Improving the mechanical properties and thermal shock resistance of W-Y2O3 composites by two-step high-energy-rate forging

[1]  Longqing Chen,et al.  Combining the K-bubble strengthening and Y-doping: Microstructure, mechanical/thermal properties, and thermal shock behavior of W-K-Y alloys , 2021, International Journal of Refractory Metals and Hard Materials.

[2]  X. Xi,et al.  Effects of formation of complex oxide dispersions on mechanical properties and microstructure of multi-doped W alloys , 2021 .

[3]  C. S. Liu,et al.  Fabrication and stability of ultrafine ZrC nanoparticles dispersion strengthened sub-micrometer grained W alloy , 2021 .

[4]  Z. Chen,et al.  Response of yttria dispersion strengthened tungsten simultaneously exposed to steady-state and transient hydrogen plasma , 2020, Nuclear Fusion.

[5]  Yue Wang,et al.  The superior thermal stability and tensile properties of hot rolled W-HfC alloys , 2019, International Journal of Refractory Metals and Hard Materials.

[6]  G. Lu,et al.  Recent studies of tungsten-based plasma-facing materials in the linear plasma device STEP , 2019, Tungsten.

[7]  C. Liu,et al.  Design of highly thermal-shock resistant tungsten alloys with nanoscaled intra- and inter-type K bubbles , 2019, Journal of Alloys and Compounds.

[8]  Xiaoliang Yang,et al.  High thermal shock resistance realized by Ti/TiH2 doped tungsten-potassium alloys , 2019, Journal of Alloys and Compounds.

[9]  G. Lu,et al.  Surface modification and deuterium retention of high energy rate forging W-Y2O3exposed to deuterium plasma , 2018, Journal of Nuclear Materials.

[10]  R. Liu,et al.  Recent progress on the R&D of W-ZrC alloys for plasma facing components in fusion devices , 2018, Nuclear Materials and Energy.

[11]  H. Greuner,et al.  European divertor target concepts for DEMO: Design rationales and high heat flux performance , 2018, Nuclear Materials and Energy.

[12]  Xiang Liu,et al.  Mechanical properties and thermal shock performance of W-Y2O3 composite prepared by high-energy-rate forging , 2017 .

[13]  H. Kurishita,et al.  The high-flux effect on deuterium retention in TiC and TaC doped tungsten at high temperatures , 2017 .

[14]  Xiaoxin Zhang,et al.  Preparation of pure tungsten via various rolling methods and their influence on macro-texture and mechanical properties , 2017 .

[15]  S. Zinkle,et al.  Introduction to the special issue on the technical status of materials for a fusion reactor , 2017 .

[16]  B. He,et al.  Preparation and thermal shock characterization of yttrium doped tungsten-potassium alloy , 2016 .

[17]  Xiaoxin Zhang,et al.  Evolution of hot rolling texture in pure tungsten and lanthanum oxide doped tungsten with various reductions , 2016 .

[18]  K. Tokunaga,et al.  Properties of Lu2O3 doped tungsten and thermal shock performance , 2016 .

[19]  C. S. Liu,et al.  Mechanical properties and microstructures of W-1%Y2O3 microalloyed with Zr , 2016 .

[20]  Zhangjian Zhou,et al.  Thermal shock behavior of fine grained W–Y 2 O 3 materials fabricated via two different manufacturing technologies , 2016 .

[21]  X. P. Wang,et al.  Extraordinary high ductility/strength of the interface designed bulk W-ZrC alloy plate at relatively low temperature , 2015, Scientific Reports.

[22]  Zhangjian Zhou,et al.  Effect of hot rolling on the microstructure and fracture behavior of a bulk fine-grained W–Y2O3 alloy , 2015 .

[23]  X. P. Wang,et al.  Effect of high temperature swaging and annealing on the mechanical properties and thermal conductivity of W–Y2O3 , 2015 .

[24]  N. Baluc,et al.  Investigation of microstructure and mechanical properties of W-Y and W-Y2O3 materials fabricated by powder metallurgy method , 2015 .

[25]  Pengfei Li,et al.  Micro/nano composited tungsten material and its high thermal loading behavior , 2014 .

[26]  C. S. Liu,et al.  Characterization of ODS-tungsten microwave-sintered from sol-gel prepared nano-powders , 2014 .

[27]  Y. Dai,et al.  Mechanical properties of tungsten in the transition temperature range , 2014 .

[28]  J. Linke,et al.  Performance of yttrium doped tungsten under ‘edge localized mode’-like loading conditions , 2014 .

[29]  R. Valiev,et al.  Refinement of tungsten microstructure upon severe plastic deformation , 2014, The Physics of Metals and Metallography.

[30]  J. Laan,et al.  Development of Tungsten and Tungsten Alloys for DEMO Divertor Applications via MIM Technology , 2013 .

[31]  J. Linke,et al.  Thermal shock response of deformed and recrystallised tungsten , 2013 .

[32]  J. Linke,et al.  Basic characterization of oxide dispersion strengthened fine-grained tungsten based materials fabricated by mechanical alloying and spark plasma sintering , 2012 .

[33]  Michael Rieth,et al.  Tungsten foil laminate for structural divertor applications – Basics and outlook , 2012 .

[34]  N. Baluc,et al.  W–2 wt.%Y2O3 composite: Microstructure and mechanical properties , 2012 .

[35]  K. Kurzydłowski,et al.  Phase stability, point defects, and elastic properties of W-V and W-Ta alloys , 2011 .

[36]  V. Philipps.  Tungsten as material for plasma-facing components in fusion devices , 2011 .

[37]  J. Linke,et al.  Performance of different tungsten grades under transient thermal loads , 2011 .

[38]  M. Muhammed,et al.  Chemically produced nanostructured ODS–lanthanum oxide–tungsten composites sintered by spark plasma , 2011 .

[39]  C. Ambrosch-Draxl,et al.  Effect of rhenium on the dislocation core structure in tungsten. , 2010, Physical review letters.

[40]  M. A. Monge,et al.  Mechanical Behavior of W-Y2O3 and W-Ti Alloys from 25 °C to 1000 °C , 2009 .

[41]  Q. Wei,et al.  Effect of low-temperature rolling on the tensile behavior of commercially pure tungsten , 2008 .

[42]  T. Polcar,et al.  Structural and tribological characterization of tungsten nitride coatings at elevated temperature , 2008 .

[43]  H. Kurishita,et al.  Processing of fine-grained W materials without detrimental phases and their mechanical properties at 200–432 K , 2008 .

[44]  P. Sun,et al.  Deformation induced grain boundaries in commercially pure aluminium , 2000 .

[45]  Hiroaki Kurishita,et al.  Microstructure and impact properties of ultra-fine grained tungsten alloys dispersed with TiC , 1999 .

[46]  A. Loarte,et al.  The impact of ELMs on the ITER divertor , 1998 .

[47]  M. Rieth,et al.  Mechanical properties of tungsten: Recent research on modified tungsten materials in Japan , 2021 .

[48]  T. Shen,et al.  Microstructure and tensile properties of tungsten at elevated temperatures , 2016 .

[49]  Zhangjian Zhou,et al.  Effect of rare earth elements on the consolidation behavior and microstructure of tungsten alloys , 2015 .

[50]  D. Armstrong,et al.  Hardening of self ion implanted tungsten and tungsten 5-wt% rhenium , 2013 .

[51]  Huijun Li,et al.  Recent progress in research on tungsten materials for nuclear fusion applications in Europe , 2013 .