Experimental and numerical analyses on thermal performance of different typologies of PCMs integrated in the roof space

Abstract The study investigates the thermal performances of Phase Change Materials (PCM) integrated in a roof space to be used as a residential attic in Torino, Italy. Three different solutions were applied to a roof continuously monitored under summer climatic conditions. The roof was divided into three portions, one, the bare roof, representing the reference case without PCMs, the other two integrating two PCM’s typologies with different melting/solidification temperatures range. A numerical model was furthermore developed implementing the equivalent capacitance numerical method to describe the substance phase transition and the measured data set were used for its validation. The study demonstrates that PCM-enhanced components are a promising solution toward a higher thermal performance efficiency in roof attic spaces during the summer season. Experimental results showed a reduction of the ongoing heat peak load between 13% and 59% depending on the PCM typology, highlighting that to reach the expected performance the proper PCM type should be carefully selected.

[1]  Ian Beausoleil-Morrison,et al.  The adaptive coupling of heat and air flow modelling within dynamic whole-building simulation , 2000 .

[2]  Valentina Serra,et al.  Experimental Analysis of an External Dynamic Solar Shading Integrating PCMs: First Results , 2015 .

[3]  Francesco Patania,et al.  Thermal performance of ventilated roofs during summer period , 2012 .

[4]  Xu Xu,et al.  Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings , 2005 .

[5]  E. Benini,et al.  Thermal and electrical performance of an integrated PV-PCM system in double skin façades: A numerical study , 2016 .

[6]  Gian Luca Morini,et al.  Experimental analysis of the summer thermal performances of a naturally ventilated rainscreen façade building , 2014 .

[7]  Joseph Virgone,et al.  In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard , 2011 .

[8]  Farah Souayfane,et al.  Phase change materials (PCM) for cooling applications in buildings: A review , 2016 .

[9]  Baskar Ganapathysubramanian,et al.  Exploring future climate trends on the thermal performance of attics: Part 1 – Standard roofs , 2016 .

[10]  Anna Laura Pisello,et al.  Experimental in-lab and in-field analysis of waterproof membranes for cool roof application and urban heat island mitigation , 2016 .

[11]  Anna Laura Pisello,et al.  Thermal-energy analysis of roof cool clay tiles for application in historic buildings and cities , 2015 .

[12]  Luisa F. Cabeza,et al.  Economic impact of integrating PCM as passive system in buildings using Fanger comfort model , 2016 .

[13]  Valentina Serra,et al.  Thermal Performance Assessment of an Opaque Ventilated Façade in the Summer Period: Calibration of a Simulation Model through in-field Measurements ☆ , 2017 .

[14]  Anna Laura Pisello,et al.  Investigation on the effect of innovative cool tiles on local indoor thermal conditions: Finite element modeling and continuous monitoring , 2016 .

[15]  Nitin Shukla,et al.  Thermal load mitigation and passive cooling in residential attics containing PCM-enhanced insulations , 2014 .

[16]  Valentina Serra,et al.  Energy Assessment of A Pcm–Embedded Plaster: Embodied Energy Versus Operational Energy☆ , 2015 .

[17]  Marco Perino,et al.  Thermal bridges in vacuum insulation panels at building scale , 2017 .

[18]  Marco Perino,et al.  Vacuum Insulation Panels: Thermal Bridging Effects and Energy Performance in Real Building Applications☆ , 2015 .

[19]  K. S. Ong.  Temperature reduction in attic and ceiling via insulation of several passive roof designs , 2011 .

[20]  Matthias Haase,et al.  A numerical model to evaluate the thermal behaviour of PCM glazing systems , 2012 .

[21]  Per Heiselberg,et al.  Review of thermal energy storage technologies based on PCM application in buildings , 2013 .

[22]  Luisa F. Cabeza,et al.  Innovative cool roofing membrane with integrated phase change materials: Experimental characterization of morphological, thermal and optic-energy behavior , 2016 .

[23]  Y. Çengel.  Heat and Mass Transfer: A Practical Approach , 2006 .

[24]  Xiangfei Kong,et al.  Experimental research on a novel energy efficiency roof coupled with PCM and cool materials , 2016 .

[25]  Marco Perino,et al.  Coupling VIPs and ABPs: Assessment of Overall Thermal Performance in Building Wall Insulation☆ , 2015 .

[26]  Matthias Haase,et al.  A numerical model to evaluate the thermal behaviour of PCM glazing system configurations , 2012 .

[27]  R. Velraj,et al.  Experimental investigation and numerical simulation analysis on the thermal performance of a building roof incorporating phase change material (PCM) for thermal management , 2008 .

[28]  Lorenza Bianco,et al.  Wood Fiber vs Synthetic Thermal Insulation for Roofs Energy Retrofit: A Case Study in Turin, Italy ☆ , 2017 .