Rationalizing the Molecular Design of Hole‐Selective Contacts to Improve Charge Extraction in Perovskite Solar Cells

Two new hole selective materials (HSMs) based on dangling methylsulfanyl groups connected to the C‐9 position of the fluorene core are synthesized and applied in perovskite solar cells. Being structurally similar to a half of Spiro‐OMeTAD molecule, these HSMs (referred as FS and DFS) share similar redox potentials but are endowed with slightly higher hole mobility, due to the planarity and large extension of their structure. Competitive power conversion efficiency (up to 18.6%) is achieved by using the new HSMs in suitable perovskite solar cells. Time‐resolved photoluminescence decay measurements and electrochemical impedance spectroscopy show more efficient charge extraction at the HSM/perovskite interface with respect to Spiro‐OMeTAD, which is reflected in higher photocurrents exhibited by DFS/FS‐integrated perovskite solar cells. Density functional theory simulations reveal that the interactions of methylammonium with methylsulfanyl groups in DFS/FS strengthen their electrostatic attraction with the perovskite surface, providing an additional path for hole extraction compared to the sole presence of methoxy groups in Spiro‐OMeTAD. Importantly, the low‐cost synthesis of FS makes it significantly attractive for the future commercialization of perovskite solar cells.

[1]  G. Gigli,et al.  Sustainability of Organic Dye-Sensitized Solar Cells: The Role of Chemical Synthesis , 2015 .

[2]  Qiong Wang.  Fast Voltage Decay in Perovskite Solar Cells Caused by Depolarization of Perovskite Layer , 2018 .

[3]  Jenny Nelson,et al.  Nondispersive hole transport in amorphous films of methoxy-spirofluorene-arylamine organic compound , 2003 .

[4]  Tonio Buonassisi,et al.  A-Site Cation in Inorganic A3Sb2I9 Perovskite Influences Structural Dimensionality, Exciton Binding Energy, and Solar Cell Performance , 2018 .

[5]  Zhen Li,et al.  Hole-Transporting Materials for Perovskite Solar Cells , 2018, Asian Journal of Organic Chemistry.

[6]  R. Grisorio,et al.  On the Degradation Process Involving Polyfluorenes and the Factors Governing Their Spectral Stability , 2011 .

[7]  M. Grätzel,et al.  The Institute of Chemistry of Great Britain and Ireland. Journal and Proceedings. Part II: 1935 , 1935 .

[8]  Anders Hagfeldt,et al.  Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture , 2018, Science.

[9]  I. Mora‐Seró,et al.  Operating Mechanisms of Mesoscopic Perovskite Solar Cells through Impedance Spectroscopy and J-V Modeling. , 2017, The journal of physical chemistry letters.

[10]  M. Bawendi,et al.  Enhanced charge carrier mobility and lifetime suppress hysteresis and improve efficiency in planar perovskite solar cells , 2018, Energy & Environmental Science.

[11]  Steve Albrecht,et al.  How to Make over 20% Efficient Perovskite Solar Cells in Regular (n–i–p) and Inverted (p–i–n) Architectures , 2018, Chemistry of Materials.

[12]  G. Eperon,et al.  Charge Carriers in Planar and Meso-Structured Organic-Inorganic Perovskites: Mobilities, Lifetimes, and Concentrations of Trap States. , 2015, The journal of physical chemistry letters.

[13]  P. Qin,et al.  Dopant‐Free Hole‐Transporting Materials for Stable and Efficient Perovskite Solar Cells , 2017, Advanced materials.

[14]  Juliane Kniepert,et al.  Charge carrier recombination dynamics in perovskite and polymer solar cells , 2016 .

[15]  S. Manzhos,et al.  Molecular Engineering Using an Anthanthrone Dye for Low‐Cost Hole Transport Materials: A Strategy for Dopant‐Free, High‐Efficiency, and Stable Perovskite Solar Cells , 2018 .

[16]  Miguel Anaya,et al.  Origin of Light-Induced Photophysical Effects in Organic Metal Halide Perovskites in the Presence of Oxygen. , 2018, The journal of physical chemistry letters.

[17]  Peng Gao,et al.  Silolothiophene-linked triphenylamines as stable hole transporting materials for high efficiency perovskite solar cells , 2015 .

[18]  Luis M. Pazos-Outón,et al.  Research data supporting: "Enhancing photoluminescence yields in lead halide perovskites by photon recycling and light out-coupling" , 2016 .

[19]  N. Koch,et al.  Reduced Interface‐Mediated Recombination for High Open‐Circuit Voltages in CH3NH3PbI3 Solar Cells , 2017, Advanced materials.

[20]  Paul L. Burn,et al.  Electro-optics of perovskite solar cells , 2014, Nature Photonics.

[21]  Wei Huang,et al.  Materials toward the Upscaling of Perovskite Solar Cells: Progress, Challenges, and Strategies , 2018, Advanced Functional Materials.

[22]  F. Hui,et al.  Dopant‐Free Spiro‐Triphenylamine/Fluorene as Hole‐Transporting Material for Perovskite Solar Cells with Enhanced Efficiency and Stability , 2016 .

[23]  Anders Hagfeldt,et al.  Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide , 2016 .

[24]  Anders Hagfeldt,et al.  Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance , 2016, Science.

[25]  Nakita K. Noel,et al.  Enhanced photoluminescence and solar cell performance via Lewis base passivation of organic-inorganic lead halide perovskites. , 2014, ACS nano.

[26]  E. Mosconi,et al.  First-Principles Investigation of the TiO2/Organohalide Perovskites Interface: The Role of Interfacial Chlorine. , 2014, The journal of physical chemistry letters.

[27]  M. Johnston,et al.  Hybrid Perovskites for Photovoltaics: Charge-Carrier Recombination, Diffusion, and Radiative Efficiencies. , 2016, Accounts of chemical research.

[28]  Xiang-Dong Zhu,et al.  Hole‐Transporting Materials Incorporating Carbazole into Spiro‐Core for Highly Efficient Perovskite Solar Cells , 2018, Advanced Functional Materials.

[29]  Qiong Wang,et al.  Influence of a cobalt additive in spiro-OMeTAD on charge recombination and carrier density in perovskite solar cells investigated using impedance spectroscopy. , 2018, Physical chemistry chemical physics : PCCP.

[30]  Xudong Yang,et al.  A dopant-free hole-transporting material for efficient and stable perovskite solar cells , 2014 .

[31]  Juan Bisquert,et al.  Surface Recombination and Collection Efficiency in Perovskite Solar Cells from Impedance Analysis. , 2016, The journal of physical chemistry letters.

[32]  Edward H. Sargent,et al.  Challenges for commercializing perovskite solar cells , 2018, Science.

[33]  Anders Hagfeldt,et al.  Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells. , 2016, ACS nano.

[34]  Hongtao Yu,et al.  Effects of heteroatom substitution in spiro-bifluorene hole transport materials† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6sc00973e , 2016, Chemical science.

[35]  R. Grisorio,et al.  Exploring the surface chemistry of cesium lead halide perovskite nanocrystals. , 2019, Nanoscale.

[36]  Anders Hagfeldt,et al.  Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells , 2017 .

[37]  D. Kabra,et al.  Photophysical Model for Non-Exponential Relaxation Dynamics in Hybrid Perovskite Semiconductors , 2018 .

[38]  Anders Hagfeldt,et al.  Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5ee03874j Click here for additional data file. , 2016, Energy & environmental science.

[39]  Lin-Wang Wang,et al.  Design Principles for Trap-Free CsPbX3 Nanocrystals: Enumerating and Eliminating Surface Halide Vacancies with Softer Lewis Bases. , 2018, Journal of the American Chemical Society.

[40]  Xingyu Gao,et al.  Copper Salts Doped Spiro‐OMeTAD for High‐Performance Perovskite Solar Cells , 2016 .

[41]  L. Quan,et al.  SOLAR CELLS: Efficient and stable solution‐processed planar perovskite solar cells via contact passivation , 2017 .

[42]  Jinsong Huang,et al.  Charge Carrier Lifetimes Exceeding 15 μs in Methylammonium Lead Iodide Single Crystals. , 2016, The journal of physical chemistry letters.

[43]  Bernd Rech,et al.  Correlation between Electronic Defect States Distribution and Device Performance of Perovskite Solar Cells , 2017, Advanced science.

[44]  Alain Goriely,et al.  Recombination Kinetics in Organic-Inorganic Perovskites: Excitons, Free Charge, and Subgap States , 2014 .

[45]  A. Barker,et al.  Iodine chemistry determines the defect tolerance of lead-halide perovskites , 2018 .

[46]  G. Gigli,et al.  Influence of Keto Groups on the Optical, Electronic, and Electroluminescent Properties of Random Fluorenone-Containing Poly(fluorenylene-vinylene)s , 2008 .

[47]  T. Unold,et al.  Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells , 2018, Nature Energy.

[48]  Yasuhiro Yamada,et al.  Photocarrier recombination dynamics in perovskite CH3NH3PbI3 for solar cell applications. , 2014, Journal of the American Chemical Society.

[49]  Juan Bisquert,et al.  Properties of Contact and Bulk Impedances in Hybrid Lead Halide Perovskite Solar Cells Including Inductive Loop Elements , 2016 .

[50]  Anders Hagfeldt,et al.  Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells , 2016 .

[51]  Laura M Herz,et al.  High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites , 2013, Advanced materials.

[52]  Tae-Youl Yang,et al.  A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells , 2018, Nature Energy.

[53]  M. Deepa,et al.  Identifying the charge generation dynamics in Cs+-based triple cation mixed perovskite solar cells. , 2017, Physical chemistry chemical physics : PCCP.

[54]  F. De Angelis,et al.  First-Principles Modeling of Defects in Lead Halide Perovskites: Best Practices and Open Issues , 2018, ACS Energy Letters.

[55]  Peng Gao,et al.  A molecularly engineered hole-transporting material for efficient perovskite solar cells , 2016, Nature Energy.

[56]  A. Jen,et al.  4‐Tert‐butylpyridine Free Organic Hole Transporting Materials for Stable and Efficient Planar Perovskite Solar Cells , 2017 .

[57]  Nam-Gyu Park,et al.  Lewis Acid-Base Adduct Approach for High Efficiency Perovskite Solar Cells. , 2016, Accounts of chemical research.

[58]  L. Wan,et al.  A Two-Dimensional Hole-Transporting Material for High-Performance Perovskite Solar Cells with 20 % Average Efficiency. , 2018, Angewandte Chemie.

[59]  Molecular Tailoring of Phenothiazine-Based Hole-Transporting Materials for High-Performing Perovskite Solar Cells , 2017 .

[60]  Alberto Torres,et al.  Surface Effects and Adsorption of Methoxy Anchors on Hybrid Lead Iodide Perovskites: Insights for Spiro-MeOTAD Attachment , 2014 .

[61]  Anders Hagfeldt,et al.  Perovskite Solar Cells: From the Atomic Level to Film Quality and Device Performance. , 2018, Angewandte Chemie.

[62]  Wei‐Liang Chen,et al.  Origin of long lifetime of band-edge charge carriers in organic–inorganic lead iodide perovskites , 2017, Proceedings of the National Academy of Sciences.

[63]  Zhiqun Lin,et al.  Recent advances in interfacial engineering of perovskite solar cells , 2017 .

[64]  J. Bisquert,et al.  Light-Induced Space-Charge Accumulation Zone as Photovoltaic Mechanism in Perovskite Solar Cells. , 2016, The journal of physical chemistry letters.