论文信息 - Optimization of kinematic errors model used in virtual CMM systems - 字舞流文

Optimization of kinematic errors model used in virtual CMM systems

Adam Gąska | Wiktor Harmatys | Piotr Gąska | Maciej Gruza | Jerzy Sładek | Ksenia Ostrowska

[1] Adam Gąska,et al. Validation model for coordinate measuring methods based on the concept of statistical consistency control , 2016 .

[2] Gianfranco Genta,et al. Measurement uncertainty assessment of Coordinate Measuring Machines by simulation and planned experimentation , 2011 .

[3] A. Weckenmann,et al. Productive Metrology - Adding Value to Manufacture , 2005 .

[4] Adam Gąska,et al. Modeling of the residual kinematic errors of coordinate measuring machines using LaserTracer system , 2014 .

[5] Adam Gąska,et al. Virtual CMM-based model for uncertainty estimation of coordinate measurements performed in industrial conditions , 2017 .

[6] Sonko Osawa,et al. Multiple orientation technique for the calibration of cylindrical workpieces on CMMs , 2005 .

[7] Masaharu Komori,et al. Calibration and uncertainty evaluation of single pitch deviation by multiple-measurement technique , 2010 .

[8] Robert G. Wilhelm,et al. Task Specific Uncertainty in Coordinate Measurement , 2001 .

[9] A Weckenmann,et al. Monitoring coordinate measuring machines by calibrated parts , 2005 .

[10] J. Sładek,et al. Evaluation of coordinate measurement uncertainty with use of virtual machine model based on Monte Carlo method , 2012 .