Transformer less Intelligent Power Substation design with 15kV SiC IGBT for grid interconnection

Basic power topology for a Solid State Transformer (SST) with new 15kV SiC IGBT devices is discussed. It is difficult to build high efficient, light weight, magnetically isolated solid state transformer for high voltage (13.8 kV) grid connectivity with existing Si 6.5kV rated IGBTs and diodes. Existing state of the art high voltage (6.5kV), high speed power devices (IGBT) cause considerable amount of loss (switching and conduction loss). With the advent of SiC devices these limitations are largely mitigated and this provides the motivation for new power topologies. The targeted efficiency of the proposed SST is 98%.Simulation results for a 1 MVA proposed SST topology is presented.

[1]  H. A. Nienhaus,et al.  A solid state transformer , 1980, 1980 IEEE Power Electronics Specialists Conference.

[2]  D.M. Divan,et al.  A three-phase soft-switched high power density DC/DC converter for high power applications , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[3]  I. Barbi,et al.  An improved family of ZVS-PWM active-clamping DC-to-DC converters , 1998 .

[4]  T. Chow,et al.  A comparative evaluation of new silicon carbide diodes and state-of-the-art silicon diodes for power electronic applications , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[5]  Fang Zheng Peng Z-source inverter , 2002 .

[6]  S. D. Sudhoff,et al.  A Power Electronic-Based Distribution Transformer , 2002, IEEE Power Engineering Review.

[7]  F.Z. Peng,et al.  Maximum boost control of the Z-source inverter , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[8]  Chien-Ming Wang A novel single-stage full-bridge buck-boost inverter , 2004 .

[9]  Rong-Jong Wai,et al.  High-efficiency fuel-cell power inverter with soft-switching resonant technique , 2005 .

[10]  Jih-Sheng Lai,et al.  Multilevel intelligent universal transformer for medium voltage applications , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[11]  Jin Wang,et al.  Constant boost control of the Z-source inverter to minimize current ripple and voltage stress , 2006, IEEE Transactions on Industry Applications.

[12]  Frede Blaabjerg,et al.  Topological Development and Operational Analysis of Buck-Boost Current Source Inverters for Energy Conversion Applications , 2006 .

[13]  Jun Wang,et al.  270 kVA Solid State Transformer Based on 10 kV SiC Power Devices , 2007, 2007 IEEE Electric Ship Technologies Symposium.

[14]  Rong-Jong Wai,et al.  High-Performance Stand-Alone Photovoltaic Generation System , 2008, IEEE Transactions on Industrial Electronics.

[15]  Fang Zheng Peng,et al.  Dead-Time Elimination for Voltage Source Inverters , 2008, IEEE Transactions on Power Electronics.

[16]  Xu Yang,et al.  An isolated single stage buck-boost inverter , 2008, 2008 IEEE Power Electronics Specialists Conference.

[17]  Ryszard Strzelecki,et al.  New type T-Source inverter , 2009, 2009 Compatibility and Power Electronics.

[18]  S. H. Hosseini,et al.  Single stage single phase series-grid connected PV system for voltage compensation and power supply , 2009, 2009 IEEE Power & Energy Society General Meeting.

[19]  Jung-Min Kwon,et al.  High Step-Up Active-Clamp Converter With Input-Current Doubler and Output-Voltage Doubler for Fuel Cell Power Systems , 2009 .

[20]  Yao-Ching Hsieh,et al.  An Interleaved Boost Converter With Zero-Voltage Transition , 2009, IEEE Transactions on Power Electronics.

[21]  Toit Mouton,et al.  Solid-state transformer topology selection , 2009, 2009 IEEE International Conference on Industrial Technology.

[22]  Yi Zhao,et al.  Design and Analysis of a Grid-Connected Photovoltaic Power System , 2010, IEEE Transactions on Power Electronics.

[23]  Zhengyu Lu,et al.  An Interleaved Totem-Pole Boost Bridgeless Rectifier With Reduced Reverse-Recovery Problems For Power Factor Correction , 2010, IEEE Transactions on Power Electronics.

[24]  T. Lipo,et al.  A novel topology of solid state transformer , 2010, 2010 1st Power Electronic & Drive Systems & Technologies Conference (PEDSTC).

[25]  Subhashish Bhattacharya,et al.  Design considerations of high voltage and high frequency transformer for solid state transformer application , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[26]  Fang Lin Luo,et al.  Switched Inductor Z-Source Inverter , 2010, IEEE Transactions on Power Electronics.

[27]  Alex Q. Huang,et al.  Voltage and power balance control for a cascaded multilevel solid state transformer , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[28]  Seon-Hwan Hwang,et al.  Dead Time Compensation Method for Voltage-Fed PWM Inverter , 2010, IEEE Transactions on Energy Conversion.

[29]  Minh-Khai Nguyen,et al.  Switched-Inductor Quasi-Z-Source Inverter , 2011, IEEE Transactions on Power Electronics.

[30]  Hao Yuan,et al.  Research on voltage and power balance control for cascaded modular solid-state transformer , 2011, IEEE Transactions on Power Electronics.

[31]  Srdjan Lukic,et al.  Performance evaluation of solid state transformer based microgrid in FREEDM systems , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[32]  Wei Qian,et al.  Trans-Z-Source Inverters , 2010, IEEE Transactions on Power Electronics.