NMR imaging of continuous and intermittent drying of pasta

Abstract An NMR imaging technique published in literature was adapted to investigate the role of glass transition on Fickian and non-Fickian modes of moisture transport in pasta. The modified technique allowed measuring the moisture distribution in samples with initial moisture content from 10% to 50% or higher. A change in slope in the signal intensity versus moisture content curves indicated different state or distribution of water in pasta samples below 16.9% moisture content for both 22 °C and 40 °C data. Sharp shape of moisture content profiles during continuous drying experiments indicated non-Fickian moisture transport near the glass transition regime. With progress of drying at 40 °C, the moisture profiles became more round, as pasta approached towards the glassy state, which indicated Fickian transport. A sharp change in pasta’s moisture content during drying near glass transition caused a wide contrast in pasta’s mechanical properties across its cross-section, which may make it prone to stress-cracking. During intermittent drying, a wet layer near the surface of pasta samples was clearly observed, which caused greater amount of moisture loss than during continuous drying.

[1]  N. Ishida,et al.  Ontogenetic changes of the water status and accumulated soluble compounds in growing cherry fruits studied by NMR imaging , 1997 .

[2]  J. B. Litchfield,et al.  Measurement of Stress Cracking in Maize Kernels by Magnetic Resonance Imaging , 1994 .

[3]  James E. Maneval,et al.  NMR Imaging in the Study of Diffusion of Water in Foods , 1994 .

[4]  G Tomer,et al.  Measuring water distribution in extrudates using magnetic resonance imaging (MRI). , 1999, International journal of pharmaceutics.

[5]  Michael J. McCarthy,et al.  Magnetic resonance imaging applications in food research , 1990 .

[6]  K. Hayakawa,et al.  Rheological Properties Including Tensile Fracture Stress of Semolina Extrudates Influenced by Moisture Content , 1997 .

[7]  B P Hills,et al.  Quantitative radial imaging of porous particles beds with varying water contents. , 1994, Magnetic resonance imaging.

[8]  B. Hills,et al.  A quantitative study of water proton relaxation in packed beds of porous particles with varying water content. , 1994, Magnetic resonance imaging.

[9]  Arun S. Mujumdar,et al.  On the Intermittent Drying of an Agricultural Product , 2000 .

[10]  Anette Kistrup Thybo,et al.  Prediction of sensory texture quality attributes of cooked potatoes by NMR-imaging (MRI) of raw potatoes in combination with different image analysis methods , 2004 .

[11]  John H. Cushman,et al.  Multiscale fluid transport theory for swelling biopolymers , 2003 .

[12]  R. Ruan,et al.  Water in foods and biological materials : a nuclear magnetic resonance approach , 1998 .

[13]  L. D. Hall,et al.  Visualisation of the hydration of food by nuclear magnetic resonance imaging , 1995 .

[14]  N. Scheerlinck,et al.  Parameter estimation for moisture transport in apples with the aid of NMR imaging , 1998 .

[15]  K. M. Wright,et al.  Fast radial NMR microimaging studies of pasta drying , 1997 .

[16]  N. Peppas,et al.  Experimental verification of a predictive model of penetrant transport in glassy polymers , 1996 .

[17]  J. B. Litchfield,et al.  Three-dimensional microscopic MRI of maize kernels during drying , 1992 .

[18]  J. Litchfield,et al.  MOISTURE PROFILES IN A MODEL FOOD GEL DURING DRYING: MEASUREMENT USING MAGNETIC RESONANCE IMAGING AND EVALUATION OF THE HCKIAN MODEL , 1992 .