In this work an atmospheric pressure non-thermal resistive barrier (RB) plasma jet was constructed, characterized and was applied for biomedical applications. The RB plasma source can operate in both DC (battery) as well as in standard 60/50 Hz low frequency AC excitation, and it functions effectively in both direct and indirect plasma exposure configurations. The characteristics of the RB plasma jet such as electrical properties, plasma gas temperature and nitric oxides concentration were determined using voltage-current characterization, optical emission spectroscopy and gas analyzer diagnostic techniques. Plasma discharge power of 26.33 W was calculated from voltage-current characterization. An optical emission spectroscopy was applied and the gas temperature which is equivalent to the nitrogen rotational (Trot) temperatures was measured. The concentrations of the reactive oxygen species at different spatial distances from the tip of the plasma jet were measured and the ppm concentration of NO is at the preferred level for a wide range of standard biomedical treatment applications. The ppm values of nitric oxides after the cooling unit are observed to be of the same order of magnitude as compared to plasma jet. The portable RB plasma source was tested to be very effective for decontamination and disinfection of a wide range of foodborne and opportunistic nosocomial pathogens such as Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Bacillus cereus and the preliminary results are presented. The effects of indirect exposure of the portable RBP source on monocytic leukemia cancer cells (THP-1) were also tested and the results demonstrate that a preference for apoptosis in plasma treated THP-1 cells under particular plasma parameters and dosage levels.