Performance study of cooling plates with single and double outlets for lithium-ion battery thermal management system based on topology optimization

[1]  Zhiwu Huang,et al.  An intelligent digital twin model for the battery management systems of electric vehicles , 2023, International Journal of Green Energy.

[2]  Yubai Li,et al.  Effective Heat Dissipation for Prismatic Lithium-ion Battery by Fluorinated Liquid Immersion Cooling Approach , 2023, International Journal of Green Energy.

[3]  Hussein M. Maghrabie,et al.  Battery thermal management systems based on nanofluids for electric vehicles , 2022, Journal of Energy Storage.

[4]  B. K. Panigrahi,et al.  Heat transfer augmentation of lithium‐ion battery packs by incorporating an interrupted fin arrangement , 2022, International Journal of Energy Research.

[5]  N. Yilmaz.  Comparative energy and environmental assessment of battery technologies and alternative fuels in sustainable aviation , 2022, International Journal of Green Energy.

[6]  K. Sopian,et al.  Basics, properties, and thermal issues of EV battery and battery thermal management systems: Comprehensive review , 2022, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering.

[7]  J. Luo,et al.  Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review , 2022, Chemical Engineering Journal.

[8]  Junfeng Gu,et al.  A synergic topology optimization approach on distribution of cooling channels and diverse-intensity heat sources for liquid-cooled heat sink , 2022, Structural and Multidisciplinary Optimization.

[9]  Q.L. Yue,et al.  Advances in thermal management systems for next-generation power batteries , 2021, International Journal of Heat and Mass Transfer.

[10]  M. Ni,et al.  Enhancement of lithium-ion battery thermal management with the divergent-shaped channel cold plate , 2021 .

[11]  Yizhi Xiao,et al.  Topology optimization of cooling plates for battery thermal management , 2021 .

[12]  M. Berecibar,et al.  A comparative study between air cooling and liquid cooling thermal management systems for a high-energy lithium-ion battery module , 2021 .

[13]  T. Venugopal,et al.  Computational investigations of battery thermal management system with environmental effects employing a combination of phase change materials and forced air cooling , 2021, International Journal of Green Energy.

[14]  Ali Elham,et al.  Multi-objective topology optimization of pin-fin heat exchangers using spectral and finite-element methods , 2021, Structural and Multidisciplinary Optimization.

[15]  Chaoyi Wan,et al.  TSSR algorithm based battery space optimization on thermal management system , 2021 .

[16]  T. Amalesh,et al.  Introducing new designs of minichannel cold plates for the cooling of Lithium-ion batteries , 2020 .

[17]  Liang Gao,et al.  A Novel MOGA approach for power saving strategy and optimization of maximum temperature and maximum pressure for liquid cooling type battery thermal management system , 2020, International Journal of Green Energy.

[18]  A. Dhoble,et al.  A review on effect of heat generation and various thermal management systems for lithium ion battery used for electric vehicle , 2020 .

[19]  Xinyu Wang,et al.  Three-dimensional topology optimization of thermal-fluid-structural problems for cooling system design , 2020, Structural and Multidisciplinary Optimization.

[20]  Liu Cheng,et al.  Surrogate based multi-objective design optimization of lithium-ion battery air-cooled system in electric vehicles , 2020, Journal of Energy Storage.

[21]  Liang Gao,et al.  A Thompson Sampling Efficient Multi-Objective Optimization Algorithm (TSEMO) for Lithium-Ion Battery Liquid-Cooled Thermal Management System: Study of Hydrodynamic, Thermodynamic, and Structural Performance , 2020 .

[22]  Jihong Zhu,et al.  Topology optimization design of nanofluid-cooled microchannel heat sink with temperature-dependent fluid properties , 2020 .

[23]  A. Garg,et al.  A Thermal Investigation and Optimization of an Air-Cooled Lithium-Ion Battery Pack , 2020, Energies.

[24]  P. Budarapu,et al.  Studies on thermal management of Lithium-ion battery pack using water as the cooling fluid , 2020 .

[25]  Hiroki Kobayashi,et al.  Topology design of two-fluid heat exchange , 2020, ArXiv.

[26]  Liang Gao,et al.  Heat Transfer Efficiency Enhancement of Lithium-Ion Battery Packs by Using Novel Design of Herringbone Fins , 2020 .

[27]  Liang Gao,et al.  Battery Thermal Management System Design: Role of Influence of Nanofluids, Flow Directions, and Channels , 2020, Journal of Electrochemical Energy Conversion and Storage.

[28]  Hao Li,et al.  Experimental and numerical investigation of liquid-cooled heat sinks designed by topology optimization , 2019 .

[29]  Hao Li,et al.  Optimal design and thermal modelling for liquid-cooled heat sink based on multi-objective topology optimization: An experimental and numerical study , 2019 .

[30]  Wen Ye,et al.  Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger , 2019, International Journal of Heat and Mass Transfer.

[31]  Pan Mei,et al.  A novel approach for Lithium-ion battery thermal management with streamline shape mini channel cooling plates , 2019, Applied Thermal Engineering.

[32]  Qingsong Wang,et al.  A review of lithium ion battery failure mechanisms and fire prevention strategies , 2019, Progress in Energy and Combustion Science.

[33]  Xinyu Wang,et al.  Topology optimization of thermal–fluid problem using the MMC-based approach , 2019, Structural and Multidisciplinary Optimization.

[34]  Akhil Garg,et al.  A comprehensive analysis and optimization process for an integrated liquid cooling plate for a prismatic lithium-ion battery module , 2019, Applied Thermal Engineering.

[35]  Liang Gao,et al.  Multi‐objective design optimization for mini‐channel cooling battery thermal management system in an electric vehicle , 2019, International Journal of Energy Research.

[36]  Y. Ran,et al.  Novel leaf-like channels for cooling rectangular lithium ion batteries , 2019, Applied Thermal Engineering.

[37]  Weixiong Wu,et al.  A critical review of battery thermal performance and liquid based battery thermal management , 2019, Energy Conversion and Management.

[38]  Chen Xu,et al.  Mass Maldistribution Research of Different Internal Flowing Channels in the Cooling Plate Applied to Electric Vehicle Batteries , 2019, Applied Sciences.

[39]  Chengyi Song,et al.  Temperature effect and thermal impact in lithium-ion batteries: A review , 2018, Progress in Natural Science: Materials International.

[40]  Francesco Montomoli,et al.  Three-dimensional fluid topology optimization for heat transfer , 2018, Structural and Multidisciplinary Optimization.

[41]  Y. Ran,et al.  Study on thermal management of rectangular Li-ion battery with serpentine-channel cold plate , 2018, International Journal of Heat and Mass Transfer.

[42]  Wei Wang,et al.  Topology optimization of fluid flow channel in cold plate for active phased array antenna , 2018 .

[43]  M. Carvalho,et al.  The lithium-ion battery: State of the art and future perspectives , 2018, Renewable and Sustainable Energy Reviews.

[44]  Weixiong Wu,et al.  Thermal management optimization of a prismatic battery with shape-stabilized phase change material , 2018, International Journal of Heat and Mass Transfer.

[45]  O. Sigmund,et al.  Density based topology optimization of turbulent flow heat transfer systems , 2018, Structural And Multidisciplinary Optimization.

[46]  Jiyun Zhao,et al.  Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review , 2017 .

[47]  Zhonghao Rao,et al.  Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling , 2016 .

[48]  Emílio Carlos Nelli Silva,et al.  Development of heat sink device by using topology optimization , 2013 .

[49]  Gilles Marck,et al.  Topology Optimization of Heat and Mass Transfer Problems: Laminar Flow , 2013 .

[50]  Anthony Jarrett,et al.  Design optimization of electric vehicle battery cooling plates for thermal performance , 2011 .

[51]  P. Cheng,et al.  Conjugate heat transfer in fractal-shaped microchannel network heat sink for integrated microelectronic cooling application , 2007 .

[52]  J. Petersson,et al.  Topology optimization of fluids in Stokes flow , 2003 .

[53]  Jiao Wang,et al.  Topology optimization design and numerical analysis on cold plates for lithium-ion battery thermal management , 2022, International Journal of Heat and Mass Transfer.