Control of a post-combustion CO2 capture plant during process start-up and load variations

Abstract Dynamic and flexible operation of a carbon capture plant is important as thermal power plants must be operated very flexibly to accommodate large shares of intermittent energy sources such as wind and solar energy. To facilitate such operation, dynamic models for simulation, optimization and control system design are crucial. In this paper, we present a dynamic mathematical model for the absorption and desorption columns in a carbon capture plant. Moreover, we implement a decentralized proportional-integral (PI) based control scheme and we evaluate the performance of the control structure for various operational procedures, e.g. start-up, load changes, noise on the flue gas flow rate and composition. Note that the carbon capture plant is based on the solvent storage configuration. To the authors knowledge, this is the first paper addressing the issue of start-up operation and control of carbon capture. The study demonstrates that the implemented control structure keeps the carbon capture process at 90% CO 2 removal rate with a deviation up to 8% during load variations. In addition, it reveals that the control structure brings the process to the desired set point in approximately 10 min during process start-up.

[1]  Sigurd Skogestad,et al.  Simple analytic rules for model reduction and PID controller tuning , 2003 .

[2]  Luis A. Ricardez-Sandoval,et al.  Controllability and optimal scheduling of a CO2 capture plant using model predictive control , 2014 .

[3]  J. Prausnitz,et al.  Statistical thermodynamics of liquid mixtures: A new expression for the excess Gibbs energy of partly or completely miscible systems , 1975 .

[4]  Jozsef Gaspar,et al.  Solid formation in piperazine rate-based simulation , 2014 .

[5]  Kaj Thomsen.  Modeling electrolyte solutions with the extended universal quasichemical (UNIQUAC) model , 2005 .

[6]  Sigurd Skogestad,et al.  Economically efficient operation of CO2 capturing process. Part II. Design of control layer , 2012 .

[7]  Chechet Biliyok,et al.  Dynamic modelling, validation and analysis of post-combustion chemical absorption CO2 capture plant , 2012 .

[8]  H. M. Kvamsdal,et al.  Dynamic modeling and simulation of a CO2 absorber column for post-combustion CO2 capture , 2009 .

[9]  Eric Croiset,et al.  Dynamic simulation of MEA absorption process for CO2 capture from power plants , 2012 .

[10]  Rafiqul Gani,et al.  Correlation and prediction of thermal properties and phase behaviour for a class of aqueous electrolyte systems , 1996 .

[11]  H. Yeung,et al.  Dynamic modelling and analysis of post-combustion CO2 chemical absorption process for coal-fired power plants , 2010 .

[12]  Kaj Thomsen,et al.  Modeling of vapor-liquid-solid equilibrium in gas - aqueous electrolyte systems , 1999 .

[13]  James R. Fair,et al.  Distillation columns containing structured packings: a comprehensive model for their performance. 1. Hydraulic models , 1993 .

[14]  Eric Croiset,et al.  Dynamic modelling and control of MEA absorption processes for CO2 capture from power plants , 2014 .

[15]  David Shan-Hill Wong,et al.  Plantwide control of CO2 capture by absorption and stripping using monoethanolamine solution , 2011, Proceedings of the 2011 American Control Conference.

[16]  Nilay Shah,et al.  Optimisation of Post-combustion CO2 Capture for Flexible Operation , 2014 .

[17]  James R. Fair,et al.  Distillation Columns Containing Structured Packings: A Comprehensive Model for Their Performance. 2. Mass-Transfer Model , 1996 .

[18]  Ana-Maria Cormos,et al.  Dynamic modeling and validation of absorber and desorber columns for post-combustion CO2 capture , 2011, Comput. Chem. Eng..