A solid hydraulically amplified piezoelectric microvalve

We report a piezoelectrically driven and hydraulically amplified axial polymer microvalve. The microvalve is normally open and is assembled primarily with stereolithographically fabricated polymer components. An incompressible elastomer is used as a solid hydraulic medium to convert the small axial displacement of a piezoelectric actuator into a large valve head stroke while maintaining a large blocking force. Also, the axial design of the microvalve enables densely packed valve arrays. One application of this microvalve is in pneumatic tactile displays, which operates against gas pressure up to approximately 90 kPa and switching speed between 1 and 200 Hz. The current valve design has a maximum static hydraulic amplification ratio of 5 at 30 V driving voltage and a maximum valve head stroke of 37 μm at 150 V. Under a 94.4 kPa differential pressure, the flow rate of the valve and the closing voltage measure are 785 mL min −1 and 150 V, respectively. The function of the microvalve as an on‐off switch for a pneumatic microbubble tactile actuator is demonstrated. (Some figures in this article are in colour only in the electronic version)

[1]  F. Millero,et al.  Compressibility of water as a function of temperature and pressure , 1973 .

[2]  Masayoshi Esashi,et al.  Normally closed microvalve and mircopump fabricated on a silicon wafer , 1989 .

[3]  Eui-Hyeok Yang,et al.  Fabrication, characterization, and computational modeling of a piezoelectrically actuated microvalve for liquid flow control , 2006, Journal of Microelectromechanical Systems.

[4]  Indrani Chakraborty,et al.  MEMS Micro Valve for Space Applications , 2000 .

[5]  M.G. Allen,et al.  A Portable Pneumatically-Actuated Refreshable Braille Cell , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[6]  Masayoshi Esashi,et al.  Normally close microvalve and micropump fabricated on a silicon wafer , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[7]  M. L. Meyer.  Mechanics of Materials: F.R. Shanley, McGraw-Hill, New York (1967) 455pp, 92s , 1967 .

[8]  H. Siesler,et al.  Low‐Temperature FT‐NIR Spectroscopy of Strain‐Induced Orientation and Crystallization in a Poly(dimethylsiloxane) Network , 2005 .

[9]  H. Ernst,et al.  Novel approaches to particle tolerant valves for use in drug delivery systems , 2005 .

[10]  Werner Karl Schomburg,et al.  Polymer micro valve with a hydraulic piezo-drive fabricated by the AMANDA process , 2004 .

[11]  Choonsup Lee,et al.  Normally-closed, leak-tight piezoelectric microvalve under ultra-high upstream pressure for integrated micropropulsion , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[12]  J. Mueller,et al.  Leak-tight piezoelectric microvalve for high-pressure gas micropropulsion , 2004, Journal of Microelectromechanical Systems.

[13]  Guggi Kofod,et al.  Dielectric elastomer actuators , 2001 .

[14]  Thomas G. Bifano,et al.  Development of a MEMS microvalve array for fluid flow control , 1998 .

[15]  Makoto Ishida,et al.  A MEMS microvalve with PDMS diaphragm and two-chamber configuration of thermo-pneumatic actuator for integrated blood test system on silicon , 2005 .

[16]  M. Capanu,et al.  Design, fabrication, and testing of a bistable electromagnetically actuated microvalve , 2000, Journal of Microelectromechanical Systems.

[17]  U. Schaber,et al.  Pneumatic Silicon Microvalves with Piezoelectric Actuation , 2001 .

[18]  John D. Busch,et al.  A Silicon-Based Shape Memory Alloy Microvalve , 1992 .

[19]  Jeung Sang Go,et al.  A disposable, dead volume-free and leak-free in-plane PDMS microvalve☆ , 2004 .

[20]  M. Shikida,et al.  Electrostatically driven gas valve with high conductance , 1994 .

[21]  J. L. Steyn,et al.  A piezoelectric microvalve for compact high-frequency, high-differential pressure hydraulic micropumping systems , 2003 .

[22]  T. Goettschea,et al.  Novel approaches to particle tolerant valves for use in drug delivery systems , 2004 .

[23]  L. Treloar,et al.  Stresses and Birefringence in Rubber subjected to General Homogeneous Strain , 1948 .

[24]  Nesbitt W. Hagood,et al.  Fabrication of a high frequency piezoelectric microvalve , 2004 .

[25]  J. E. Mark.  Some interesting things about polysiloxanes. , 2004, Accounts of chemical research.

[26]  Bruce C. Towe,et al.  A shape memory alloy microvalve with flow sensing , 2006 .

[27]  Albert K. Henning,et al.  A thermopneumatically actuated microvalve for liquid expansion and proportional control , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[28]  H. Jerman,et al.  Electrically-activated, micromachined diaphragm valves , 1990, IEEE 4th Technical Digest on Solid-State Sensor and Actuator Workshop.