et al.  Nonlinear dynamics of a friction-limited drive: Application to a chain continuously variable transmission (CVT) system , 2009 .

[90]  J. N. Fawcett.  Chain and Belt Drives - A Review , 1981 .

[91]  Giuseppe Carbone,et al.  EHL visco-plastic friction model in CVT shifting behaviour , 2003 .

[92]  Robert G. Parker,et al.  Steady mechanics of layered, multi-band belt drives used in continuously variable transmissions (CVT) , 2008 .

[93]  Sam Akehurst.  An investigation in to the Loss Mechanisms Associated with a Pushing Metal V-Belt Continuously Variable Transmission , 2001 .

[94]  Christopher H. Onder,et al.  FUEL-OPTIMAL CONTROL OF CVT POWERTRAINS , 2001 .

[95]  John R. Wagner,et al.  Nonlinear control of a continuously variable transmission (CVT) , 2003, IEEE Trans. Control. Syst. Technol..

[96]  Giacomo Mantriota,et al.  Influence of Clearance Between Plates in Metal Pushing V-Belt Dynamics , 2002 .

[97]  Francesco Sorge.  A Qualitative-Quantitative Approach to V-Belt Mechanics , 1996 .

[98]  Toru Fujii,et al.  A Numerical Approach to Analyze the Power Transmitting Mechanisms of a Metal Pushing V-Belt Type CVT , 1996 .

[99]  Michael A. Kluger,et al.  An Overview of Current Automatic, Manual and Continuously Variable Transmission Efficiencies and Their Projected Future Improvements , 1999 .

[100]  M Maarten Steinbuch,et al.  Analysis of Slip in a Continuously Variable Transmission , 2003 .