Post-Earthquake Assessment of Reinforced Concrete Frames

[1]  Jonathan P. Stewart,et al.  An Assessment to Benchmark the Seismic Performance of a Code-Conforming Reinforced-Concrete Moment-Frame Building , 2008 .

[2]  E. Miranda,et al.  Residual displacement ratios for assessment of existing structures , 2006 .

[3]  John B. Mander,et al.  Seismic Resistance of Reinforced Concrete Frame Structures Designed Only for Gravity Loads - Part I: Design and Properties of a 1/3 Scale Model Structure , 1992 .

[4]  Matthew Ronald LeBorgne,et al.  Modeling the post shear failure behavior of reinforced concrete columns , 2012 .

[5]  M. Menegotto.  Method of Analysis for Cyclically Loaded R. C. Plane Frames Including Changes in Geometry and Non-Elastic Behavior of Elements under Combined Normal Force and Bending , 1973 .

[6]  Filip C. Filippou,et al.  Evaluation of Nonlinear Frame Finite-Element Models , 1997 .

[7]  Murat Saatcioglu,et al.  Strength and Ductility of Confined Concrete , 1992 .

[8]  Dawn E. Lehman,et al.  Linear Analysis of Concrete Frames Considering Joint Flexibility , 2012 .

[9]  José A. Pincheira,et al.  INFLUENCE OF MODELING PARAMETERS AND ASSUMPTIONS ON THE SEISMIC RESPONSE OF AN EXISTING RC BUILDING , 2002 .

[10]  Yi-Lung Mo,et al.  Seismic Behavior of RC Columns with Various Tie Configurations , 2000 .

[11]  Enrico Spacone,et al.  Localization Issues in Force-Based Frame Elements , 2001 .

[12]  Reginald DesRoches,et al.  Analytical Fragility Curves for Multispan Continuous Steel Girder Bridges in Moderate Seismic Zones , 2010 .

[13]  Ahmet Yakut,et al.  Preliminary seismic performance assessment procedure for existing RC buildings , 2004 .

[14]  Kenneth J. Elwood,et al.  Modelling failures in existing reinforced concrete columns , 2004 .

[15]  A. J. Durrani,et al.  Equivalent Beam Model for Flat-Slab Buildings--Part II: Exterior Connections , 1995 .

[16]  S. Kunnath,et al.  Modeling Inelastic Shear Deformation in RC Beam-Column Joints , 1995 .

[17]  John F. Stanton,et al.  A cyclic shear stress-strain model for joints without transverse reinforcement , 2008 .

[18]  James C. Anderson,et al.  Models for RC Frames with Degrading Stiffness , 1977 .

[19]  Laura N. Lowes,et al.  Fragility Functions for Modern Reinforced-Concrete Beam-Column Joints , 2007 .

[20]  Bruce Ellingwood,et al.  Development of a probability based load criterion for American National Standard A58 , 1980 .

[21]  Michael H. Scott,et al.  Plastic Hinge Integration Methods for Force-Based Beam¿Column Elements , 2006 .

[22]  Jack P. Moehle,et al.  Seismic Evaluation of Existing Reinforced Concrete Building Columns , 1996 .

[23]  Oguzhan Bayrak,et al.  Seismic performance of full-scale reinforced concrete columns , 2008 .

[24]  E. Miranda,et al.  Probabilistic estimation of residual drift demands for seismic assessment of multi-story framed buildings , 2010 .

[25]  Marc O. Eberhard,et al.  Practical performance model for bar buckling , 2005 .

[26]  Reginald DesRoches,et al.  Seismic fragility methodology for highway bridges using a component level approach , 2006 .

[27]  J. Mander,et al.  Theoretical stress strain model for confined concrete , 1988 .

[28]  Soumya K Ghosh,et al.  Flexural Stiffness of Reinforced Concrete Columns and Beams: Analytical Approach , 2004 .

[29]  Robert E. Bachman,et al.  Creating Fragility Functions for Performance-Based Earthquake Engineering , 2007 .

[30]  M. Priestley,et al.  Ductility of Square-Confined Concrete Columns , 1982 .

[31]  Alessandra Marini,et al.  Analysis of Reinforced Concrete Elements Including Shear Effects , 2006 .

[32]  S. Otani.  Inelastic Analysis of R/C Frame Structures , 1974 .

[33]  Curt B. Haselton,et al.  Assessing seismic collapse safety of modern reinforced concrete moment frame buildings , 2006 .

[34]  J. P. Ulfkjær,et al.  Rotational Capacity of Reinforced Concrete Beams , 1995 .

[35]  Eduardo Miranda,et al.  Evaluation of residual drift demands in regular multi‐storey frames for performance‐based seismic assessment , 2006 .

[36]  David A. Pecknold.  Slab Effective Width for Eqivalent Frame Analysis , 1975 .

[37]  B. Stojadinović,et al.  RESIDUAL DISPLACEMENT AND POST EARTHQUAKE CAPACITY OF HIGHWAY BRIDGES , 2002 .

[38]  John B. Mander,et al.  Seismic Resistance of Reinforced Concrete Frame Structures Designed Only for Gravity Loads: Experimental Performance of Subassemblages , 1994 .

[39]  Jack P. Moehle,et al.  Models for Laterally Loaded Slab-Column Frames , 2000 .

[40]  Frederic Legeron,et al.  INFLUENCE OF CONCRETE STRENGTH AND TRANSVERSE REINFORCEMENT YIELD STRENGTH ON BEHAVIOR OF HIGH-STRENGTH CONCRETE COLUMNS , 2001 .

[41]  R. Park,et al.  Flexural Members with Confined Concrete , 1971 .

[42]  Jack P. Moehle,et al.  Axial Capacity Model for Shear-Damaged Columns , 2005 .

[43]  Nicolas Luco,et al.  A methodology for post-mainshock probabilistic assessment of building collapse risk , 2011 .

[44]  Laura N. Lowes,et al.  Evaluation, calibration, and verification of a reinforced concrete beam-column joint model , 2007 .

[45]  S. Popovics.  A numerical approach to the complete stress-strain curve of concrete , 1973 .

[46]  Mjn Priestley,et al.  STRENGTH AND DUCTILITY OF CONCRETE BRIDGE COLUMNS UNDER SEISMIC LOADING , 1987 .

[47]  P. Bazzurro,et al.  DYNAMIC VERSUS STATIC COMPUTATION OF THE RESIDUAL CAPACITY OF A MAINSHOCK-DAMAGED BUILDING TO WITHSTAND AN AFTERSHOCK , 2002 .

[48]  M T Soesianawati,et al.  LIMITED DUCTILITY DESIGN OF REINFORCED CONCRETE COLUMNS , 1986 .

[49]  Abbie B. Liel,et al.  Assessing the collapse risk of California's existing reinforced concrete frame structures: Metrics for seismic safety decisions , 2008 .

[50]  Modelling the Earthquake Response of Older Reinforced Concrete Beam-Column Building Joints , 2004 .

[51]  James O. Jirsa,et al.  Behavior of concrete under compressive loadings , 1969 .

[52]  A. Dazio,et al.  UTILIZATION OF RESIDUAL DISPLACEMENTS IN THE POST-EAR HQUAKE ASSESSMENT , 2008 .

[53]  Robert E. Melchers,et al.  Structural Reliability: Analysis and Prediction , 1987 .

[54]  L. Lowes,et al.  A Beam-Column Joint Model for Simulating the Earthquake Response of Reinforced Concrete Frames , 2004 .

[55]  M. Eberhard,et al.  The MW 7.0 Haiti Earthquake of January 12, 2010: USGS/EERI Advance Reconnaissance Team Report , 2010 .

[56]  N. Luco,et al.  Developing fragilities for mainshock-damaged structures through incremental dynamic analysis , 2011 .

[57]  L. Lowes,et al.  Fragility Functions for Older Reinforced Concrete Beam-Column Joints , 2006 .

[58]  Jose´A. Pincheira,et al.  Seismic Analysis of Older Reinforced Concrete Columns , 1999 .

[59]  Murat Saatcioglu,et al.  Confinement of Reinforced Concrete Columns with Welded Reinforced Grids , 1999 .

[60]  M. Eberhard,et al.  Effective Stiffness of Reinforced Concrete Columns , 2009 .

[61]  Alan H. Mattock,et al.  Rotational Capacity of Hinging Regions in Reinforced Concrete Beams , 1965 .

[62]  Jack P. Moehle,et al.  Drift Capacity of Reinforced Concrete Columns with Light Transverse Reinforcement , 2005 .

[63]  Ozan Cem Celik,et al.  Probabilistic assessment of non-ductile reinforced concrete frames susceptible to mid-America ground motions , 2007 .

[64]  STEFANO PAMPANIN,et al.  PERFORMANCE-BASED SEISMIC RESPONSE OF FRAME STRUCTURES INCLUDING RESIDUAL DEFORMATIONS. PART II: MULTI-DEGREE OF FREEDOM SYSTEMS , 2003 .