Micro-Structural Analysis of Chip Formation During Orthogonal Machining of Al/SiCp Composites

Discontinuously Reinforced Aluminum (DRA) Composites form unique case from the research in metal cutting point of view. Reinforcement in these materials acts as macroscopic and isolated discontinuities in the path of the tool. The mechanism of chip formation for such materials is yet to be evolved completely. In this paper, the mechanism of chip formation during machining of Al/SiCp composites based on the micro-structural analysis of chips and chip roots is presented. It was evident that the mechanism involves initiation of a gross fracture on the chip free surface and its propagation toward the tool nose. The extent of propagation of gross fracture depends upon the cutting speed and volume of reinforcement in composites. A model of deformation of the material along the shear plane is presented in terms of a ratio of length of flow-type deformation on the shear plane to the total length of shear plane. Influence of volume of reinforcement in composites and cutting speed on the ratio was verified experimentally.

[1]  N. Ramakrishnan,et al.  Wear of rotary carbide tools in machining of Al/SiCp composites , 1999 .

[2]  C. Spaans.  A Treatise on the Streamlines and the Stress, Strain, and Strain Rate Distributions, and on Stability in the Primary Shear Zone in Metal Cutting , 1972 .

[3]  G. R. Ponkshe.  A New Explanation of the Phenomenon of Chip Curling During Machining , 1967 .

[4]  K. Weinert,et al.  A Consideration of Tool Wear Mechanism when Machining Metal Matrix Composites (MMC) , 1993 .

[5]  R. Recht.  Catastrophic Thermoplastic Shear , 1964 .

[6]  N. Ramakrishnan,et al.  Analysis of chip breaking during orthogonal machining of Al/SiCp composites , 1999 .

[7]  Benji Maruyama,et al.  The world still wont’t beat a path to your door: Transitioning DRA to the marketplace , 1999 .

[8]  D. Meister,et al.  Machining of Fibre and Particle-Reinforced Aluminium , 1992 .

[9]  Kazuo Nakayama,et al.  Machining Characteristics of Hard Materials , 1988 .

[10]  H. E. Enahoro,et al.  An investigation of the transition from a continuous to a discontinuous chip in orthogonal machining , 1961 .

[11]  L. De Chiffre,et al.  What Can We Do About Chip Formation Mechanics , 1985 .

[12]  T. Matsuo,et al.  An Analysis of Saw-Toothed Chip Formation , 1982 .

[13]  M. C. Shaw,et al.  Chip Formation in the Machining of Hardened Steel , 1993 .

[14]  M. K. Brun,et al.  Wear characteristics of various hard materials for machining sic-reinforced aluminum alloy , 1985 .

[15]  F. O. Rasch,et al.  Machinability of Particulate Aluminium Matrix Composites , 1992 .

[16]  Milton C. Shaw.  A new mechanism of plastic flow , 1980 .

[17]  S. R. Thompson,et al.  Evaluating the mechanical properties of commercial DRA , 1993 .

[18]  Benji Maruyama,et al.  Discontinuously reinforced aluminum: Current status and future direction , 1999 .

[19]  N. Ramakrishnan,et al.  Study of cutting forces while turning Al/SiCp composites using rotary carbide tools , 1998 .

[20]  M. El-Gallab,et al.  Machining of Al/SiC particulate metal-matrix composites , 1998 .

[21]  V. Kevorkijan.  Aluminum composites for automotive applications: A global perspective , 1999 .