Effect of the polymer emission on the electroluminescence characteristics of n-ZnO nanorods/p-polymer hybrid light emitting diode

Hybrid light emitting diodes (LEDs) based on zinc oxide (ZnO) nanorods and polymers (single and blended) were fabricated and characterized. The ZnO nanorods were grown by the chemical bath deposition method at 50°C. Three different LEDs, with blue emitting, orange-red emitting or their blended polymer together with ZnO nanorods, were fabricated and studied. The current–voltage characteristics show good diode behavior with an ideality factor in the range of 2.1 to 2.27 for all three devices. The electroluminescence spectrum (EL) of the blended device has an emission range from 450 nm to 750 nm, due to the intermixing of the blue emission generated by poly(9,9-dioctylfluorene) denoted as PFO with orange-red emission produced by poly(2-methoxy-5(20-ethyl-hexyloxy)-1,4-phenylenevinylene) 1,4-phenylenevinylene) symbolized as MEH PPV combined with the deep-band emission (DBE) of the ZnO nanorods, i.e. it covers the whole visible region and is manifested as white light. The CIE color coordinates showed bluish, orange-red and white emission from the PFO, MEH PPV and blended LEDs with ZnO nanorods, respectively. These results indicate that the choice of the polymer with proper concentration is critical to the emitted color in ZnO nanorods/p-organic polymer LEDs and careful design should be considered to obtain intrinsic white light sources.

[1]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[2]  H. Shim,et al.  Energy Transfer in a Blend of Electroluminescent Conjugated Polymers , 1996 .

[3]  James J. O'Brien,et al.  Progress with Light‐Emitting Polymers , 2000 .

[4]  Andrew G. Glen,et al.  APPL , 2001 .

[5]  Yang Yang,et al.  Improving the performance of polymer light-emitting diodes using polymer solid solutions , 2001 .

[6]  Ellen Moons,et al.  Conjugated polymer blends: linking film morphology to performance of light emitting diodes and photodiodes , 2002 .

[7]  Shih‐Chang Lin,et al.  Efficient white light emission in conjugated polymer homojunctions , 2004 .

[8]  H. Morkoç,et al.  A COMPREHENSIVE REVIEW OF ZNO MATERIALS AND DEVICES , 2005 .

[9]  G. Padmanaban,et al.  Tuning Polymer Light-Emitting Device Emission Colors in Ternary Blends Composed of Conjugated and Nonconjugated Polymers , 2005 .

[10]  Excellent uniaxial alignment of poly(9,9-dioctylfluorenyl-2,7-diyl) induced by photoaligned polyimide films , 2005 .

[11]  Gang Li,et al.  Achieving High‐Efficiency Polymer White‐Light‐Emitting Devices , 2006 .

[12]  Tingcheng Li,et al.  Optimization of opto‐electronic property and device efficiency of polyfluorenes by tuning structure and morphology , 2006 .

[13]  Yu Hang Leung,et al.  Optical properties of ZnO nanostructures. , 2006, Small.

[14]  R. Mallavia,et al.  On the Origin of Green Emission Bands in Fluorene‐Based Conjugated Polymers , 2007 .

[15]  T. Kerdcharoen,et al.  Chain organization and photophysics of conjugated polymer in poor solvents: Aggregates, agglomerates and collapsed coils , 2007 .

[16]  Y. Xi,et al.  ZnO nanorod heterojunctions and LEDs , 2008, 2008 2nd IEEE International Nanoelectronics Conference.

[17]  D. Basak,et al.  ZnO/polyaniline based inorganic/organic hybrid structure: Electrical and photoconductivity properties , 2008 .

[18]  Chun-Wei Chen,et al.  Near-ultraviolet photodetector based on hybrid polymer/zinc oxide nanorods by low-temperature solution processes , 2008 .

[19]  A. Heeger,et al.  Electron injection into organic semiconductor devices from high work function cathodes , 2008, Proceedings of the National Academy of Sciences.

[20]  Dong Chan Kim,et al.  Erratum: “A comparative analysis of deep level emission in ZnO layers deposited by various methods” [J. Appl. Phys. 105, 013502 (2009)] , 2009 .

[21]  Neil C. Greenham,et al.  Conjugated‐Polymer Blends for Optoelectronics , 2009 .

[22]  Dong Chan Kim,et al.  A comparative analysis of deep level emission in ZnO layers deposited by various methods , 2009 .

[23]  Paul E. Shaw,et al.  Fluorescence Quenchers in Mixed Phase Polyfluorene Films , 2010 .

[24]  Deposition of Well-Aligned ZnO Nanorods at 50 °C on Metal, Semiconducting Polymer, and Copper Oxides Substrates and Their Structural and Optical Properties , 2010 .

[25]  T. Wen,et al.  Color-Tunable Polymer Light-Emitting Diodes with Conjugated Polymer Homojunctions , 2009 .

[26]  S. Zaman,et al.  ZnO-organic hybrid white light emitting diodes grown on flexible plastic using low temperature aqueous chemical method , 2010 .

[27]  Synthesis and Controlled Growth of ZnO Nanorods Based Hybrid Device Structure by Aqueous Chemical Method , 2010 .

[28]  Heinz Kalt,et al.  65 years of ZnO research – old and very recent results , 2010 .

[29]  W. Schade,et al.  Hybrid LEDs based on ZnO‐nanowire arrays , 2010 .

[30]  Low-Temperature Chemical Growth of ZnO Nanorods with Enhanced UV Emission on Plastic Substrates , 2010 .

[31]  Magnus Willander,et al.  Luminescence from Zinc Oxide Nanostructures and Polymers and their Hybrid Devices , 2010, Materials.