Hot deformation behavior of spray-deposited Al-Zn-Mg-Cu alloy

[1]  Junwen Zhao,et al.  Foundation and application of Al–Zn–Mg–Cu alloy flow stress constitutive equation in friction screw press die forging , 2013 .

[2]  Bin Tang,et al.  Deformation and dynamic recrystallization behavior of a high Nb containing TiAl alloy , 2013 .

[3]  Y. C. Lin,et al.  Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy , 2013 .

[4]  F. Pan,et al.  Constitutive modeling of dynamic recrystallization kinetics and processing maps of Mg–2.0Zn–0.3Zr alloy based on true stress–strain curves , 2013 .

[5]  Fuguo Li,et al.  Flow behavior modeling of the 7050 aluminum alloy at elevated temperatures considering the compensation of strain , 2012 .

[6]  Q. Pan,et al.  Characterization of flow behavior and microstructural evolution of Al–Zn–Mg–Sc–Zr alloy using processing maps , 2012 .

[7]  P. Ma,et al.  Influence of second phases on mechanical properties of spray-deposited Al–Zn–Mg–Cu alloy , 2012 .

[8]  W. M. Rainforth,et al.  Flow softening behavior during dynamic recrystallization in Mg–3Al–1Zn magnesium alloy , 2012 .

[9]  Ji-shan Zhang,et al.  Enhanced grain refinement in AA7050 Al alloy by deformation-induced precipitation , 2012 .

[10]  Yong Liu,et al.  Constitutive relationship for high temperature deformation of powder metallurgy Ti-47Al-2Cr-2Nb-0.2W alloy , 2012 .

[11]  Ali A. Roostaei,et al.  Constitutive base analysis of a 7075 aluminum alloy during hot compression testing , 2011 .

[12]  Gang Wang,et al.  Flow behavior and microstructure evolution of a P/M TiAl alloy during high temperature deformation , 2011 .

[13]  Z. Ning,et al.  Microstructural evolution during extrusion and ECAP of a spray-deposited Al–Zn–Mg–Cu–Sc–Zr alloy , 2010 .

[14]  H. Zoch,et al.  Deformation behavior of spray-formed hypereutectic Al–Si alloys , 2010 .

[15]  L. Hongwei,et al.  Microstructure and mechanical properties of spray-deposited Al–Zn–Mg–Cu alloy processed through hot rolling and heat treatment , 2009 .

[16]  Bin Liu,et al.  Constitutive modeling and processing map for elevated temperature flow behaviors of a powder metallurgy titanium aluminide alloy , 2009 .

[17]  Yi Han,et al.  Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature , 2009 .

[18]  K. V. Kasiviswanathan,et al.  Constitutive equations to predict high temperature flow stress in a Ti-modified austenitic stainless steel , 2009 .

[19]  Binggang Zhang,et al.  Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation , 2008 .

[20]  Jue Zhong,et al.  Constitutive modeling for elevated temperature flow behavior of 42CrMo steel , 2008 .

[21]  M. Ashraf,et al.  Effect of heat treatment and stress relaxation in 7075 aluminum alloy , 2007 .

[22]  Q. Meng,et al.  The microstructural evolution of an Al–Zn–Mg–Cu alloy during homogenization , 2006 .

[23]  T. Eden,et al.  Aging response of Al-Zn-Mg-Cu spray formed alloys and their metal matrix composites , 2006 .

[24]  Jie Dong,et al.  A new way to cast high-alloyed Al–Zn–Mg–Cu–Zr for super-high strength and toughness , 2006 .

[25]  Timothy J. Eden,et al.  Mesoscopic structure control of spray formed high strength Al–Zn–Mg–Cu alloys , 2005 .

[26]  B. Xiong,et al.  Research on Ultra-High Strength Al-11Zn-2.9Mg-1.7Cu Alloy Prepared by Spray Forming Process , 2005 .

[27]  H. J. McQueen,et al.  Constitutive analysis in hot working , 2002 .

[28]  M. Lusk,et al.  Comparison of Johnson-Mehl-Avrami-Kologoromov kinetics with a phase-field model for microstructural evolution driven by substructure energy , 1997 .

[29]  A. Jackson,et al.  Constitutive equations for use in prediction of flow stress during extrusion of aluminium alloys , 1997 .

[30]  E. Cerri,et al.  Comparative hot workability of 7012 and 7075 alloys after different pretreatments , 1995 .

[31]  Alan K. Miller,et al.  Flow stress, subgrain size, and subgrain stability at elevated temperature , 1977 .

[32]  W. Fahrenholtz,et al.  Effect of alkaline cleaning and activation on aluminum alloy 7075-T6 , 2011 .

[33]  B. Baroux,et al.  Influence of alloy composition and heat treatment on precipitate composition in Al–Zn–Mg–Cu alloys , 2010 .

[34]  T. Sakai,et al.  Flow softening of 7075 aluminum alloy under hot compression , 1991 .