Thermal performance of dwellings in Cyprus and approaches for energy conservation

[1]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[2]  Georgios A. Florides,et al.  Evolution of domestic dwellings in Cyprus and energy analysis , 2001 .

[3]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[4]  Ramazan Benrashid,et al.  DSC studies of new energy storage materials. Part 3. Thermal and flammability studies , 1994 .

[5]  Luisa F. Cabeza,et al.  Improvement of the thermal inertia of building materials incorporating PCM. Evaluation in the macroscale , 2013 .

[6]  S. Tassou,et al.  Measures used to lower building energy consumption and their cost effectiveness , 2002 .

[7]  Andreas Uihlein,et al.  Policy options towards an energy efficient residential building stock in the EU-27 , 2010 .

[8]  R. Royo,et al.  Experimental results and simulation with TRNSYS of a 7.2 kWp grid-connected photovoltaic system , 2011 .

[9]  Stelios Pashardes,et al.  Statistical analysis of wind speed and direction in Cyprus , 1995 .

[10]  V. V. Tyagi,et al.  PCM thermal storage in buildings: A state of art , 2007 .

[11]  Georgios A. Florides,et al.  The characteristics and the energy behaviour of the residential building stock of Cyprus in view of Directive 2002/91/EC , 2010 .

[12]  S. Kalogirou.  Solar Energy Engineering: Processes and Systems , 2009 .

[13]  M. Babich,et al.  DSC studies of new energy storage materials , 1993 .

[14]  Samar Jaber,et al.  Optimum, technical and energy efficiency design of residential building in Mediterranean region , 2011 .

[15]  Haifeng Guo,et al.  A new kind of phase change material (PCM) for energy-storing wallboard , 2008 .

[16]  D. Feldman,et al.  Thermal storage in drywall using organic phase-change material , 1987 .

[17]  Andreas Poullikkas,et al.  Implementation of distributed generation technologies in isolated power systems , 2007 .

[18]  Samar Jaber,et al.  Thermal and economic windows design for different climate zones , 2011 .

[19]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in buildings and the effect of adding awnings , 2012 .

[20]  Esam M. Alawadhi,et al.  Thermal analysis of a building brick containing phase change material , 2008 .

[21]  M. Assimakopoulos,et al.  On the relation between the energy and social characteristics of the residential sector , 2007 .

[22]  C. M. Shepherd.  Design of Primary and Secondary Cells II . An Equation Describing Battery Discharge , 1965 .

[23]  Soteris A. Kalogirou,et al.  Generation of typical meteorological year (TMY-2) for Nicosia, Cyprus , 2003 .

[24]  Luisa F. Cabeza,et al.  Experimental study on the performance of insulation materials in Mediterranean construction , 2010 .

[25]  Constantinos A. Balaras,et al.  Building typologies as a tool for assessing the energy performance of residential buildings A case , 2011 .

[26]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[27]  Fernando Frechoso,et al.  Economic and technical analysis of a hybrid wind fuel cell energy system , 2008 .

[28]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[29]  Mukesh Limbachiya,et al.  Vacuum insulation panels (VIPs) for building construction industry: a review of the contemporary developments and future directions , 2011 .

[30]  Great Britain. Foreign Office..  Census of population , 1988 .

[31]  Afif Hasan,et al.  Optimizing insulation thickness for buildings using life cycle cost , 1999 .

[32]  Luisa F. Cabeza,et al.  Materials used as PCM in thermal energy storage in buildings: A review , 2011 .

[33]  Svend Svendsen,et al.  Energy savings in Danish residential building stock , 2006 .

[34]  Christopher J. Koroneos,et al.  Cyprus energy system and the use of renewable energy sources , 2005 .

[35]  Ø. Ulleberg,et al.  TRNSYS simulation models for solar-hydrogen systems , 1997 .

[36]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[37]  Cai Zhe,et al.  Experimental research on the use of phase change materials in perforated brick rooms for cooling storage , 2013 .

[38]  Borislav Grubor,et al.  Dynamical simulation of PV/Wind hybrid energy conversion system , 2012 .

[39]  Luisa F. Cabeza,et al.  An approach to the simulation of PCMs in building applications using TRNSYS , 2005 .

[40]  Georgios A. Florides,et al.  Modeling of the modern houses of Cyprus and energy consumption analysis , 2000 .

[41]  Soteris A. Kalogirou,et al.  Energy analysis of buildings employing thermal mass in Cyprus , 2002 .

[42]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[43]  Theodoros Theodosiou,et al.  Feasibility of energy saving renovation measures in urban buildings. The impact of energy prices and the acceptable pay back time criterion , 2002 .

[44]  Kamal Abdel Radi Ismail,et al.  PCM THERMAL INSULATION IN BUILDINGS , 1997 .

[45]  Ø. Ulleberg,et al.  The wind/hydrogen demonstration system at Utsira in Norway: Evaluation of system performance using operational data and updated hydrogen energy system modeling tools , 2010 .

[46]  P. A. Pilavachi,et al.  Economic evaluation of energy saving measures in a common type of Greek building , 2009 .

[47]  Xin Wang,et al.  An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating , 2007 .