Assessment of partly circumferential cracks in pipes

This paper presents a new method for predicting the stress intensity factors around a partly circumferential elliptical surface crack in a pipe. The solution is applicable to structures with both double and single curvature. The technique involves a conformal transform in conjunction with a semi-analytical approach that uses a finite element model to obtain the stress distribution in the undamaged structure. By using an indirect methodology, the model development is simplified and the analysis time is minimised. As such a coarse mesh can be used to obtain solutions for multiple crack geometries. Three examples are presented to verify this methodology. They include a partly circumferential elliptical crack under uniform tension, a pipe subject to a residual stress field, and a problem involving double curvature. For simple loading the solution compares with other published solutions to within 5% for an external crack, and to within 15% for an internal crack. For more complex loading conditions the majority of the solutions were within 5% of other published results at the deepest point, and most solutions at the surface agreed to within 15%. For the problem involving double curvature, the solutions agreed to within 4% for an internal crack, and 15% for an external crack.

[1]  X. B. Lin,et al.  Shape evolution of surface cracks in fatigued round bars with a semicircular circumferential notch , 1999 .

[2]  James C. Newman,et al.  Stress-intensity Factors for Circumferential Surface Cracks in Pipes and Rods under Tension and Bending Loads , 1986 .

[3]  X. B. Lin,et al.  Fatigue growth simulation for cracks in notched and unnotched round bars , 1998 .

[4]  R. Forman,et al.  Growth behavior of surface cracks in the circumferential plane of solid and hollow cylinders , 1986 .

[5]  C Poette,et al.  Stress intensity factors and influence functions for circumferential surface cracks in pipes , 1991 .

[6]  Andrea Carpinteri,et al.  A three-parameter model for fatigue behaviour of circumferential surface flaws in pipes , 2000 .

[7]  G. C. Sih,et al.  Review of triaxial crack border stress and energy behavior , 1989 .

[8]  J. Newman,et al.  Stress-intensity factor equations for cracks in three-dimensional finite bodies subjected to tension and bending loads , 1984 .

[10]  F. Erdogan,et al.  Application of the line-spring model to a cylindrical shell containing a circumferential or axial part-through crack , 1982 .

[11]  Andrea Carpinteri,et al.  Circumferential surface flaws in pipes under cyclic axial loading , 1998 .

[12]  Paul F. Joseph,et al.  Surface cracks in toroidal shells , 1995 .

[13]  Susan Pitt,et al.  Weight functions, CTOD, and related solutions for cracks at notches , 2004 .

[14]  Satya N. Atluri,et al.  An Embedded Elliptical Crack, in an Infinite Solid, Subject to Arbitrary Crack-Face Tractions , 1981 .

[15]  F. M. Burdekin,et al.  Engineering critical analyses to BS 7910 — the UK guide on methods for assessing the acceptability of flaws in metallic structures , 2000 .

[16]  A. David Wunsch.  Complex variables with applications , 1983 .

[17]  J. Rice,et al.  The Part-Through Surface Crack in an Elastic Plate , 1972 .

[18]  Chuang-Yeh Yang.  Line Spring Method of Stress-Intensity Factor Determination for Surface Cracks in Plates Under Arbitrary In-Plane Stresses , 1988 .

[19]  R. Cordes,et al.  Surface and internal cracks in a residually stressed plate , 1994 .

[20]  M. Bergman,et al.  STRESS INTENSITY FACTORS FOR CIRCUMFERENTIAL SURFACE CRACKS IN PIPES , 1995 .

[21]  L. P. Pook,et al.  Some implications of corner point singularities , 1994 .

[22]  CALCULATION OF THE STRESS INTENSITY FACTOR FOR A PARTIAL CIRCUMFERENTIALLY CRACKED TUBE LOADED IN BENDING BY USING THE SHELL LINE‐SPRING MODEL , 1991 .