论文信息 - Shielding effects in microstrip discontinuities

Shielding effects in microstrip discontinuities

As an application of the theoretical method described in a companion paper L.P. Dunleavy and P.B. Katehi (ibid., vol.36, no.12, p.1758-66, 1988), numerical and measured results for open-end and series gap discontinuities and a coupled line filter are presented. Comparisons are also made to predictions obtained with commercially available CAD packages. The results verify the accuracy of the theoretical method and demonstrate the effects of shielding on discontinuity behavior. The experimental techniques used, which involve the through-short-delay de-embedding approach, are explained. >

P. B. Katehi | L. P. Dunleavy | P. Katehi | L. Dunleavy

[1] R.L. Eisenhart. A Better Microstrip Connector , 1978, 1978 IEEE-MTT-S International Microwave Symposium Digest.

[2] T. Itoh. Analysis of Microstrip Resonators , 1974 .

[3] L.P. Dunleavy,et al. Repeatability Issues for De-Embedding Microstrip Discontinuity S-Parameter Measurements by the TSD Technique , 1986, 27th ARFTG Conference Digest.

[4] E. Yamashita,et al. Analysis of Microstrip-Like Transmission Lines by Nonuniform Discretization of Integral Equations , 1976 .

[5] Sandro Ridella,et al. Launcher and microstrip characterization , 1976, IEEE Transactions on Instrumentation and Measurement.

[6] Norman R. Franzen,et al. A New Procedure for System Calibration and Error Removal in Automated S-Parameter Measurements , 1975, 1975 5th European Microwave Conference.

[7] G. F. Engen,et al. Thru-Reflect-Line: An Improved Technique for Calibrating the Dual Six-Port Automatic Network Analyzer , 1979 .