Process optimization in laser surface structuring of alumina

The efficacy of pulsed Nd:YAG laser for the laser surface structuring (dressing) of porous alumina ceramic was optimized using the Taguchi analytical procedure. The laser processing parameters like the pulse width, repetition rate and the scanning speed were evaluated and the factors essential to optimize the interdendritic porosity and grain size were predicted. The analysis of variance (ANOVA) helped to identify the processing parameters that contributed the most to minimize the porosity and maximize the grain size. The pulse repetition rate was the most significant factor in minimizing the interdendritic porosity while the scanning speed played a vital role in increasing the grain size. The Taguchi method could yield a combination of different process parameters that could be used to optimize the microstructural features.

[1]  M. S. Phadke,et al.  Optimization of product and process design for quality and cost , 1988 .

[2]  D. Northwood,et al.  Optimization of the electrolytic plasma oxidation processes for corrosion protection of magnesium alloy AM50 using the Taguchi method , 2007 .

[3]  E. Cappelli,et al.  Ceramic surface modifications induced by pulsed laser treatment , 2000 .

[4]  C. Wang,et al.  Optimization of Nd:YAG laser welding onto magnesium alloy via Taguchi analysis , 2005 .

[5]  Michel L. Autric,et al.  Laser induced surface modifications on ZrO2 ceramics , 1997 .

[6]  F. Stott,et al.  Flame-assisted laser surface treatment of refractory materials for crack-free densification , 2000 .

[7]  R. Vilar,et al.  Laser surface modification of hydroxyapatite and glass-reinforced hydroxyapatite. , 2004, Biomaterials.

[8]  Johannes Schneider,et al.  Surface modification of ceramics for improved tribological properties , 2000 .

[9]  Lennie E. N. Lim,et al.  Optimization of laser deep-hole drilling of Inconel 718 using the Taguchi method , 1993 .

[10]  Y. S. Tarng,et al.  Design optimization of cutting parameters for turning operations based on the Taguchi method , 1998 .

[11]  N. Dahotre,et al.  Effect of laser fluence on surface microstructure of alumina ceramic , 2006 .

[12]  R. N. Kackar,et al.  Off-line quality control in integrated circuit fabrication using experimental design , 1983 .

[13]  A. Bendell,et al.  Taguchi methods : applications in world industry , 1989 .

[14]  Narendra B. Dahotre,et al.  Prediction of solidification microstructures during laser dressing of alumina-based grinding wheel material , 2006 .

[15]  Shrikant V. Joshi,et al.  A statistical approach to determine process parameter impact in Nd : YAG laser drilling of IN718 and Ti-6Al-4V sheets , 2005 .

[16]  T. R. Bement,et al.  Taguchi techniques for quality engineering , 1995 .