Probabilistic Energy Efficiency Analysis in Buildings Using Statistical Methods

[1]  Lisa Guan,et al.  Building energy optimisation under uncertainty using ACOMV algorithm , 2018 .

[2]  Lorenzo Pagliano,et al.  Identification of cost-optimal and NZEB refurbishment levels for representative climates and building typologies across Europe , 2018 .

[3]  Massimiliano Manfren,et al.  Probabilistic behavioral modeling in building performance simulation: A Monte Carlo approach , 2017 .

[4]  Symeon E. Christodoulou,et al.  Stochastic assessment of the energy performance of buildings , 2017 .

[5]  Massimiliano Manfren,et al.  Probabilistic behavioural modeling in building performance simulation—The Brescia eLUX lab , 2016 .

[6]  Farshad Kowsary,et al.  A novel approach for the simulation-based optimization of the buildings energy consumption using NSGA-II: Case study in Iran , 2016 .

[7]  Ali F. Alajmi,et al.  Efficient Genetic Algorithm sets for optimizing constrained building design problem , 2016 .

[8]  Tarik Kousksou,et al.  Energy consumption and efficiency in buildings: current status and future trends , 2015 .

[9]  Shideh Shams Amiri,et al.  Using multiple regression analysis to develop energy consumption indicators for commercial buildings in the U.S. , 2015 .

[10]  Burcin Becerik-Gerber,et al.  A model calibration framework for simultaneous multi-level building energy simulation , 2015 .

[11]  Ali Ahmadian,et al.  Optimal probabilistic energy management in a typical micro-grid based-on robust optimization and point estimate method , 2015 .

[12]  Laure Itard,et al.  Energy performance and comfort in residential buildings: Sensitivity for building parameters and occupancy , 2015 .

[13]  Di Wang,et al.  Application of multi-objective genetic algorithm to optimize energy efficiency and thermal comfort in building design , 2015 .

[14]  Staf Roels,et al.  Probabilistic design and analysis of building performances: methodology and application example , 2014 .

[15]  Sean N. Murray,et al.  Multi-variable optimization of thermal energy efficiency retrofitting of buildings using static modelling and genetic algorithms – A case study , 2014 .

[16]  Martin Tenpierik,et al.  A review into thermal comfort in buildings , 2013 .

[17]  Matjaž Dolšek,et al.  The impact of modelling uncertainties on the seismic performance assessment of reinforced concrete frame buildings , 2013 .

[18]  Massimiliano Manfren,et al.  Calibration and uncertainty analysis for computer models – A meta-model based approach for integrated building energy simulation , 2013 .

[19]  W. Stahel,et al.  Problems with Using the Normal Distribution – and Ways to Improve Quality and Efficiency of Data Analysis , 2011, PloS one.

[20]  Jack W. Baker,et al.  Incorporating modeling uncertainties in the assessment of seismic collapse risk of buildings , 2009 .

[21]  Jon Hand,et al.  CONTRASTING THE CAPABILITIES OF BUILDING ENERGY PERFORMANCE SIMULATION PROGRAMS , 2008 .

[22]  Charles J. Kibert,et al.  Sustainable Construction : Green Building Design and Delivery , 2005 .

[23]  P. Fanger,et al.  Extension of the PMV model to non-air-conditioned buildings in warm climates , 2002 .

[24]  Moncef Krarti,et al.  Energy Audit of Building Systems : An Engineering Approach , 2000 .

[25]  J. Stremel,et al.  Production Costing Using the Cumulant Method of Representing the Equivalent Load Curve , 1980, IEEE Transactions on Power Apparatus and Systems.

[26]  N. Cox.  Statistical Models in Engineering , 1970 .

[27]  Markus Lichtmeß,et al.  Energy performance of buildings: A statistical approach to marry calculated demand and measured consumption , 2019 .

[28]  Ali Reza Seifi,et al.  Probabilistic energy consumption analysis in buildings using point estimate method , 2018 .

[29]  Fu Xiao,et al.  Probabilistic approach for uncertainty-based optimal design of chiller plants in buildings ☆ , 2017 .

[30]  Marc Schiler,et al.  A method of probabilistic risk assessment for energy performance and cost using building energy simulation , 2016 .

[31]  Lars Junghans,et al.  Hybrid single objective genetic algorithm coupled with the simulated annealing optimization method for building optimization , 2015 .

[32]  Optimization under Economic Uncertainty using a Net-Zero Energy Commercial Office Case-Study , 2015 .

[33]  Philippe Rigo,et al.  A review on simulation-based optimization methods applied to building performance analysis , 2014 .

[34]  Christina J. Hopfe,et al.  Robust multi-criteria design optimization in building design , 2012 .

[35]  Tae Won Lee,et al.  A Reliability-Based Optimal Design Using Advanced First Order Second Moment Method , 1987 .

[36]  P. Fanger.  Moderate Thermal Environments Determination of the PMV and PPD Indices and Specification of the Conditions for Thermal Comfort , 1984 .