Sub-20nm lithography negative tone chemically amplified resists using cross-linker additives

Here, we report the highest recorded resolution for a negative-tone, carbon-based, chemically amplified (CA) resist of 20 nm half-pitch (HP) using both E-beam and EUV exposure systems. The new chemistry incorporates variable amounts of oxetane (0, 5, 10 and 20%) cross-linker into a base of Noria-MAd (methyl-admantane) molecular resist. Cross-linkable resists showed simultaneous improvements in surface energy, structural integrity, and swelling to ensure collapse free 20nm HP patterns and line-edge roughness (LER) down to 2.3 nm. EUV exposed Noria-Ox (5%) cross-linked resist patterns demonstrated 5 times improvement in Z-factor (for 24 nm HP) over Noria-MAd alone.

[1]  Weiqiang Wu,et al.  Comparison of acid generation in EUV lithography films of poly(4-hydroxystyrene) (PHS) and noria adamantyl ester (Noria-AD(50)). , 2012, The journal of physical chemistry. B.

[2]  Yuki Kato,et al.  Negative-type extreme ultraviolet Resist Materials based on Water-Wheel-like Cyclic Oligomer (Noria) , 2010 .

[3]  S. Satija,et al.  Neutron reflectivity characterization of the photoacid reaction-diffusion latent and developed images of molecular resists for extreme ultraviolet lithography. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[4]  S. Tagawa,et al.  Radiation Chemistry in Chemically Amplified Resists , 2010 .

[5]  Martha I. Sanchez,et al.  Extendibility of chemically amplified resists: another brick wall? , 2003, SPIE Advanced Lithography.

[6]  Kenneth A. Goldberg,et al.  22-nm Half-pitch extreme ultraviolet node development at the SEMATECH Berkeley microfield exposure tool , 2009 .

[7]  Tadatomi Nishikubo,et al.  Recent Development in Molecular Resists for Extreme Ultraviolet Lithography , 2011 .

[8]  S. Tagawa,et al.  Analysis of Dose-Pitch Matrices of Line Width and Edge Roughness of Chemically Amplified Fullerene Resist , 2011 .

[9]  S. Babin,et al.  Application of analytic scanning electron microscopy to critical dimensions metrology at nanometer scale , 2010 .

[10]  Eric M. Gullikson,et al.  Absorbance measurement of polymers at extreme ultraviolet wavelength: Correlation between experimental and theoretical calculations , 2006 .

[11]  R. Sooriyakumaran,et al.  A Fundamental Study on Dissolution Behavior of High-Resolution Molecular Glass Photoresists , 2008 .

[12]  Elsa Reichmanis,et al.  Chemical Amplification Mechanisms for Microlithography , 1991 .

[13]  J. Thackeray.  Materials challenges for sub-20-nm lithography , 2011 .

[14]  Kouji Mitani,et al.  Molecular waterwheel (noria) from a simple condensation of resorcinol and an alkanedial. , 2006, Angewandte Chemie.

[15]  C. Hansen,et al.  The three dimensional solubility parameter - key to paint component affinities: I. Solvents, plasticizers, polymers, and resins , 1967 .

[16]  T. Nishikubo,et al.  Novel extreme ultraviolet (EUV)-resist material based on noria (water wheel-like cyclic oligomer) , 2010 .